Air Filtration
INNER FILTERS
61-905 | Inner Filter Bag (1 micron) for 61-200, 61-750, 62-100 | $79.99 | In Stock | Add to cart |
62-902F | Inner Filter Bag 9-1/2"X16-1/2" X 3/4" Merv 12 for 62-400/450 | $24.99 | In Stock | Add to cart |
OUTER FILTERS
61-910C | Outer Charcoal Filter for 61-200, 61-750, 62-100 | $69.99 | In Stock | Add to cart |
61-912F | Standard 5 Micron Outer Filter 12″ x 24″ x 1″ SEP Pleated Filter for 62-1100, 61-200, 62-100 , 61-750 | $29.99 | In Stock | Add to cart |
62-901F | Outer Filter 9-1/2X16-1/2" X 2" SEP Pleated Filter Merv 8 for 62-400/450 | $24.99 | In Stock | Add to cart |
Bandsaw Blades
64.5 INCH - HORIZONTAL METAL CUTTING
19-6401 | 64-1/2" X 1/2" X 0.025 X 14 TPI Bi-Metal Reg Metal Cutting Blade | $49.99 | In Stock | Add to cart |
19-6402 | 64-1/2" X 1/2" X 0.025 X 18 TPI Bi-Metal Reg Metal Cutting Blade | $49.99 | In Stock | Add to cart |
70.5 INCH - WOODWORKING
19-7002 | 70-1/2" x 3/16" 025 10TPI Reg Blade California Proposition 65 Warning |
$29.99 | In Stock | Add to cart |
19-7003 | 70-1/2" x 1/4" 025 6 TPI Hook Blade California Proposition 65 Warning |
$29.99 | In Stock | Add to cart |
19-7004 | 70-1/2" x 3/8" 025 4 TPI Hook Blade California Proposition 65 Warning |
$29.99 | In Stock | Add to cart |
19-7005 | 70-1/2" x 1/2" 025 3 TPI Hook Blade California Proposition 65 Warning |
$29.99 | In Stock | Add to cart |
19-7006 | 70-1/2 x 1/8 x 018 x 8 TPI Hook Blade California Proposition 65 Warning |
$29.99 | In Stock | Add to cart |
19-7007 | 70-1/2 x 1/8 x 018 x 14 TPI Hook Blade California Proposition 65 Warning |
$29.99 | In Stock | Add to cart |
19-7008 | 70-1/2" x 5/16" Wide 0.016" Gauge 6 TPI Hook Style | $29.99 | In Stock | Add to cart |
70.5 INCH – NON FERROUS METAL
19-7010 | 70-1/2” 1/2” 0.025” 14 TPI Bi-Metal Reg Metal Cutting Blade | $59.99 | Out of Stock | Add to cart |
19-7011 | 19-7011 70-1/2” 1/2” 0.025” 18 TPI Bi-Metal Reg Metal Cutting Blade | $59.99 | Out of Stock | Add to cart |
19-7012 | 19-7012 70-1/2” 1/2” 0.025” 10/14 TPI Bi-Metal Reg Metal Cutting Blade |
$59.99 | In Stock | Add to cart |
19-7013 | 19-7013 70-1/2” 1/2” 0.025” 14/18 TPI Bi-Metal Reg Metal Cutting Blade |
$59.99 | In Stock | Add to cart |
93.5 INCH – WOODWORKING
19-9310 | 93-1/2" x 3/16" 025 10 TPI Reg Blade California Proposition 65 Warning |
$34.99 | In Stock | Add to cart |
19-9311 | 93-1/2" x 3/8" 025 4 TPI Hook Blade California Proposition 65 Warning |
$34.99 | In Stock | Add to cart |
19-9312 | 93-1/2" x 1/2" 025 3 TPI Hook Blade California Proposition 65 Warning |
$34.99 | In Stock | Add to cart |
19-9313 | 93-1/2" x 5/8" 025 3 TPI Hook Blade California Proposition 65 Warning |
$34.99 | In Stock | Add to cart |
99.75 INCH – WOODWORKING
19-9910 | 99-3/4" x 1/4" 025 6 TPI Hook Blade California Proposition 65 Warning |
$39.99 | In Stock | Add to cart |
19-9911 | 99-3/4" x 3/8" 025 4 TPI Hook Blade California Proposition 65 Warning |
$39.99 | In Stock | Add to cart |
19-9912 | 99-3/4" x 1/2" 025 3 TPI Hook Blade California Proposition 65 Warning |
$39.99 | In Stock | Add to cart |
19-9913 | 99-3/4" x 5/8" 025 3 TPI Hook Blade California Proposition 65 Warning |
$39.99 | In Stock | Add to cart |
19-9914 | 99-3/4" x 3/4" 032 3 TPI Hook Blade California Proposition 65 Warning |
$39.99 | Out of Stock | Add to cart |
111 INCH – WOODWORKING
19-1100 | 111" x 1/4" 025 6 TPI Hook Blade California Proposition 65 Warning |
$34.99 | In Stock | Add to cart |
19-1101 | 111" x 3/16" 025 10 TPI Reg Blade California Proposition 65 Warning |
$34.99 | In Stock | Add to cart |
19-1102 | 111" x 3/8" 025 4 TPI Hook Blade California Proposition 65 Warning |
$34.99 | In Stock | Add to cart |
19-1103 | 111" x 1/2" 025 3 TPI Hook Blade California Proposition 65 Warning |
$34.99 | In Stock | Add to cart |
19-1105 | 111" x 5/8" 025 4 TPI Regular Blade California Proposition 65 Warning |
$34.99 | In Stock | Add to cart |
19-1106 | Resaw Pro Carbide Tipped Blade 19-1106 111" x 3/4” x .035” x 3 TPI |
$149.99 | In Stock | Add to cart |
111 INCH - METAL
19-1511 | 111" x 1/2" x .025 x 14 TPI Reg. Bi-Metal Bandsaw Blade California Proposition 65 Warning |
$64.99 | Out of Stock | Add to cart |
19-1512 | 111" x 1/2" x .025 x 18 TPI Reg. Bi-Metal Bandsaw Blade California Proposition 65 Warning |
$64.99 | Out of Stock | Add to cart |
19-1513 | 111" x 3/4" x .035 x 8/12 TPI Vari. Bi-Metal Bandsaw Blade California Proposition 65 Warning |
$69.99 | In Stock | Add to cart |
19-1514 | 111" x 3/4" x .035 x 10/14 TPI Vari. Bi-Metal Bandsaw Blade California Proposition 65 Warning |
$69.99 | In Stock | Add to cart |
124 INCH - WOODWORKING
19-1210 | 124" x 1/4" 025 x 6TPI Hook Blade All-Pro California Proposition 65 Warning |
$34.99 | In Stock | Add to cart |
19-1211 | 124" x 3/8" 025 4TPI Hook Blade All-Pro California Proposition 65 Warning |
$34.99 | In Stock | Add to cart |
19-1212 | 124" x 1/2" x 025 3 TPI Hook Blade All-Pro California Proposition 65 Warning |
$44.99 | In Stock | Add to cart |
19-1213 | 124" x 5/8" 025 3 TPI Hook Blade All-Pro California Proposition 65 Warning |
$44.99 | In Stock | Add to cart |
19-1214 | 124" x 3/4" 032 3 TPI Hook Blade All-Pro California Proposition 65 Warning |
$44.99 | In Stock | Add to cart |
19-1215 | 124" x 1" 035 2 TPI Hook Blade All-Pro California Proposition 65 Warning |
$49.99 | In Stock | Add to cart |
142 INCH - WOODWORKING
19-1410 | 142" x 3/8" 025 4 TPI Hook Blade California Proposition 65 Warning |
$34.99 | In Stock | Add to cart |
19-1411 | 142" x 1/2" 025 3 TPI Hook Blade California Proposition 65 Warning |
$34.99 | Out of Stock | Add to cart |
19-1412 | 142" x 5/8" 025 3 TPI Hook Blade California Proposition 65 Warning |
$34.99 | In Stock | Add to cart |
19-1413 | 142" x 3/4" 032 3 TPI Hook Blade California Proposition 65 Warning |
$34.99 | In Stock | Add to cart |
142 INCH - METAL
19-1520 | 142 x 1/2 x 025 x 14 TPI Bi-Metal Reg Metal Cutting Blade California Proposition 65 Warning |
$69.99 | Out of Stock | Add to cart |
19-1521 | 142 x 1/2 x 025 x 18 TPI Bi-Metal Reg Metal Cutting Blade California Proposition 65 Warning |
$69.99 | In Stock | Add to cart |
19-1522 | 142 x 3/4 x 035 x 8/12TPI Var Metal Cutting Blade Bi-Metal California Proposition 65 Warning |
$74.99 | Out of Stock | Add to cart |
19-1523 | 142 x 3/4 x 035 x 10/14TPI Var Metal Cutting Blade Bi-Metal California Proposition 65 Warning |
$74.99 | In Stock | Add to cart |
153 INCH - WOODWORKING
19-1701 | 153" x 3/8" x .025 x 4TPI Hook Blade California Proposition 65 Warning |
$39.99 | In Stock | Add to cart |
19-1702 | 153" x 1/2" x .025 x 3TPI Hook Blade California Proposition 65 Warning |
$39.99 | In Stock | Add to cart |
19-1703 | 153" x 5/8" x .025 x 3TPI Hook Blade California Proposition 65 Warning |
$39.99 | In Stock | Add to cart |
19-1704 | 153" x 3/4" x .032 x 3TPI Hook Blade California Proposition 65 Warning |
$44.99 | Out of Stock | Add to cart |
19-1705 | 153" x 1" x .035 x 2TPI Hook Blade California Proposition 65 Warning |
$49.99 | Out of Stock | Add to cart |
162 INCH - WOODWORKING
19-1801 | 162" x 3/8" x .025 x 4TPI Hook Blade California Proposition 65 Warning |
$44.99 | Out of Stock | Add to cart |
19-1802 | 162" x 1/2" x .025 x 3TPI Hook Blade California Proposition 65 Warning |
$44.99 | Out of Stock | Add to cart |
19-1803 | 162" x 5/8" x .025 x 3TPI Hook Blade California Proposition 65 Warning |
$49.99 | In Stock | Add to cart |
19-1804 | 162" x 3/4" x .032 x 3TPI Hook Blade
California Proposition 65 Warning |
$49.99 | In Stock | Add to cart |
19-1805 | 162" x 1" x .035 x 2TPI Hook Blade .. California Proposition 65 Warning |
$54.99 | In Stock | Add to cart |
163 INCH – WOODWORKING
19-1601 | 163 x 3/8 x 025 x 4TPI Hook Wood Cutting Blade California Proposition 65 Warning |
$84.99 | In Stock | Add to cart |
19-1602 | 163 x 5/8 x 025 x 3TPI Hook Wood Cutting Blade California Proposition 65 Warning |
$54.99 | In Stock | Add to cart |
19-1603 | 163 x 3/4 x 032 x 3TPI Hook Wood Cutting Blade California Proposition 65 Warning |
$54.99 | In Stock | Add to cart |
19-1604 | 163 x 1 x 035 x 2TPI Hook Wood Cutting Blade California Proposition 65 Warning |
$64.99 | Out of Stock | Add to cart |
176 INCH - WOODWORKING
19-1901 | 176" x 3/8" x .025 x 4TPI Hook Bandsaw Blade California Proposition 65 Warning |
$54.99 | In Stock | Add to cart |
19-1902 | 176" x 1/2" x .025 x 3TPI Hook Bandsaw Blade California Proposition 65 Warning |
$54.99 | Out of Stock | Add to cart |
19-1903 | 176" x 5/8" x .025 x 3TPI Hook Bandsaw Blade California Proposition 65 Warning |
$64.99 | In Stock | Add to cart |
19-1904 | 176" x 3/4" x .032 x 3TPI Hook Bandsaw Blade California Proposition 65 Warning |
$64.99 | Out of Stock | Add to cart |
19-1905 | 176" x 1" x .035 x 2TPI Hook Bandsaw Blade California Proposition 65 Warning |
$69.99 | In Stock | Add to cart |
19-1906 | 176" x 1-1/4" x .035 x 1.3TPI Hook Bandsaw Blade California Proposition 65 Warning |
$74.99 | In Stock | Add to cart |
Bandsaw Accessories
BANDSAW TOOL-LESS GUIDE KIT
10-900 | Spring Loaded Tool-Less Blade Guide Retrofit Kit System fits 10-324/10-325 |
$99.99 | In Stock | Add to cart |
BANDSAW FENCES
10-920 | Quick-Adjust 6” Tall Rip Fence System for use with most RIKON Bandsaws | $269.99 | In Stock | Add to cart |
10-921 | 6” Tall Rip Fence Extrusion and Re-Saw Bar Set for 10-325 | $149.99 | In Stock | Add to cart |
10-924 | Flip Stop for 6” tall, extruded aluminum fences on RIKON’s 14”, 18” and 24” Bandsaws and 10-920, 10-921 Fence Systems | $24.99 | In Stock | Add to cart |
10-926 | Deluxe Rip Fence System for 10-305 | $49.99 | In Stock | Add to cart |
BANDSAW ACCESSORIES
10-900 | Spring Loaded Tool-Less Blade Guide Retrofit Kit System fits 10-324/10-325 |
$99.99 | In Stock | Add to cart |
12-202 | LED Gooseneck Worklight with Magnetic Base and Magnetic Clip | $69.99 | In Stock | Add to cart |
13-321 | Mobility Kit for 10-321 | $99.99 | In Stock | Add to cart |
13-324 | Mobility Kit Baseplate Adapter for 10-324 and 10-324TG* *13-324 Mobility Kit Baseplate Adapter is required to use 13-326 Mobility Kit with 10-324 and10-324TG bandsaws. | $39.99 | In Stock | Add to cart |
13-326 | Mobility Kit w/Foot Pedal for 10-324*, 10-324TG*, 10-325, 10-326 *13-324 Mobility Kit Baseplate Adapter is required to use 13-326 Mobility Kit with 10-324 and10-324TG bandsaws. |
$149.99 | In Stock | Add to cart |
13-345 | Mobility Kit for 10-341, 342, 345, 346, 347, 350, 351, 353, 370 | $149.99 | In Stock | Add to cart |
13-912 | Miter Gauge for 3/4" x 3/8" (T- slot Tables Only) | $59.99 | In Stock | Add to cart |
13-913 | Stand for 10” Bandsaws, 10-305, 10-306, 10-3061 | Original price was: $109.99.$88.00Current price is: $88.00. | In Stock | Add to cart |
13-920 | Miter Gauge for 10-305 & 10-306 | $34.99 | In Stock | Add to cart |
99-201 | Inclinometer with Laser | $39.99 | In Stock | Add to cart |
99-202 | Height Gauge & Caliper | $29.99 | In Stock | Add to cart |
C10-393 | Table Inserts for 10-305, 10-306 and 10-3061 PK 4 | $14.99 | In Stock | Add to cart |
BANDSAW DRIVE BELTS
C10-987 | Drive Belt for 10-385 | $24.99 | In Stock | Add to cart |
C10-988 | Multi-vee belt (Same as P10-342-10F) - Mfg# 1-5PJ1023GB16588 | $24.99 | In Stock | Add to cart |
C10-989 | Multi-V Belt for 10-353 | $17.99 | In Stock | Add to cart |
C10-990 | Drive Belt for 10-306 & 10-3061 | $14.99 | In Stock | Add to cart |
C10-991 | Drive Belt for 10-300, 10-305 | $14.99 | In Stock | Add to cart |
C10-992 | Drive Belt for 10-340, 10-345 | $24.99 | In Stock | Add to cart |
C10-993 | Drive Belt for 10-350, 10-350BAL, 10-351 | $27.99 | In Stock | Add to cart |
C10-994 | Drive Belt for 10-370 | $27.99 | In Stock | Add to cart |
C10-995 | Drive Belt for RK14CS, 10-320, 10-321, 10-324, 10-325, 10-326 | $19.99 | In Stock | Add to cart |
C10-996 | Drive Belt for 10-380 | $26.99 | In Stock | Add to cart |
C10-998 | Drive Belt for 10-308 | $14.99 | In Stock | Add to cart |
C10-999 | Drive Belt for 10-346, 10-347 | $24.99 | In Stock | Add to cart |
BANDSAW FENCES
10-920 | Quick-Adjust 6” Tall Rip Fence System for use with most RIKON Bandsaws | $269.99 | In Stock | Add to cart |
10-921 | 6” Tall Rip Fence Extrusion and Re-Saw Bar Set for 10-325 | $149.99 | In Stock | Add to cart |
10-924 | Flip Stop for 6” tall, extruded aluminum fences on RIKON’s 14”, 18” and 24” Bandsaws and 10-920, 10-921 Fence Systems | $24.99 | In Stock | Add to cart |
10-926 | Deluxe Rip Fence System for 10-305 | $49.99 | In Stock | Add to cart |
BANDSAW GUIDE BEARINGS
C10-108 | Guide Bearings for 10-300, 10-305, 10-308 (6 Pack) California Proposition 65 Warning |
$22.99 | Out of Stock | Add to cart |
C10-109 | Guide Bearings for 10-306, 10-3061 ,10-315, 10-320, 10-321, 10-324, 10-324TG, 10-325 (6 Pack)California Proposition 65 Warning | $24.99 | In Stock | Add to cart |
C10-144 | Guide Bearings for 10-340, 10-341, 10-345, 10-370, 10-380 (10 Pack) California Proposition 65 Warning |
$44.99 | In Stock | Add to cart |
C10-145 | Guide Bearings for 10-900 Bandsaw Retrofit Kit (6 Pack) California Proposition 65 Warning |
$29.99 | In Stock | Add to cart |
C10-209 | Guide Bearings for 10-350, 350BAL, 10-351 (10 Pack) California Proposition 65 Warning |
$44.99 | In Stock | Add to cart |
C10-326 | Guide Bearings 10 Pack for 10-326/10-353/10-342/10-347 | $46.99 | In Stock | Add to cart |
BANDSAW GUIDE KITS
10-900 | Spring Loaded Tool-Less Blade Guide Retrofit Kit System fits 10-324/10-325 |
$99.99 | In Stock | Add to cart |
BANDSAW MITER GAUGES
13-912 | Miter Gauge for 3/4" x 3/8" (T- slot Tables Only) | $59.99 | In Stock | Add to cart |
13-920 | Miter Gauge for 10-305 & 10-306 | $34.99 | In Stock | Add to cart |
BANDSAW TABLE INSERTS
C10-372 | Table Insert for 10-300 10" Bandsaw | $9.99 | In Stock | Add to cart |
C10-391 | Table Inserts (4 Pack) All Rikon 14" & 18" except 10-346 | $19.99 | In Stock | Add to cart |
C10-392 | Zero Clearance Table Inserts (4 Pack) Fits all RIKON 14” & 18” Bandsaws except 10-346/10-347 | $19.99 | Out of Stock | Add to cart |
C10-393 | Table Inserts for 10-305, 10-306 and 10-3061 PK 4 | $14.99 | In Stock | Add to cart |
C10-394 | C10-394: Zero Clearance Table Inserts for 10-305, 10-306 & 10-3061 (Pack 4) | $14.99 | Out of Stock | Add to cart |
C10-395 | Table Insert aluminum. All Rikon 14"& 18" Bandsaws except 10-346 | $14.99 | In Stock | Add to cart |
C10-396 | Table Insert for 10-346, 10-347, & 10-385 (Square) | $12.99 | In Stock | Add to cart |
BANDSAW TIRES
C10-405U | 10” Urethane Wheel Tire (Lemon Yellow) |
$19.99 | In Stock | Add to cart |
C10-415 | 12" Rubber Wheel Tire for 10-315 | $14.99 | Out of Stock | Add to cart |
C10-421 | 14" Rubber Wheel Tire for 10-320, 10-321, RK14CS | $22.99 | In Stock | Add to cart |
C10-425U | 14" Yellow Urethane Tires | $22.99 | In Stock | Add to cart |
C10-445 | 18" Rubber Wheel Tire for 10-340, 10-345, 10-370 | $24.99 | In Stock | Add to cart |
C10-446 | 18" Rubber Wheel Tire for 10-341, 10-342, 10-346, 10-347 | $24.99 | In Stock | Add to cart |
C10-480 | 22" Rubber Wheel Tire for 10-380 | $44.99 | In Stock | Add to cart |
No accessories found
Bench Grinders/Buffer/Sharpeners
BUFFING WHEELS
P81-600-3 | 6" Spiral Sewn Replacement Buffing Wheel | $24.99 | In Stock | Add to cart |
P81-608-3 | 8" Spiral Sewn Replacement Buffing Wheel | $24.99 | In Stock | Add to cart |
CBN GRINDING WHEELS
1-1/2" CBN Wheels | RIKON's PROseries 8" sharpening wheels features CBN (Cubic Boron Nitride) abrasives, one of the hardest materials besides diamond! Mounted on your grinder, these wheels will put razor sharp edges on your hardened steel tools - woodturning and carving gouges, chisels, plane blades and other cutting instruments. Each sharpening wheel is precision machined from solid aluminum, balanced, and bonded with fine CBN abrasives that are ideal for sharpening hardened heat-treated steel tools. CBN wheels cut quickly with minimum pressure, stay cool and never needs dressing or shaping. Wheels fit onto grinders with 5/8" shafts and work best on low-speed grinders operating below 2,000 RPMs. The 1-1/2” wide surface with 1/4” curved radius edges is available in 80, 180, 350 or 600 grit to offer woodworkers the full range of sharpening from the initial grinding/shaping stage to creating final razor-sharp edges on tools. Note that CBN wheels are not for use with soft carbon steel, aluminum or other soft metals which will ruin the abrasives and void the warranty. Stones are packed in cardboard boxes for safe storage and transporting. • 82-5080R RIKON PROseries 8" x 1.5" w/Radius 80 Grit CBN Sharpening Wheel, 5/8" arbor hole • 82-5180R RIKON PROseries 8" x 1.5" w/Radius 180 Grit CBN Sharpening Wheel, 5/8" arbor hole • 82-5350R RIKON PROseries 8" x 1.5" w/Radius 350 Grit CBN Sharpening Wheel, 5/8" arbor hole • 82-5600R RIKON PROseries 8" x 1.5" w/Radius 600 Grit CBN Sharpening Wheel, 5/8" arbor hole | $159.99 | In Stock | Add to cart |
1" CBN Wheels | RIKON's PROseries 8" sharpening wheels features CBN (Cubic Boron Nitride) abrasives, one of the hardest materials besides diamond! Mounted on your grinder, these wheels will put razor sharp edges on your hardened steel tools - woodturning and carving gouges, chisels, plane blades and other cutting instruments. Each sharpening wheel is precision machined from solid aluminum, balanced, and bonded with fine CBN abrasives that are ideal for sharpening hardened heat-treated steel tools. CBN wheels cut quickly with minimum pressure, stay cool and never needs dressing or shaping. Wheels fit onto grinders with 5/8" shafts and work best on low-speed grinders operating below 2,000 RPMs. These PROseries CBN wheels feature an 8” diameter with a 1" wide perimeter surface with 1/4" side edges. Each wheel style is available in 80, 180, 350 or 600 grit to offer woodworkers the full range of sharpening from the initial grinding/shaping stage to creating final razor-sharp edges on tools. Note that CBN wheels are not for use with soft carbon steel, aluminum or other soft metals which will ruin the abrasives and void the warranty. Stones are packed in cardboard boxes for safe storage and transporting. • 82-1080 RIKON PROseries 8" x 1" 80 Grit CBN Sharpening Wheel, 5/8" arbor hole • 82-1180 RIKON PROseries 8" x 1" 180 Grit CBN Sharpening Wheel, 5/8" arbor hole • 82-1350 RIKON PROseries 8" x 1" 350 Grit CBN Sharpening Wheel, 5/8" arbor hole • 82-1600 RIKON PROseries 8" x 1" 600 Grit CBN Sharpening Wheel, 5/8" arbor hole | $139.99 | Out of Stock | Add to cart |
CBN Bench Stones | RIKON's PROseries double-sided sharpening stones features CBN (Cubic Boron Nitride) abrasives, one of the hardest materials besides diamond! No water is required to put razor sharp edges on your hardened steel tools - knives, chisels, gouges, and other cutting blades. 3 different double-sided CBN stones are available to take you through the full edge sharpening process - 150/250 grits, 300/600 grits and 400/800 grits. A perfect pairing of grits to shape and put sharpened edges on tools. CBN stones measure 7-7/8" x 3" x 3/8" (200mm x 75mm x 10mm) with grit sizes etched on the side of the steel stone for easy identification. CBN abrasives are for sharpening hardened heat[1]treated steel only. Using soft carbon steel, aluminum or other soft metals will ruin the abrasives and void the warranty. Stones are packed in cardboard boxes for safe storage and transporting. 82-1525 RIKON PROseries CBN Bench Stone 8" x 3" 150/250 Grit Double Sided 82-3060 RIKON PROseries CBN Bench Stone 8" x 3" 300/600 Grit Double Sided 82-4080 RIKON PROseries CBN Bench Stone 8" x 3" 400/800 Grit Double Sided | $119.99 | In Stock | Add to cart |
CBN Credit Card Sharpeners | RIKON's PROseries double-sided credit-card size sharpening stone features CBN (Cubic Boron Nitride) abrasives, one of the hardest materials besides diamond! No water is required to put razor sharp edges on your hardened steel tools - knives, chisels, gouges, and other cutting blades. 82-1122 RIKON PROseries CBN double-sided credit-card 120/220 Grit 82-3560 RIKON PROseries CBN double-sided credit-card 350/600 Grit | $20.00 – $24.99 | Out of Stock | Add to cart |
GRINDING WHEELS
P80-800VS-70 | 8" Grinding Wheel 60 Grit, 5/8" Hub | $16.99 | In Stock | Add to cart |
P80-805-49 | 60 Grit Replacement Wheel | $16.99 | In Stock | Add to cart |
P80-805-5 | 120 Grit Replacement Wheel | $16.99 | Out of Stock | Add to cart |
P80-808-5 | Grinding Wheel 60 Grit 8” x 1” x 5/8” | $16.99 | Out of Stock | Add to cart |
P80-808-60 | Grinding Wheel 120 Grit 8” x 1” x 5/8 | $16.99 | In Stock | Add to cart |
P82-100-21 | Polishing wheel M200x30xM12.5mm | $34.99 | Out of Stock | Add to cart |
P82-100-9 | Grinding wheel M200×40×M12mm | $29.99 | Out of Stock | Add to cart |
MISC GRINDING/BUFFING/SHARPENING ACCESSORIES
80-899 | Wheel Flange for Low Speed Grinder for 80-805 | $3.99 | In Stock | Add to cart |
80-901 | 2.5x Magnifying Eye Shield Lens Kit for 80-805 | $9.99 | In Stock | Add to cart |
80-902 | Left Hand FLAT Tool Rest for 80-805, 80-808 | $9.99 | Out of Stock | Add to cart |
80-903 | Spherical Washer Set of 3 for Grinders | $9.99 | In Stock | Add to cart |
80-910 | Bench Grinder Stand | $159.99 | In Stock | Add to cart |
82-901 | Turning Gouge Jig for 82-100, 82-210 | $39.99 | In Stock | Add to cart |
82-902 | Carving Tool Jig for 82-100, 82,210 | $29.99 | In Stock | Add to cart |
P80-800VS-84 | Bulb California Proposition 65 Warning |
$3.22 | In Stock | Add to cart |
P80-805-54 | Diamond Wheel Dresser | $5.79 | In Stock | Add to cart |
P80-808-40 | Bulb California Proposition 65 Warning |
$5.10 | In Stock | Add to cart |
P82-100-18 | Knob M6x10 California Proposition 65 Warning |
$0.53 | Out of Stock | Add to cart |
PRO SHARPENING SYSTEM
82-1005 | 82-1005: PRO SHARPENING SYSTEM Sharpen your woodturning tools like a PRO! Used with your 6” or 8” bench grinder, this System includes the basic set-up for putting perfect, sharp edges on gouges, chisels, scrapers and other blades. The 2 adjustable armsallow for easy setting of different grinding angles for your shop tools. Set includes: Locking Base Assemblies (2), Long V-Arm, Short 90 degree Platform Arm, Tool Rest Platform for Short Arm, Adjustable Lever Handle and Mounting Hardware. *80-808 8" GRINDER SOLD SEPARATELY | $149.99 | In Stock | Add to cart |
82-1006 | Skew Grinding Jig for 82-1005 Pro Sharpening System | $54.99 | In Stock | Add to cart |
82-1007 | Fingernail Gouge Grinding Attachment for 82-1005 | $59.99 | In Stock | Add to cart |
82-1008 | Angle Gauge for 82-1005 | $49.99 | In Stock | Add to cart |
WIRE WHEELS
P80-800VS-37 | 8" Wire Wheel, 5/8" Hub
|
$16.99 | In Stock | Add to cart |
Cordless Tool
CORDLESS TOOLS ACC
31-123 | 12V 2.0 Ah Lithium Ion Battery | Original price was: $29.99.$24.00Current price is: $24.00. | In Stock | Add to cart |
31-124 | 12V Charger | Original price was: $29.99.$24.00Current price is: $24.00. | In Stock | Add to cart |
31-206 | 4” Sponge Pad (EA) | Original price was: $3.99.$3.20Current price is: $3.20. | In Stock | Add to cart |
31-207 | 2” (51mm) Hook & Loop Pad (EA) w/10mm Thread | Original price was: $7.99.$6.40Current price is: $6.40. | In Stock | Add to cart |
31-208 | 4” (100mm) Hook & Loop Pad (EA) w/10mm Thread | Original price was: $5.99.$4.80Current price is: $4.80. | In Stock | Add to cart |
31-209 | 2” Wool Pad (PK5) | Original price was: $10.99.$8.80Current price is: $8.80. | In Stock | Add to cart |
31-210 | 4” Wool Pad (PK5) | Original price was: $14.99.$12.00Current price is: $12.00. | In Stock | Add to cart |
31-211 | 2” Towel Pad (PK5) | $10.99 | In Stock | Add to cart |
31-212 | 4” Towel Pad (PK5) | $14.99 | In Stock | Add to cart |
31-213 | 2” Sponge Pad (PK3) | $11.99 | In Stock | Add to cart |
Drill Press/Mortiser
DRILL PRESS & MORTISER
12-202 | LED Gooseneck Worklight with Magnetic Base and Magnetic Clip | $69.99 | In Stock | Add to cart |
29-202 | Morticing Attachment w/Chisels fits RIKON 13", 17", 20", 34" Drill Presses | $149.99 | In Stock | Add to cart |
29-912 | 1/2" Mortice Chisel/Bit | $19.99 | In Stock | Add to cart |
29-913 | 3/8"Mortice Chisel/Bit | $19.99 | In Stock | Add to cart |
29-914L | 1/4"Mortice Chisel/Bit (Longer) | $19.99 | In Stock | Add to cart |
29-915L | 5/16"Mortice Chisel/Bit (Longer) | $19.99 | In Stock | Add to cart |
Dust Collection
CANNISTER FILTERS
60-900 | Filter Canister/Cartridge for 1HP Dust Collector | $329.99 | In Stock | Add to cart |
60-905 | Filter Canister/Cartridge for 1.5HP, 2HP Dust Collectors | $329.99 | In Stock | Add to cart |
60-914 | Replacement Canister Filter Cartridge for 60-1750 Cyclone Dust Collector | $119.99 | In Stock | Add to cart |
60-915 | 60-915: Replacement Canister Filter Cartridge for 60-2500 Cyclone Dust Collector | $139.99 | In Stock | Add to cart |
63-915 | Filter Cartridge for 63-100, 63-110 | $24.99 | In Stock | Add to cart |
CLOTH AND PAPER FILTER BAGS
60-903 | Dust Filter Cloth Bag (2 Micron) for 60-105 Portable Dust Collector | $21.99 | In Stock | Add to cart |
60-918 | Cloth Filter (5 micron) and Plastic Dust Bag Set for 1HP Collectors (2 Pack) | $34.99 | In Stock | Add to cart |
60-928 | Cloth Filter (5 micron) and Plastic Dust Bag Set for 1.5, 2HP Collectors (2 Pack) | $44.99 | In Stock | Add to cart |
63-920 | Paper Filter Bags for 63-100, 63-110 (5 Pack) | $24.99 | In Stock | Add to cart |
MISC. DUST COLLECTION
P60-200-22 | Impeller - Sturdy Metal Design with 7 Rear Facing Blades (Dia. 11-3/4”, Shaft Dia. 20mm, Height 3-1/4”, Shaft Hub Length 1-1/4”) California Proposition 65 Warning |
$119.99 | In Stock | Add to cart |
PLASTIC FILTER BAGS
60-901 | Plastic Dust Bag for 60-100 1HP Dust Collector 5 pack | $29.99 | In Stock | Add to cart |
60-902 | Plastic Dust Bag for 60-150, 60-200 1.5, 2HP Dust Collectors (5 Pack) | $34.99 | In Stock | Add to cart |
60-904 | Plastic Dust Bags for 60-101 1HP Dust Collector 5-Pack | $21.99 | In Stock | Add to cart |
60-910 | Plastic Dust Bucket Bags for RIKON 60-1750 Cyclone Dust Collector 5 Pack | $24.99 | In Stock | Add to cart |
60-911 | Filter Element Plastic Bags for 60-1750 1.75HP Cyclone Dust Collector 5-Pack | $24.99 | In Stock | Add to cart |
60-912 | Filter Element Plastic Bags for 60-2500 2HP Cyclone Dust Collector 5-Pack | $24.99 | In Stock | Add to cart |
60-913 | Plastic Dust Bucket Bags for RIKON 60-2500 Cyclone Dust Collector 5-Pack | $24.99 | In Stock | Add to cart |
Lathe
BED EXTENSIONS AND GAP INSERTS
70-900B | 24" Bed Extension for 70-100 (Blue) | $169.99 | In Stock | Add to cart |
70-901 | Bed Extension 24" for 70-1420VSR / 70-220VSR | $279.99 | In Stock | Add to cart |
70-902 | Bed Extension 24” for 70-1218VS | $139.99 | In Stock | Add to cart |
70-903 | Bed Extension 13-1/2" for 70-100/70-150VSR/70-1420VSR/70-1516VSR/70-220VSR | $69.99 | In Stock | Add to cart |
70-904 | Bed Extension 24" for 70-150VSR / 70-1516VSR | $199.99 | In Stock | Add to cart |
70-906 | Bed Extension 21.5” for 70-105 | $99.99 | In Stock | Add to cart |
70-907 | Lathe Bed Gap Insert for 70-3040 | $199.99 | In Stock | Add to cart |
70-908 | Bed Extension 16" for 70-1824VSR & 70-1824VSR2 | $199.99 | In Stock | Add to cart |
70-9083 | Bed Extension Set of 3 for 70-1824VSR/2 Lathe - Includes 70-908, 70-959 & 70-960 70-908 16” BED EXTENSION For 70-1824 70-959 TOOL REST HEIGHT EXTENSION – Raises tool rests 4″ higher when working on larger swing capacity lathes. Has 1″ post and 1″ receiving hole for securing your tool rests with its lever handle. 70-960 Tool Rest Extension – Increases the reach of tool rests for turning surfaces not possible with standard tool rests. Has 1″ post and hole, with 7-1/2″ reach. *Lifestyle shot Banjo and Tools Rest not included | $269.99 | In Stock | Add to cart |
CENTERS AND CENTER POINTS
70-940 | Badger Spur Center | $69.99 | In Stock | Add to cart |
70-942 | 60° Live Center, MT2 | $29.99 | In Stock | Add to cart |
70-943 | Spur Center MT2(Black) (Same as P70-100-2) | $14.99 | In Stock | Add to cart |
70-945 | Live Center MT2 (Black) (Same as P70-100-55) | $19.99 | In Stock | Add to cart |
70-948 | Center Point(Black) (Same as P70-100-1) | $5.99 | In Stock | Add to cart |
DRIVE BELTS
70-984 | Drive Belt for 70-1824VSR | $18.99 | In Stock | Add to cart |
70-985 | Drive Belt for 70-1420VSR | $18.99 | In Stock | Add to cart |
70-986 | Drive Belt (280J5) for 70-150VSR, 70-1516VSR | $17.99 | In Stock | Add to cart |
70-987 | Multi V-Belt for 70-3040 | $19.99 | In Stock | Add to cart |
70-988 | Drive Belt for 70-105 (645mm) | $11.99 | In Stock | Add to cart |
70-989 | Drive Belt for 70-1218VS | $19.99 | In Stock | Add to cart |
70-994 | Drive Belt for 70-300, 70-305 | $19.99 | In Stock | Add to cart |
70-995 | Drive Belt for 70-100 | $17.99 | In Stock | Add to cart |
70-996 | Drive Belt for 70-050, 70-050VS | $21.99 | In Stock | Add to cart |
70-997 | Drive Belt for 70-220VSR | $19.99 | In Stock | Add to cart |
70-998 | Drive Belt for 70-500 | $31.99 | In Stock | Add to cart |
70-999 | Drive Belt for 70-425, 70-450 | $24.99 | Out of Stock | Add to cart |
FACE PLATES
70-933 | 3" Face Plate 1 x 8 TPI (Same as P70-100-3) | $16.99 | In Stock | Add to cart |
70-934 | 3-3/16” Face Plate 1-1/4” x 8 TPI | $19.99 | In Stock | Add to cart |
70-936 | 6" Face Plate 1 x 8 TPI | $25.99 | In Stock | Add to cart |
70-937 | 6" Face Plate 1 1/4" x 8 TPI | $39.99 | In Stock | Add to cart |
70-990 | Nylon Washer 1-3/8 x 1-3/4
|
$5.99 | In Stock | Add to cart |
70-992 | Nylon Washer 1-3/64 x 1-5/8
|
$1.99 | In Stock | Add to cart |
MISCELLANEOUS LATHE ACCESSORIES
12-202 | LED Gooseneck Worklight with Magnetic Base and Magnetic Clip | $69.99 | In Stock | Add to cart |
30-991 | 5/8" Drill Chuck and Arbor with MT2 Taper | $49.99 | In Stock | Add to cart |
70-941 | Double End MT2-MT2 Taper Gauge
|
$24.99 | In Stock | Add to cart |
70-971 | Mobility Caster Set for 70-3040 and 70-1824VSR | $269.99 | Out of Stock | Add to cart |
70-990 | Nylon Washer 1-3/8 x 1-3/4
|
$5.99 | In Stock | Add to cart |
70-992 | Nylon Washer 1-3/64 x 1-5/8
|
$1.99 | In Stock | Add to cart |
LATHE CHUCKS/JAWS/And ACCESSORIES
71-103 | RIKON's Z3 4-Jaw Chuck Kit 71-103 is the perfect wood lathe accessory for turning bowls, platters, spindles and decorative pieces. This 4-Jaw, self-centering chuck is CNC precision-made from high tensile steel with a geared jaw system for easy operation and excellent project holding power. Improved design of the chuck sliders gives added strength for attaching a variety of available jaw set accessories. Meticulously machined chuck body and internal gearing system operates flawlessly for reliable closing and opening operation with the included special Chuck Key.
|
$139.99 | In Stock | Add to cart |
71-104 | RIKON's Z4 4-Jaw Chuck Kit 71-104 is the perfect wood lathe accessory for turning bowls, platters, spindles and decorative pieces. This larger, heavy-duty 4-Jaw, self-centering chuck is CNC precision-made from high tensile steel with a geared jaw system for easy operation and excellent project holding power. Improved design of the chuck sliders gives added strength for attaching a variety of available jaw set accessories. Meticulously machined chuck body and internal gearing system operates flawlessly for reliable closing and opening operation with the included special Chuck Key.
|
$179.99 | In Stock | Add to cart |
71-105 | RIKON's Z3 4-Jaw Chuck Kit 71-105 is the perfect wood lathe accessory for turning bowls, platters, spindles and decorative pieces. This 4-Jaw, self-centering chuck is CNC precision-made from high tensile steel with a geared jaw system for easy operation and excellent project holding power.
|
$119.99 | In Stock | Add to cart |
71-106 | RIKON's Z4 4-Jaw Chuck Kit 71-106 is the perfect wood lathe accessory for turning bowls, platters, spindles and decorative pieces. This larger, heavy-duty 4-Jaw, self-centering chuck is CNC precision-made from high tensile steel with a geared jaw system for easy operation and excellent project holding power. Improved design of the chuck sliders gives added strength for attaching a variety of available jaw set accessories. Meticulously machined chuck body and internal gearing system operates flawlessly for reliable closing and opening operation with the included special Chuck Key.
|
$159.99 | In Stock | Add to cart |
71-120 | Chuck Insert M33 x 3.5 ISO RH | $24.99 | In Stock | Add to cart |
71-121 | Chuck Insert 1" x 8 TPI UNC RH | $24.99 | In Stock | Add to cart |
71-122 | Chuck Insert 1-1/4" x 8 TPI UNS RH | $24.99 | In Stock | Add to cart |
71-123 | Chuck Insert M30 x 3.5RH | $24.99 | In Stock | Add to cart |
71-124 | Chuck Insert 5/8" Plain Bore | $24.99 | Out of Stock | Add to cart |
71-125 | Chuck Insert 3/4" x 16 TPI RH | $24.99 | Out of Stock | Add to cart |
71-200 | 20mm (0.78") Mini Jaws | $39.99 | In Stock | Add to cart |
71-201 | 25mm (1") Mini Jaws | $59.99 | In Stock | Add to cart |
71-202 | 28mm (1.1") Mini Step Jaws | $49.99 | In Stock | Add to cart |
71-203 | 35mm (1.22") Spigot Jaws | $59.99 | In Stock | Add to cart |
71-204 | 50mm (2") Standard Jaws | $59.99 | In Stock | Add to cart |
71-205 | 53mm (2.08") Step Jaws | $74.99 | In Stock | Add to cart |
71-206 | 70mm (2.75") Standard Jaws | $49.99 | In Stock | Add to cart |
71-207 | 75mm (3") Power Grip Jaws | $89.99 | In Stock | Add to cart |
71-208 | 45mm (1.8") Spigot Jaws | $79.99 | In Stock | Add to cart |
71-209 | 130mm (5") Dovetail Jaws | $74.99 | In Stock | Add to cart |
71-210 | 35mm (1.4") Standard Jaws | $49.99 | In Stock | Add to cart |
71-211 | 75mm (3") Heavy Bowl and Gripper Jaws | $74.99 | In Stock | Add to cart |
71-212 | 75mm (3") Long Nose Jaws | $74.99 | In Stock | Add to cart |
71-213 | 17mm (0.7") Pin Jaws with 9mm Bore | $59.99 | In Stock | Add to cart |
71-214 | 100mm (4") Dovetail and Deep Gripper Jaws | $64.99 | In Stock | Add to cart |
71-215 | 31mm (1.22") Mini Spigot Jaws with 13mm Bore | $49.99 | In Stock | Add to cart |
71-216 | Pen Jaws | $44.99 | In Stock | Add to cart |
71-217 | Plastic Soft Jaws | $24.99 | In Stock | Add to cart |
71-218 | 254mm (10") Cole Jaws | $69.99 | In Stock | Add to cart |
71-219 | 203mm (8") Mini Cole Jaws | $74.99 | In Stock | Add to cart |
71-220 | 305mm (12") Large Cole Jaws | $99.99 | In Stock | Add to cart |
71-300 | 50mm (2") Faceplate Ring fits 50mm Jaws | $39.99 | In Stock | Add to cart |
71-301 | 100mm (4") Faceplate Ring fits 100mm Jaws | $54.99 | In Stock | Add to cart |
71-302 | 130mm (5") Faceplate Ring fits 130mm Jaws | $79.99 | In Stock | Add to cart |
71-303 | Z3 Chuck 1"x 8 TPI Direct Thread | $109.99 | In Stock | Add to cart |
71-304 | Z3 Chuck Insert Type | $109.99 | In Stock | Add to cart |
71-305 | Z3 Chuck Key | $14.99 | In Stock | Add to cart |
71-315 | Star Screw T20 M6x10 pack of 8 | $7.99 | In Stock | Add to cart |
71-316 | Standard Wood Screw RH | $24.99 | In Stock | Add to cart |
71-317 | Standard Wood Screw LH | $24.99 | In Stock | Add to cart |
71-320 | Z4 Chuck 1-1/4"x 8 TPI Direct Thread | $119.99 | In Stock | Add to cart |
71-321 | Z4 Chuck Insert Type | $119.99 | In Stock | Add to cart |
71-324 | Z4 Chuck Key | $14.99 | In Stock | Add to cart |
71-325 | Rubber Stopper Fastening Kit for Cole Jaws - 8PC | $9.99 | In Stock | Add to cart |
71-330 | Z3 Chuck Key with Sliding Handle | $14.99 | In Stock | Add to cart |
LATHE STANDS AND EXTENSIONS
70-913 | Lathe Stand Extension for 70-910, 70-920 | $129.99 | In Stock | Add to cart |
70-920 | Universal Stand for Mini and MIDI Lathes | $199.99 | In Stock | Add to cart |
70-972 | Adjustable Feet for 70-3040 and 70-1824VSR,VSR2
|
$79.99 | In Stock | Add to cart |
TOOL RESTS AND POSTS-PRO SERIES
70-965 | PRO TOOL REST POSTS ONLY (INCLUDES WASHER) 4-5/16″ (110 mm) Long x 1″ (25.4 mm) diameter | $12.99 | In Stock | Add to cart |
70-966 | 70-966 PRO TOOL REST POSTS ONLY (INCLUDES WASHER) 5-1/8″ (130 mm) Long x 1″ (25.4 mm) diameter | $14.99 | In Stock | Add to cart |
70-967 | 70-967 PRO TOOL REST POSTS ONLY (INCLUDES WASHER) 3-3/4″ (95 mm) Long x 1″ (25.4 mm) diameter | $9.99 | In Stock | Add to cart |
70-968 | 70-968 PRO TOOL REST POSTS ONLY (INCLUDES WASHER) 2-3/4″ (70 mm) Long x 5/8″ (15.9 mm) diameter | $9.99 | In Stock | Add to cart |
70-969 | 85mm (3-3/8") x 1" Post only for PRO tool rests | $9.99 | In Stock | Add to cart |
70-970 | 1″ (25.4mm) diameter Spring Washer for PRO tool rests | $3.99 | In Stock | Add to cart |
70-975 | 4” Long x 2-3/16” High. Tool Rest Top has a hardened steel rod welded to a steel body. Tool Rest base has a M12 x1.25 threaded hole to install your choice of Post length and diameter with the compression Spring Washer (each sold separately). | $24.99 | In Stock | Add to cart |
70-976 | 6” Long x 2-3/16” High Tool Rest Top has a hardened steel rod welded to a steel body. Tool Rest base has a M12 x1.25 threaded hole to install your choice of Post length and diameter with the compression Spring Washer (each sold separately). | $29.99 | In Stock | Add to cart |
70-977 | 8” Long x 2-3/16” High Tool Rest Top has a hardened steel rod welded to a steel body. Tool Rest base has a M12 x1.25 threaded hole to install your choice of Post length and diameter with the compression Spring Washer (each sold separately). | $34.99 | In Stock | Add to cart |
70-978 | 12” Long x 2-7/32” High Tool Rest Top has a hardened steel rod welded to a steel body. Tool Rest base has a M12 x1.25 threaded hole to install your choice of Post length and diameter with the compression Spring Washer (each sold separately). | $39.99 | In Stock | Add to cart |
TOOL RESTS AND EXTENSIONS–STANDARD
70-9158 | 5/8" x 1" Tool Rest Bushing | $12.99 | In Stock | Add to cart |
70-924 | 4" Tool Rest 5/8" Post | $16.99 | Out of Stock | Add to cart |
70-926 | 6" Tool Rest 5/8" Post | $22.99 | Out of Stock | Add to cart |
70-928 | 8" Tool Rest 5/8" Post (Same as P70-100-45) | $32.99 | In Stock | Add to cart |
70-959 | Tool Rest Height Extension
|
$29.99 | In Stock | Add to cart |
70-960 | Tool Rest Extension Knuckle
|
$49.99 | In Stock | Add to cart |
TURNING TOOLS AND SETS
70-800 | 70-800 4-Piece Turning Tool Set with Carbide Insert Cutters | $249.99 | In Stock | Add to cart |
70-801 | 16″ Handle only for 70-800 Turning Set | $99.99 | In Stock | Add to cart |
70-802 | 6″ Extension Handle only | $39.99 | In Stock | Add to cart |
70-803 | Counterweight only | $14.99 | In Stock | Add to cart |
70-804 | Side Handle only for 70-800 Turning System | $19.99 | In Stock | Add to cart |
70-805 | 8-3/8” Shaft only for 70-800 Turning System | $49.99 | In Stock | Add to cart |
70-80512 | 12" Shaft for 70-800 Woodturning System only | $69.99 | In Stock | Add to cart |
TURNING TOOL CUTTERS
70-806 | Pan Head Screw M4x 9mm T20 for 70-800 3.2mm Cutters | $1.99 | In Stock | Add to cart |
70-807 | Pan Head Screw M4x 10mm T20 for 70-800 5mm Cutters | $1.99 | In Stock | Add to cart |
70-810 | Round Carbide Insert Cutter only for 70-800 Turning Set | $12.99 | Out of Stock | Add to cart |
70-8105 | Round Carbide Insert Cutter 14mm only PK5 for 70-800 Turning Set | Original price was: $54.99.$48.00Current price is: $48.00. | In Stock | Add to cart |
70-8105NR | Round Negative Rake Carbide Insert Cutter 14mm only PK5 for 70-800 Turning Set | Original price was: $59.99.$44.00Current price is: $44.00. | In Stock | Add to cart |
70-810NR | Negative Rake Round Carbide Insert Cutter only for 70-800 Turning System | $14.99 | Out of Stock | Add to cart |
70-811 | Square Carbide Insert Cutter only for 70-800 Turning Set | $12.99 | Out of Stock | Add to cart |
70-8115 | Square Carbide Insert Cutter 13mm only PK5 for 70-800 Turning Set | $54.99 | In Stock | Add to cart |
70-8115NR | Square Negative Rake Carbide Insert Cutter 13mm only PK5 for 70-800 Turning Set | $59.99 | In Stock | Add to cart |
70-811NR | Negative Rake Square Carbide Insert Cutter only for 70-800 Turning System | $14.99 | In Stock | Add to cart |
70-812 | Diamond Carbide Insert Cutter only for 70-800 Turning Set | $12.99 | In Stock | Add to cart |
70-8125 | Diamond Carbide Insert Cutter only PK5 for 70-800 Turning Set | $54.99 | In Stock | Add to cart |
70-8125NR | Diamond Negative Rake Carbide Insert Cutter only PK5 for 70-800 Turning Set | $59.99 | In Stock | Add to cart |
70-812NR | Negative Rake Diamond Carbide Insert Cutter only for 70-800 Turning System | $14.99 | In Stock | Add to cart |
70-813 | Detailing 3/16R Carbide Insert Cutter only for 70-800 Turning Set | $16.99 | In Stock | Add to cart |
70-814 | R2 Square Carbide Insert Cutter only for 70-800 Turning Set | $12.99 | In Stock | Add to cart |
70-8145 | R2 Square Carbide Insert Cutter 14mm only PK5 for 70-800 Turning Set | $54.99 | In Stock | Add to cart |
70-8145NR | (5 Pack) R2 Square Negative Rake Carbide Insert Cutter 14mm only PK5 for 70-800 Turning Set | $59.99 | In Stock | Add to cart |
70-814NR | Negative Rake R2 Square Carbide Cutter for 70-800 Turning System | $14.99 | In Stock | Add to cart |
70-815 | Semi-Circle 20mm Carbide Insert Cutter only for 70-800 Turning Set | $26.99 | In Stock | Add to cart |
70-816 | Fingernail Carbide Insert Cutter only for 70-800 Turning Set | $34.99 | In Stock | Add to cart |
70-817 | Paisley LEFT Carbide Insert Cutter only for 70-800 Turning Set | $34.99 | In Stock | Add to cart |
70-818 | Paisley RIGHT Carbide Insert Cutter only for 70-800 Turning Set | $34.99 | In Stock | Add to cart |
70-819 | Detail Diamond Insert Cutter, Carbide, for 70-800 Woodturning Tool | $14.99 | In Stock | Add to cart |
70-819NR | Detail Diamond Negative Rake Insert Cutter, Carbide, for 70-800 Woodturning Tool | $16.99 | In Stock | Add to cart |
70-840 | Set of 3 traditional style Bowl Gouges for use with RIKON's 70-800 Woodturning System. Made with M2 High Speed Steel that is noted for resisting high heat and retaining sharp edges. This means you get longer times turning before having to re-sharpen a dull cutting edge.
|
$169.99 | In Stock | Add to cart |
70-841 | 3/8" Bowl Gouge Blade only for 70-800 Turning Set Made of M2 HSS and CRYOGENICALLY treated, noted for resisting high heat and retaining sharp cutting edges. | $54.99 | In Stock | Add to cart |
70-842 | 1/2" Bowl Gouge Blade only for 70-800 Turning Set Made of M2 HSS and CRYOGENICALLY treated, noted for resisting high heat and retaining sharp cutting edges. | $59.99 | In Stock | Add to cart |
70-843 | 5/8" Bowl Gouge Blade only for 70-800 Turning Set made of M2 HSS and CRYOGENICALLY treated, noted for resisting high heat and retaining sharp cutting edges. | $69.99 | In Stock | Add to cart |
70-844 | ¾” Bowl Gouge Blade – ONLY for 70-800 Turning Set made of M2 HSS and CRYOGENICALLY treated, noted for resisting high heat and retaining sharp cutting edges. | $119.99 | In Stock | Add to cart |
70-850 | Set of 3 traditional style Spindle Gouges for use with RIKON's 70-800 Woodturning System. Made with M2 High Speed Steel that is noted for resisting high heat and retaining sharp edges. This means you get longer times turning before having to re-sharpen a dull cutting edge.
|
$149.99 | In Stock | Add to cart |
70-851 | 1/4" Spindle Gouge Blade only for 70-800 Turning Set | $44.99 | In Stock | Add to cart |
70-852 | 3/8" Spindle Gouge Blade only for 70-800 Turning Set | $52.99 | In Stock | Add to cart |
70-853 | 1/2" Spindle Gouge Blade only for 70-800 Turning Set | $54.99 | In Stock | Add to cart |
70-8999 | Assorted Carbide Insert Cutters PK5 for 70-800 Turning Set (2 70-810, 811, 1 70-812) | $54.99 | In Stock | Add to cart |
Mobility Kits
MOBILITY KITS
13-321 | Mobility Kit for 10-321 | $99.99 | In Stock | Add to cart |
13-324 | Mobility Kit Baseplate Adapter for 10-324 and 10-324TG* *13-324 Mobility Kit Baseplate Adapter is required to use 13-326 Mobility Kit with 10-324 and10-324TG bandsaws. | $39.99 | In Stock | Add to cart |
13-326 | Mobility Kit w/Foot Pedal for 10-324*, 10-324TG*, 10-325, 10-326 *13-324 Mobility Kit Baseplate Adapter is required to use 13-326 Mobility Kit with 10-324 and10-324TG bandsaws. |
$149.99 | In Stock | Add to cart |
13-345 | Mobility Kit for 10-341, 342, 345, 346, 347, 350, 351, 353, 370 | $149.99 | In Stock | Add to cart |
13-913 | Stand for 10” Bandsaws, 10-305, 10-306, 10-3061 | Original price was: $109.99.$88.00Current price is: $88.00. | In Stock | Add to cart |
23-901 | Flexible/Expandable Roller Stand 200 lb Capacity | $299.99 | In Stock | Add to cart |
25-905 | Mobility Kit for 25-210(H) Planer/Jointer | $99.99 | Out of Stock | Add to cart |
52-910 | 28" Stand; top 22-1/2" x 10-1/2", base 33" x 21" | $129.99 | In Stock | Add to cart |
63-900 | Mobility Kit for 63-100, 63-110 | $32.99 | In Stock | Add to cart |
70-971 | Mobility Caster Set for 70-3040 and 70-1824VSR | $269.99 | Out of Stock | Add to cart |
Planers/Jointer
PLANER & JOINTER
23-901 | Flexible/Expandable Roller Stand 200 lb Capacity | $299.99 | In Stock | Add to cart |
23-959 | Mobility Kit for 20-106H & 20-108H Jointers and 23-150H Planer | $99.99 | In Stock | Add to cart |
25-410 | Metal Stand for 25-130, 25-130H, 25-131, 25-131H | $99.99 | In Stock | Add to cart |
25-498 | Replacement T25 Screws for 25-130H Pack Of 10 | $9.99 | In Stock | Add to cart |
25-499 | HSS 2-Edge Inserts for 25-130H, 25-131H Planers & 20-600H, 20-800H Jointers 10 PK | $59.99 | Out of Stock | Add to cart |
25-499C | Carbide 2-Edge Inserts for 25-130H, 25-131H Planers & 20-600H, 20-800H Jointer 10 PK | $99.99 | In Stock | Add to cart |
25-593 | Replacement T25 Screws for 25-130H, 25-131H Planers & 20-600H Jointer 10 PK | $9.99 | In Stock | Add to cart |
25-594 | Mounting Screws for Helical Inserts Flat Head T25 PK 10 | $10.99 | In Stock | Add to cart |
25-599 | Carbide 4-Edge Helical Cutter Inserts 15mm x 15mm x 2.5mm (10 - Pack) | $89.99 | In Stock | Add to cart |
25-699 | Carbide 4-Edge Helical Cutter Inserts 14mm x 14mm x 2mm (10 - Pack) |
$89.99 | In Stock | Add to cart |
25-905 | Mobility Kit for 25-210(H) Planer/Jointer | $99.99 | Out of Stock | Add to cart |
C20-910 | 10" Replacements Knives 3pk for 25-010 | $54.99 | Out of Stock | Add to cart |
C20-912 | 12" Replacements Knives 3pk for 25-200 | $84.99 | Out of Stock | Add to cart |
C20-915 | 15″ Replacement HSS Knives for 23-150 (3 Pack) 15-5/32″ x 1″ x 1/8″ | $59.99 | In Stock | Add to cart |
Replacement Key Switches
REPLACEMENT SWITCH KEYS
CLSM | Lock Switch Mustard California Proposition 65 Warning |
$1.99 | In Stock | Add to cart |
CLSR | Switch Key Red California Proposition 65 Warning |
$1.99 | In Stock | Add to cart |
CLSY | Lock Switch Yellow California Proposition 65 Warning |
$1.99 | In Stock | Add to cart |
Sanding
SANDING BELTS
50-2036Z | 2" x 72" 36 Grit Sanding Belt - Zirconia Alumina | $8.99 | In Stock | Add to cart |
50-2060Z | 2" x 72" 60 Grit Sanding Belt - Zirconia Alumina | $7.99 | In Stock | Add to cart |
50-2080Z | 2" x 72" 80 Grit Sanding Belt - Zirconia Alumina | $6.99 | In Stock | Add to cart |
50-3080 | 1"X42" Belt 80 Grit (PK5) California Proposition 65 Warning |
$12.99 | In Stock | Add to cart |
50-3120 | 1"X42" Belt 120 Grit (PK5) California Proposition 65 Warning |
$12.99 | In Stock | Add to cart |
50-3150 | 1"X42" Belt 150 Grit (PK5) California Proposition 65 Warning |
$12.99 | In Stock | Add to cart |
50-3180 | 1"X42" Belt 180 Grit (PK5) California Proposition 65 Warning |
$12.99 | In Stock | Add to cart |
50-3220 | 1"X42" Belt 240 Grit (PK5) California Proposition 65 Warning |
$12.99 | In Stock | Add to cart |
50-3320 | 1"X42" Belt 320 Grit (PK5) California Proposition 65 Warning |
$12.99 | In Stock | Add to cart |
50-3999 | 1"X42" Belt Asst Grit (PK10) California Proposition 65 Warning |
$19.99 | In Stock | Add to cart |
50-4080 | 4" x 36"Sanding Belt 80 grit (PK2) California Proposition 65 Warning |
$12.99 | In Stock | Add to cart |
50-4120 | 4" x 36" Sanding Belt 120 grit (PK2) California Proposition 65 Warning |
$12.99 | In Stock | Add to cart |
50-4150 | 4" x 36" Sanding Belt 150 grit (PK2 California Proposition 65 Warning |
$12.99 | In Stock | Add to cart |
50-4180 | 4" x 36"Sanding Belt 180 grit (PK2) California Proposition 65 Warning |
$12.99 | In Stock | Add to cart |
50-4220 | 4" x 36" Sanding Belt 240 grit (PK2) California Proposition 65 Warning |
$12.99 | In Stock | Add to cart |
50-4999 | 4" x 36" Sanding Belt Asst (2ea 80,150,240 grit) (PK6) California Proposition 65 Warning |
$39.99 | In Stock | Add to cart |
50-6080 | 6" x 48"Sanding Belt 80 grit (PK2) California Proposition 65 Warning |
$19.99 | In Stock | Add to cart |
50-6120 | 6" x 48" Sanding Belt 120 grit (PK2) California Proposition 65 Warning |
$19.99 | In Stock | Add to cart |
50-6150 | 6" x 48" Sanding Belt 150 grit (PK2) California Proposition 65 Warning |
$19.99 | In Stock | Add to cart |
50-6180 | 6" x 48"Sanding Belt 180 grit (PK2) California Proposition 65 Warning |
$19.99 | In Stock | Add to cart |
50-6220 | 6" x 48" Sanding Belt 240 grit (PK2) California Proposition 65 Warning |
$19.99 | In Stock | Add to cart |
50-6999 | 6" x 48" Sanding Belt Asst (2 ea 80,150,240 grit) (PK6) California Proposition 65 Warning |
$39.99 | In Stock | Add to cart |
50-9080 | 1" x 30" Belt 80 Grit (Pk 10) California Proposition 65 Warning |
$14.99 | In Stock | Add to cart |
50-9120 | 1" x 30" Belt 120 Grit (Pk 10) California Proposition 65 Warning |
$14.99 | In Stock | Add to cart |
50-9150 | 1" x 30" Belt 150 Grit (Pk 10) California Proposition 65 Warning |
$14.99 | In Stock | Add to cart |
50-9180 | 1" x 30" Belt 180 Grit (Pk 10) California Proposition 65 Warning |
$14.99 | In Stock | Add to cart |
50-9220 | 1" x 30" Belt 240 Grit (Pk 10) California Proposition 65 Warning |
$14.99 | In Stock | Add to cart |
50-9999 | 1" x 30" Belt Asst Grit 2ea 80,120,150,180, & 240 (Pk 10) California Proposition 65 Warning |
$14.99 | In Stock | Add to cart |
SANDING DISCS
SANDING DRIVE BELTS
52-911 | Drive Belt for 50-112 (Same as P50-112-70) | $11.99 | In Stock | Add to cart |
52-920 | Drive Belt for 50-120 (Same as P50-120-54) | $14.99 | In Stock | Add to cart |
P50-110-43 | Drive Belt for 50-110 | $9.99 | In Stock | Add to cart |
P50-114-68 | Drive Belt for 50-114 | $3.99 | In Stock | Add to cart |
P50-122-8 | Drive Belt for 50-122 (A580) | $3.98 | In Stock | Add to cart |
P50-142-107 | V-Belt for 50-142 | $9.99 | Out of Stock | Add to cart |
P50-144-38 | V-Belt for 50-144 | $5.99 | In Stock | Add to cart |
SANDING DRUMS/ SLEEVES
50-3001 | 1" Spindle Sanding Drum Assembly California Proposition 65 Warning |
$19.99 | In Stock | Add to cart |
50-3002 | 2" Spindle Sanding Drum Assembly California Proposition 65 Warning |
$24.99 | In Stock | Add to cart |
50-3003 | 3" Spindle Sanding Drum Assembly California Proposition 65 Warning |
$39.99 | In Stock | Add to cart |
50-3012 | 1/2" Spindle Sanding Drum Assembly California Proposition 65 Warning |
$14.99 | In Stock | Add to cart |
50-3034 | 3/4" Spindle Sanding Drum Assembly California Proposition 65 Warning |
$16.99 | In Stock | Add to cart |
50-3112 | 1 1/2" Spindle Sanding Drum Assembly California Proposition 65 Warning |
$22.99 | In Stock | Add to cart |
50-45060 | Spindle Sanding Sleeves 60 Grit, Pack of 5 ( 1 each, 1/2", 3/4, 1", 1 1/2", and 2") California Proposition 65 Warning |
$11.99 | In Stock | Add to cart |
50-45100 | Spindle Sanding Sleeves 100 Grit, Pack of 5 ( 1 each, 1/2", 3/4, 1", 1 1/2", and 2") California Proposition 65 Warning |
$11.99 | In Stock | Add to cart |
50-45150 | Spindle Sanding Sleeves 150 Grit, Pack of 5 ( 1 each, 1/2", 3/4, 1", 1 1/2", and 2") California Proposition 65 Warning |
$11.99 | In Stock | Add to cart |
50-45303 | Spindle Sanding Sleeves 3inch, Pack of 3 (1ea 60,100 & 150 grit) California Proposition 65 Warning |
$11.99 | In Stock | Add to cart |
Stands And Workstations
MACHINERY STANDS
13-622 | 13-622 Scroll Saw Stand | $99.99 | In Stock | Add to cart |
13-913 | Stand for 10” Bandsaws, 10-305, 10-306, 10-3061 | Original price was: $109.99.$88.00Current price is: $88.00. | In Stock | Add to cart |
25-410 | Metal Stand for 25-130, 25-130H, 25-131, 25-131H | $99.99 | In Stock | Add to cart |
52-910 | 28" Stand; top 22-1/2" x 10-1/2", base 33" x 21" | $129.99 | In Stock | Add to cart |
70-913 | Lathe Stand Extension for 70-910, 70-920 | $129.99 | In Stock | Add to cart |
70-920 | Universal Stand for Mini and MIDI Lathes | $199.99 | In Stock | Add to cart |
80-910 | Bench Grinder Stand | $159.99 | In Stock | Add to cart |
98-4600 | Universal Stand with Adjustable legs make this ideal for planers, jointers, scroll saws etc.. • Compact design for easy storage and carrying. • Work platform size: 18” x 23” • Width adjustable from 36” – 72” • Height from work platform is 32” • Legs fold/unfold easily, with spring lock on legs. • Adjustable height 23”- 32” | Original price was: $179.99.$145.00Current price is: $145.00. | In Stock | Add to cart |
ROLLER STANDS
23-901 | Flexible/Expandable Roller Stand 200 lb Capacity | $299.99 | In Stock | Add to cart |
SAWHORSES
98-2600 | PRO Adjustable Sawhorses have new innovative features that traditional style sawhorses can't compete with. The all-steel construction gives a load capacity rating of 1300 lbs. or 2600 lbs. for a pair!
Sold in Packs of 2 sawhorses.
|
Original price was: $199.99.$160.00Current price is: $160.00. | In Stock | Add to cart |
WORKSTATIONS
98-5500 | Multifunction Workbench easily converts to work platform with built-in tool tray, (incl. protractor and ruler).
|
$249.99 | In Stock | Add to cart |
Table Saw/Scroll Saw
TABLE SAW/ SCROLL SAW
10-9123 | Flex Shaft Attachment for 10-600VS | $24.99 | In Stock | Add to cart |
10-9124 | 64 PC Accessory Kit for 10-600VS | $34.99 | In Stock | Add to cart |
13-299 | Dado Insert for 10-201 | $49.99 | In Stock | Add to cart |
13-500 | Dado Insert for 10-205 10" Contractors Saw | $29.99 | In Stock | Add to cart |
13-600 | Zero Clearance Insert for 10" Portable Table Saw 11-600S | $39.99 | In Stock | Add to cart |
13-622 | 13-622 Scroll Saw Stand | $99.99 | In Stock | Add to cart |
90-600 | 99-600 Foot Switch with plug for 22” Scroll Saw | $19.99 | In Stock | Add to cart |
C10-100 | Safety Push Stick | $6.99 | In Stock | Add to cart |
P10-600VS-26 | Replacement Bulb 120V/10W | $3.99 | In Stock | Add to cart |
P10-600VS-96 | Pin-Less Blade Holder | $6.99 | In Stock | Add to cart |
Tool Storage
Tool Storage
99-462 | Model 99-462. Heavy Duty Woodworker’s Backpack | $50.00 | In Stock | Add to cart |
99-500 | Turning Tool Roll | $29.99 | In Stock | Add to cart |
Work Light
WORK LIGHTS
12-202 | LED Gooseneck Worklight with Magnetic Base and Magnetic Clip | $69.99 | In Stock | Add to cart |