19-7012 70-1/2” 1/2” 0.025” 10/14 TPI Bi-Metal Reg Metal Cutting Blade

19-7013 70-1/2” 1/2” 0.025” 14/18 TPI Bi-Metal Reg Metal Cutting Blade

Resaw Pro Carbide Tipped Blade 19-1106 111" x 3/4” x .035” x 3 TPI

• 111" x 3/4” x .035” x 3 TPI Carbide Tipped
• Triple set tooth pattern reduces vibration
• Improved blade life
• Fast chip removal

Mobility Kit w/Foot Pedal for 10-324*, 10-324TG*, 10-325, 10-326

*13-324 Mobility Kit Baseplate Adapter is required to use 13-326 Mobility Kit with 10-324 and10-324TG bandsaws.

• No seam for reduced saw vibration
• High tear strength
• Temperature resistance prevents cracking
• Greater flex-life than rubber
• Shore 85A hardness for durability
• Lemon Yellow color for easy blade viewing

• 3/8” wide with 1/2" arbor hole.

• 1/2” wide with 5/8" arbor hole.

• Spacer is 5/32” Thick x 1-3/16” Diameter with 5/8” Hole
• Made of machined, hardened steel with black oxide finish
• Use on grinder arbors to center abrasive stones or CBN etc. wheels within the grinder’s guards.

• Kit includes all of the wheel guard parts for both the right and left side of your bench grinder's motor (not included) - wheel guards with dust ports and spark deflectors, eye shield assemblies, tool rest assemblies, mounting hardware and instructions.
• Kit does not include bench grinder motor, flanges, spacers, spindle nuts or grinding wheels.

• 8” Diameter x 5/8” Wide Wire Wheel.
• Brass coated 0.30mm wire.
• For cleaning of metal surfaces.
• For use on grinders with 5/8” arbors.
• Maximum safe speed do not exceed 4000 RPM

• Includes 5 plastic nested fittings for dust hoses 4” to 1-3/8” diameter
• Fittings include sizes: 4" to 4", 4" to 2-3/4", 2-1/2" to 1-7/8", 1-5/8" to 1-9/16" and 1-3/8" to 1-3/8".
• This universal set will fit any other dust collector or shop vac hoses for attaching to machines or special shaped vacuuming tips to suck up dust and debris.

• Install on 1-1/4” x 8TPI lathe spindles for easier removal of faceplates and chucks.
• Nylon Washer 1-3/8” ID x 1-3/4” OD

• Install on 1” x 8TPI lathe spindles for easier removal of faceplates and chucks.
• Nylon Washer 1-3/64” ID x 1-5/8” OD.

• For perfect alignment of a lathe’s headstock to the tailstock for spindle turning.
• This double-ended #2 Morse Taper gauge is made of precision machined hardened steel, 7” long. 

• Install on 1-1/4” x 8TPI lathe spindles for easier removal of faceplates and chucks.
• Nylon Washer 1-3/8” ID x 1-3/4” OD

• Install on 1” x 8TPI lathe spindles for easier removal of faceplates and chucks.
• Nylon Washer 1-3/64” ID x 1-5/8” OD.

• The Z3 Chuck has a direct threaded 1" x 8TPI body for immediate mounting on lathes. Kit includes a 50mm (2") Jaw Set, Wood Screw RH, Chuck Key, T-handle T20 Wrench, 3mm Hex Wrench and Instructions. For use on lathes with a 10" to 14" swing.
• Z3 Chuck is 3-1/2" (88mm) diameter with pre-machined 1" x 8TPI body. At only about 2.6 lbs., this light weight and small chuck diameter is ideal for use on smaller lathes. Extra-fine finish with etched safety icons and serial number for registering under the industry's best 10 year warranty!
• 50mm (2") Jaw Set accessory that is included with the Z3 Chuck is one of the most popular, standard jaw styles for holding bowl or spindle/tenon projects. Over 20 other sizes and shapes of RIKON jaw sets are available for use with the Z3 chuck to hold bowls, platters, pen making blanks or other turnings on your lathe.
• The Wood Screw is held by the chuck to mount small bowl or other light weight projects for turning. Sharp threads cut into wood for best holding power. Requires a pilot hole bored in the wood before installation.
• Made exclusively for RIKON

• The Z4 Chuck has a direct threaded 1-1/4" x 8TPI body for immediate mounting on lathes. Kit includes a 50mm (2") Jaw Set, Wood Screw RH, Chuck Key, T-handle T20 Wrench, 3mm Hex Wrench and Instructions. For use on larger lathes with swings 14" and above.
• The Z4 Chuck is 3-7/8" (98.5mm) diameter with pre-machined 1-1/4" x 8TPI body. At about 3.8 lbs., this robust weight and larger chuck diameter is best for use on larger size lathes that turn heavier wood projects which can damage smaller sized lathes. Chuck has an extra-fine finish with etched safety icons and serial number for registering under the industry's best 10 year warranty!
• 50mm (2") Jaw Set accessory that is included with the Z4 Chuck is one of the most popular, standard jaw styles for holding bowl or spindle/tenon projects. Over 20 other sizes and shapes of RIKON jaw sets are available for use with the Z4 chuck to hold bowls, platters, pen making blanks or other turnings on your lathe.
• The Wood Screw is held by the chuck to mount small bowl or other light weight projects for turning. Sharp threads cut into wood for best holding power. Requires a pilot hole bored in the wood before installation.
• Made exclusively for RIKON

• Improved design of the chuck sliders gives added strength for attaching a variety of available jaw set accessories. Meticulously machined chuck body and internal gearing system operates flawlessly for reliable closing and opening operation with the included special Chuck Key.
• This Z3 Chuck requires your choice of appropriately sized Threaded Insert adapter (sold separately) to be installed into the rear of the chuck to mount the chuck on your lathe.
• Kit includes a 50mm (2") Jaw Set, Wood Screw RH, Chuck Key, T-handle T20 Wrench, 3mm Hex Wrench and Instructions.
• For use on lathes with a 10" to 14" swing.  Z3 Chuck is 3-1/2" (88mm) diameter and with your selected Threaded Insert (sold separately), it weighs at only about 2.9 lbs.. This light weight and small chuck diameter is ideal for use on smaller lathes. Extra-fine finish with etched safety icons and serial number for registering under the industry's best 10 year warranty!
• 50mm (2") Jaw Set accessory that is included with the Z3 Chuck is one of the most popular, standard jaw styles for holding bowl or spindle/tenon projects. Over 20 other sizes and shapes of RIKON jaw sets are available for use with the Z3 chuck to hold bowls, platters, pen making blanks or other turnings on your lathe.
• The Wood Screw is held by the chuck to mount small bowl or other light weight projects for turning. Sharp threads cut into wood for best holding power. Requires a pilot hole bored in the wood before installation.
• The 70-105 Z3 Chuck requires a Threaded Insert adapter before it can be mounted on a lathe. Sold separately, RIKON offers four different insert thread options for the Z3 chuck: 71-120 is threaded for M33x3.5 ISO RH lathe spindles; 71-121 has 1"x8 TPI UNC RH threads; 71-122 has 1-1/4"x8 TPI UNS RH threads; and 71-123 has M30x3.5 RH threads.
• Made exclusively for RIKON

• This Z4 Chuck requires your choice of appropriately sized Threaded Insert adapter (sold separately) to be installed into the rear of the chuck to mount the chuck on your lathe. Kit includes a 50mm (2") Jaw Set, Wood Screw RH, Chuck Key, T-handle T20 Wrench, 3mm Hex Wrench and Instructions. For use on larger lathes with swings 14" and above.
• The Z4 Chuck is 3-7/8" (98.5mm) diameter and with your selected Threaded Insert (sold separately), it weighs only about 4 lbs. This robust weight and larger chuck diameter is best for use on larger size lathes that turn heavier wood projects which can damage smaller sized lathes. Chuck has an extra-fine finish with etched safety icons and serial number for registering under the industry's best 10 year warranty!
• 50mm (2") Jaw Set accessory that is included with the Z4 Chuck is one of the most popular, standard jaw styles for holding bowl or spindle/tenon projects. Over 20 other sizes and shapes of RIKON jaw sets are available for use with the Z4 chuck to hold bowls, platters, pen making blanks or other turnings on your lathe.
• The Wood Screw is held by the chuck to mount small bowl or other light weight projects for turning. Sharp threads cut into wood for best holding power. Requires a pilot hole bored in the wood before installation.
• The 70-106 Z4 Chuck requires a Threaded Insert adapter before it can be mounted on a lathe. Sold separately, RIKON offers four different insert thread options for the Z4 chuck: 71-120 is threaded for M33x3.5 ISO RH lathe spindles; 71-121 has 1"x8 TPI UNC RH threads; 71-122 has 1-1/4"x8 TPI UNS RH threads; and 71-123 has M30x3.5 RH threads.
• Made exclusively for RIKON

• Adjustable all-metal feet with large 3-1/8" (80mm) swivel base pads raise the working heights of lathes and give extra stability on uneven floors.
• Set of 4 includes hardware to install on lathe legs with pre-bored mounting holes 5/8" - 3/4" (16-19mm) diameter
• Raises lathes from 1-7/8" ( 47.5mm) to approximately 2-7/8" ( 73mm) high.
• Feet are secured to the lathe with supplied washers and hex huts.
• M16-2.0 Threaded post is 1-3/4" (45mm) long.
• Each foot includes 2 hex nuts and 2 washers to fasten the foot to the pre-bored lathe foot

• 8-1/4" long x 1-5/16" high J-Curve Tool Rest is great when hollowing inside surfaces of small to medium sized bowls and vessels.
• J-Curve end has a radius of 1-7/8" (48mm).
• Body is cast iron with threaded base M12x1.25 to mount on PRO tool rest posts (available separately).
• 8mm diameter top rod is hardened steel to give smooth movement of tools over the rest when turning.

• C-Curve has a radius of approximately 8" (204mm) 2-3/4” (69mm) x 1-3/16" (30mm) tall.
• Made of hardened steel to give smooth movement of tools over the rest when turning.
• Hub end is threaded M12x1.25 so that it can be mounted on posts from either side, depending on your work support needs
• PRO tool rest posts (available separately).

• 10-1/4" (260mm) long straight section is great for supporting tools when working on the outside of bowls.
• J-Curve end has a radius of 2-5/16" (59mm).
• 8mm diameter top rod is hardened steel to give smooth movement of tools over the rest.
• Cast iron body includes a 1" diameter tool rest post 5-1/8" (130mm) long.

• C-Curve is has a radius of approximately 8" (204mm).
• 8mm diameter top rod is hardened steel to give smooth movement of tools over the rest.
• Cast iron body includes a 1" diameter tool rest post 5-1/8" (130mm) long.

• Raises tool rests 4” higher when working on larger swing capacity lathes.
• Has 1” post and 1” receiving hole for securing your tool rests with its lever handle.
• Made of cast iron

• Increases the reach of tool rests for turning surfaces not possible with standard tool rests.
• Has 1” post and hole with 7-1/2” reach.
• Made of cast iron.

• Set of 3 Bowl Gouges includes 3/8" (10mm), 1/2" (13mm), and 5/8" (16mm) diameter tools.
• Made of M2 High Speed Steel
• Special 14mm diameter shaft ends fit into RIKON's 70-801 16" Handle's collet chuck for use.
• Gouges are factory ground and require final sharpening before use.
• Made of M2 HSS and CRYOGENICALLY treated, noted for resisting high heat and retaining sharp cutting edges.

• Set of 3 Spindle Gouges includes 1/4" (7mm), 3/8" (10mm), and 1/2" (13mm) diameter tools.
• Made of M2 High Speed Steel
• Special 14mm diameter shaft ends fit into RIKON's 70-801 16" Handle's collet chuck for use.
• Gouges are factory ground and require final sharpening before use.
• Made of M2 HSS and CRYOGENICALLY treated, noted for resisting high heat and retaining sharp cutting edges.

Mobility Kit w/Foot Pedal for 10-324*, 10-324TG*, 10-325, 10-326

*13-324 Mobility Kit Baseplate Adapter is required to use 13-326 Mobility Kit with 10-324 and10-324TG bandsaws.

• For Planers Models 25-130H, 25-131H, 25-135H
• For Jointer Models 20-600H, 20-800H

• For Planers Models 25-130H, 25-131H, 25-135H
• For Jointer Models 20-600H, 20-800H

• For Planer Models 25-130H, 25-131H
• For Jointer Models 20-600H, 20-800H

• 15mm x 15mm x2.5mm
• For Planer / Jointer Models
• 23-400H, 25-200H, 25-210H, 25-212H, 25-216H

• 14mm x 14mm X 2mm
• For Jointer Models 20-106H, 20-108H, 23-150H

• Adjustable height legs
• 2 adjustable end brackets
• 2 support arms or holding panels
• Anti-slip work surface quick fold-up design with carry handle for easy portability.

• Platform Dimension 42” x 17” Aluminum, steel and MDF construction
• Three working height 22”/26”/30”
• Rated Load Test 22” height: 1100 26” height 440 30” height 330
• Easily foldable design for storage
• Two 4'' caster for easy transport
• Built in Power Strip
• Two swivel casters in bottom can work as transport cart