Air Filtration

AIR FILTRATION
61-905 Inner Filter Bag (1 micron) for 61-200, 61-750, 62-100 $79.99 In Stock Add to cart
61-910C Outer Charcoal Filter for 61-200, 61-750, 62-100 $69.99 In Stock Add to cart
61-911F Outer Filter (5 micron) for 61-200/ 62-100 / 61-750 $25.99 Out of Stock Add to cart
62-901F Outer Filter 9-1/2X16-1/2" X 2" SEP Pleated Filter Merv 8 for 62-400/450 $19.99 In Stock Add to cart
62-902F Inner Filter Bag 9-1/2"X16-1/2" X 3/4" Merv 12 for 62-400/450 $24.99 In Stock Add to cart

Bandsaw accessories & blades

BANDSAW BLADES
19-1100 111" x 1/4" 025 6 TPI Hook Blade
California Proposition 65 Warning
$29.99 Out of Stock Add to cart
19-1101 111" x 3/16" 025 10 TPI Reg Blade
California Proposition 65 Warning
$29.99 In Stock Add to cart
19-1102 111" x 3/8" 025 4 TPI Hook Blade
California Proposition 65 Warning
$29.99 Out of Stock Add to cart
19-1103 111" x 1/2" 025 3 TPI Hook Blade
California Proposition 65 Warning
$29.99 In Stock Add to cart
19-1105 111" x 5/8" 025 4 TPI Regular Blade
California Proposition 65 Warning
$29.99 In Stock Add to cart
19-1106

Resaw Pro Carbide Tipped Blade 19-1106 111" x 3/4” x .035” x 3 TPI

$149.99 In Stock Add to cart
19-1210 124" x 1/4" 025 x 6TPI Hook Blade All-Pro
California Proposition 65 Warning
$29.99 Out of Stock Add to cart
19-1211 124" x 3/8" 025 4TPI Hook Blade All-Pro
California Proposition 65 Warning
$29.99 Out of Stock Add to cart
19-1212 124" x 1/2" x 025 3 TPI Hook Blade All-Pro
California Proposition 65 Warning
$39.99 In Stock Add to cart
19-1213 124" x 5/8" 025 3 TPI Hook Blade All-Pro
California Proposition 65 Warning
$39.99 Out of Stock Add to cart
19-1214 124" x 3/4" 032 3 TPI Hook Blade All-Pro
California Proposition 65 Warning
$39.99 In Stock Add to cart
19-1215 124" x 1" 035 2 TPI Hook Blade All-Pro
California Proposition 65 Warning
$42.99 In Stock Add to cart
19-1410 142" x 3/8" 025 4 TPI Hook Blade
California Proposition 65 Warning
$29.99 Out of Stock Add to cart
19-1411 142" x 1/2" 025 3 TPI Hook Blade
California Proposition 65 Warning
$29.99 In Stock Add to cart
19-1412 142" x 5/8" 025 3 TPI Hook Blade
California Proposition 65 Warning
$29.99 In Stock Add to cart
19-1413 142" x 3/4" 032 3 TPI Hook Blade
California Proposition 65 Warning
$29.99 Out of Stock Add to cart
19-1511 111" x 1/2" x .025 x 14 TPI Reg. Bi-Metal Bandsaw Blade
California Proposition 65 Warning
$59.99 In Stock Add to cart
19-1512 111" x 1/2" x .025 x 18 TPI Reg. Bi-Metal Bandsaw Blade
California Proposition 65 Warning
$59.99 In Stock Add to cart
19-1513 111" x 3/4" x .035 x 8/12 TPI Vari. Bi-Metal Bandsaw Blade
California Proposition 65 Warning
$64.99 In Stock Add to cart
19-1514 111" x 3/4" x .035 x 10/14 TPI Vari. Bi-Metal Bandsaw Blade
California Proposition 65 Warning
$64.99 In Stock Add to cart
19-1520 142” x 1/2” x 025 x 14 TPI Bi-Metal Reg Metal Cutting Blade
California Proposition 65 Warning
$64.99 In Stock Add to cart
19-1521 142” x 1/2” x 025 x 18 TPI Bi-Metal Reg Metal Cutting Blade
California Proposition 65 Warning
$64.99 In Stock Add to cart
19-1522 142” x 3/4” x 035 x 8/12TPI Var Metal Cutting Blade Bi-Metal
California Proposition 65 Warning
$69.99 Out of Stock Add to cart
19-1523 142” x 3/4” x 035 x 10/14TPI Var Metal Cutting Blade Bi-Metal
California Proposition 65 Warning
$69.99 In Stock Add to cart
19-1601 163” x 3/8” x 025 x 4TPI Hook Wood Cutting Blade
California Proposition 65 Warning
$79.99 In Stock Add to cart
19-1602 163” x 5/8” x 025 x 3TPI Hook Wood Cutting Blade
California Proposition 65 Warning
$49.99 In Stock Add to cart
19-1603 163” x 3/4” x 032 x 3TPI Hook Wood Cutting Blade
California Proposition 65 Warning
$49.99 In Stock Add to cart
19-1604 163” x 1” x 035 x 2TPI Hook Wood Cutting Blade
California Proposition 65 Warning
$59.99 Out of Stock Add to cart
19-1701 153" x 3/8" x .025 x 4TPI Hook Blade
California Proposition 65 Warning
$29.99 In Stock Add to cart
19-1702 153" x 1/2" x .025 x 3TPI Hook Blade
California Proposition 65 Warning
$34.99 In Stock Add to cart
19-1703 153" x 5/8" x .025 x 3TPI Hook Blade
California Proposition 65 Warning
$34.99 In Stock Add to cart
19-1704 153" x 3/4" x .032 x 3TPI Hook Blade
California Proposition 65 Warning
$39.99 In Stock Add to cart
19-1705 153" x 1" x .035 x 2TPI Hook Blade
California Proposition 65 Warning
$44.99 In Stock Add to cart
19-1801 162" x 3/8" x .025 x 4TPI Hook Blade
California Proposition 65 Warning
$39.99 In Stock Add to cart
19-1802 162" x 1/2" x .025 x 3TPI Hook Blade
California Proposition 65 Warning
$34.99 In Stock Add to cart
19-1803 162" x 5/8" x .025 x 3TPI Hook Blade
California Proposition 65 Warning
$39.99 In Stock Add to cart
19-1804 162" x 3/4" x .032 x 3TPI Hook Blade …
California Proposition 65 Warning
$44.99 Out of Stock Add to cart
19-1805 162" x 1" x .035 x 2TPI Hook Blade ..
California Proposition 65 Warning
$49.99 In Stock Add to cart
19-1901 176" x 3/8" x .025 x 4TPI Hook Bandsaw Blade
California Proposition 65 Warning
$49.99 In Stock Add to cart
19-1902 176" x 1/2" x .025 x 3TPI Hook Bandsaw Blade
California Proposition 65 Warning
$49.99 In Stock Add to cart
19-1903 176" x 5/8" x .025 x 3TPI Hook Bandsaw Blade
California Proposition 65 Warning
$59.99 In Stock Add to cart
19-1904 176" x 3/4" x .032 x 3TPI Hook Bandsaw Blade
California Proposition 65 Warning
$59.99 In Stock Add to cart
19-1905 176" x 1" x .035 x 2TPI Hook Bandsaw Blade
California Proposition 65 Warning
$64.99 In Stock Add to cart
19-1906 176" x 1-1/4" x .035 x 1.3TPI Hook Bandsaw Blade
California Proposition 65 Warning
$69.99 In Stock Add to cart
19-6401 $44.99 In Stock Add to cart
19-6402 $44.99 In Stock Add to cart
19-6510 65" x 1/2" 025 4TPI Skip Carbon Steel Blade
California Proposition 65 Warning
$19.99 In Stock Add to cart
19-7002 70-1/2" x 3/16" 025 10TPI Reg Blade
California Proposition 65 Warning
$24.99 In Stock Add to cart
19-7003 70-1/2" x 1/4" 025 6 TPI Hook Blade
California Proposition 65 Warning
$24.99 Out of Stock Add to cart
19-7004 70-1/2" x 3/8" 025 4 TPI Hook Blade
California Proposition 65 Warning
$24.99 In Stock Add to cart
19-7005 70-1/2" x 1/2" 025 3 TPI Hook Blade
California Proposition 65 Warning
$24.99 In Stock Add to cart
19-7006 70-1/2 x 1/8 x 018 x 8 TPI Hook Blade
California Proposition 65 Warning
$24.99 In Stock Add to cart
19-7007 70-1/2 x 1/8 x 018 x 14 TPI Hook Blade
California Proposition 65 Warning
$24.99 In Stock Add to cart
19-7008 70-1/2" x 5/16" Wide 0.016" Gauge 6 TPI Hook Style $24.99 In Stock Add to cart
19-7010 70-1/2” 1/2” 0.025” 14 TPI Bi-Metal Reg Metal Cutting Blade $54.99 In Stock Add to cart
19-7011 19-7011 70-1/2” 1/2” 0.025” 18 TPI Bi-Metal Reg Metal Cutting Blade $54.99 Out of Stock Add to cart
19-7012

19-7012 70-1/2” 1/2” 0.025” 10/14 TPI Bi-Metal Reg Metal Cutting Blade

$54.99 Out of Stock Add to cart
19-7013

19-7013 70-1/2” 1/2” 0.025” 14/18 TPI Bi-Metal Reg Metal Cutting Blade

$54.99 In Stock Add to cart
19-7602 76-3/4" x 5/8" 0.0197" 4TPI Reg Stainless Blade California Proposition 65 Warning $29.99 Out of Stock Add to cart
19-9310 93-1/2" x 3/16" 025 10 TPI Reg Blade
California Proposition 65 Warning
$29.99 In Stock Add to cart
19-9311 93-1/2" x 3/8" 025 4 TPI Hook Blade
California Proposition 65 Warning
$29.99 In Stock Add to cart
19-9312 93-1/2" x 1/2" 025 3 TPI Hook Blade
California Proposition 65 Warning
$29.99 In Stock Add to cart
19-9313 93-1/2" x 5/8" 025 3 TPI Hook Blade
California Proposition 65 Warning
$29.99 In Stock Add to cart
19-9910 99-3/4" x 1/4" 025 6 TPI Hook Blade
California Proposition 65 Warning
$34.99 In Stock Add to cart
19-9911 99-3/4" x 3/8" 025 4 TPI Hook Blade
California Proposition 65 Warning
$34.99 In Stock Add to cart
19-9912 99-3/4" x 1/2" 025 3 TPI Hook Blade
California Proposition 65 Warning
$34.99 Out of Stock Add to cart
19-9913 99-3/4" x 5/8" 025 3 TPI Hook Blade
California Proposition 65 Warning
$34.99 In Stock Add to cart
19-9914 99-3/4" x 3/4" 032 3 TPI Hook Blade
California Proposition 65 Warning
$34.99 Out of Stock Add to cart
BANDSAW TOOL-LESS GUIDE KIT
10-900 Spring Loaded Tool-Less Blade Guide Retrofit Kit System fits 10-324/10-325
$159.99 In Stock Add to cart
BANDSAW FENCES
10-920 Quick-Adjust 6” Tall Rip Fence System for use with most RIKON Bandsaws $269.99 Out of Stock Add to cart
10-921 6” Tall Rip Fence Extrusion and Re-Saw Bar Set for 10-325 $149.99 In Stock Add to cart
10-924 Flip Stop for 6” tall, extruded aluminum fences on RIKON’s 14”, 18” and 24” Bandsaws and 10-920, 10-921 Fence Systems $24.99 In Stock Add to cart
10-926 Deluxe Rip Fence System for 10-305 $49.99 Out of Stock Add to cart
13-900 Rip Fence & Rail Assembly for 10-320, 10-321, RK14CS

$99.99 Out of Stock Add to cart
BANDSAW ACCESSORIES
10-900 Spring Loaded Tool-Less Blade Guide Retrofit Kit System fits 10-324/10-325
$159.99 In Stock Add to cart
12-202 LED Gooseneck Worklight with Magnetic Base and Magnetic Clip $69.99 In Stock Add to cart
13-321 Mobility Kit for 10-321 $99.99 In Stock Add to cart
13-324 Mobility Kit Baseplate Adapter for 10-324 and 10-324TG* *13-324 Mobility Kit Baseplate Adapter is required to use 13-326 Mobility Kit with 10-324 and10-324TG bandsaws. $39.99 Out of Stock Add to cart
13-326

Mobility Kit w/Foot Pedal for 10-324*, 10-324TG*, 10-325, 10-326

*13-324 Mobility Kit Baseplate Adapter is required to use 13-326 Mobility Kit with 10-324 and10-324TG bandsaws.

 
$149.99 Out of Stock Add to cart
13-345 Mobility Kit for 10-341, 342, 345, 346, 347, 350, 351, 353, 370 $149.99 In Stock Add to cart
13-900 Rip Fence & Rail Assembly for 10-320, 10-321, RK14CS

$99.99 Out of Stock Add to cart
13-912 Miter Gauge for 3/4” x 3/8” (T- slot Tables Only) $59.99 In Stock Add to cart
13-913 Stand for 10" Bandsaw 10-305 $88.00 In Stock Add to cart
13-920 Miter Gauge for 10-305 & 10-306 $34.99 In Stock Add to cart
99-201 Inclinometer with Laser $39.99 In Stock Add to cart
99-202 Height Gauge & Caliper $29.99 In Stock Add to cart
C10-393 Table insert (4-Pack) $14.99 In Stock Add to cart
C10-405 Rubber wheel tire (ea,) $14.99 In Stock Add to cart
C10-405U Urethane wheel tire (ea.) $19.99 In Stock Add to cart
BANDSAW DRIVE BELTS
C10-988 Multi-vee belt (Same as P10-342-10F) - Mfg# 1-5PJ1023GB16588 $24.99 In Stock Add to cart
C10-989 Multi-V Belt for 10-353 $17.99 In Stock Add to cart
C10-991 Drive Belt for 10-300, 10-305 $14.99 In Stock Add to cart
C10-992 Drive Belt for 10-340, 10-345 $24.99 In Stock Add to cart
C10-993 Drive Belt for 10-350, 10-350BAL, 10-351 $27.99 In Stock Add to cart
C10-994 Drive Belt for 10-370 $27.99 In Stock Add to cart
C10-995 Drive Belt for RK14CS, 10-320, 10-321, 10-324, 10-325, 10-326 $19.99 In Stock Add to cart
C10-996 Drive Belt for 10-380 $26.99 In Stock Add to cart
C10-997 Drive Belt for 10-315 $16.99 Out of Stock Add to cart
C10-998 Drive Belt for 10-308 $14.99 In Stock Add to cart
C10-999 Drive Belt for 10-346, 10-347 $24.99 In Stock Add to cart
BANDSAW FENCES
10-920 Quick-Adjust 6” Tall Rip Fence System for use with most RIKON Bandsaws $269.99 Out of Stock Add to cart
10-921 6” Tall Rip Fence Extrusion and Re-Saw Bar Set for 10-325 $149.99 In Stock Add to cart
10-924 Flip Stop for 6” tall, extruded aluminum fences on RIKON’s 14”, 18” and 24” Bandsaws and 10-920, 10-921 Fence Systems $24.99 In Stock Add to cart
10-926 Deluxe Rip Fence System for 10-305 $49.99 Out of Stock Add to cart
13-900 Rip Fence & Rail Assembly for 10-320, 10-321, RK14CS

$99.99 Out of Stock Add to cart
BANDSAW GUIDE BEARINGS
C10-108 Guide Bearings for 10-300, 10-305, 10-308 (6 Pack)
California Proposition 65 Warning
$22.99 Out of Stock Add to cart
C10-109 Guide Bearings for 10-306, 10-3061 ,10-315, 10-320, 10-321, 10-324, 10-324TG, 10-325 (6 Pack)California Proposition 65 Warning $24.99 In Stock Add to cart
C10-144 Guide Bearings for 10-340, 10-341, 10-345, 10-370, 10-380 (10 Pack)
California Proposition 65 Warning
$44.99 In Stock Add to cart
C10-145 Guide Bearings for 10-900 Bandsaw Retrofit Kit (6 Pack)
California Proposition 65 Warning
$29.99 In Stock Add to cart
C10-209 Guide Bearings for 10-350, 350BAL, 10-351 (10 Pack)
California Proposition 65 Warning
$44.99 Out of Stock Add to cart
C10-326 Guide Bearings for 10-326, 10-342, 10-347, 10-353
California Proposition 65 Warning
$46.99 In Stock Add to cart
BANDSAW GUIDE KITS
10-900 Spring Loaded Tool-Less Blade Guide Retrofit Kit System fits 10-324/10-325
$159.99 In Stock Add to cart
BANDSAW MITER GAUGES
13-912 Miter Gauge for 3/4” x 3/8” (T- slot Tables Only) $59.99 In Stock Add to cart
13-920 Miter Gauge for 10-305 & 10-306 $34.99 In Stock Add to cart
BANDSAW TABLE INSERTS
C10-372 Table Insert for 10-300 10" Bandsaw $9.99 In Stock Add to cart
C10-391 Table Inserts (4 Pack) All Rikon 14" & 18" except 10-346 $19.99 Out of Stock Add to cart
C10-392 Zero Clearance Table Inserts (4 Pack) Fits all RIKON 14” & 18” Bandsaws except 10-346/10-347 $19.99 Out of Stock Add to cart
C10-394 C10-394: Zero Clearance Table Inserts for 10-305, 10-306 & 10-3061 (Pack 4)   $14.99 Out of Stock Add to cart
C10-395 Table Insert aluminum. All Rikon 14"& 18" Bandsaws except 10-346 $14.99 Out of Stock Add to cart
C10-396 Table Insert for 10-346 (square) $12.99 In Stock Add to cart
BANDSAW TIRES
C10-415 12" Rubber Wheel Tire for 10-315 $14.99 Out of Stock Add to cart
C10-421 14" Rubber Wheel Tire for 10-320, 10-321, RK14CS $22.99 In Stock Add to cart
C10-425U 14" Yellow Urethane Tires   $22.99 In Stock Add to cart
C10-445 18" Rubber Wheel Tire for 10-340, 10-345, 10-370 $24.99 Out of Stock Add to cart
C10-446 18" Rubber Wheel Tire for 10-341, 10-342, 10-346, 10-347 $24.99 In Stock Add to cart
C10-480 22" Rubber Wheel Tire for 10-380 $44.99 In Stock Add to cart

No accessories found

Bench Grinders/Buffer/Sharpeners

BENCH GRINDER/ BUFFER/ SHARPENERS
1-1/2" CBN Wheels RIKON's PROseries 8" sharpening wheels features CBN (Cubic Boron Nitride) abrasives, one of the hardest materials besides diamond! Mounted on your grinder, these wheels will put razor sharp edges on your hardened steel tools - woodturning and carving gouges, chisels, plane blades and other cutting instruments. Each sharpening wheel is precision machined from solid aluminum, balanced, and bonded with fine CBN abrasives that are ideal for sharpening hardened heat-treated steel tools. CBN wheels cut quickly with minimum pressure, stay cool and never needs dressing or shaping. Wheels fit onto grinders with 5/8" shafts and work best on low-speed grinders operating below 2,000 RPMs. The 1-1/2” wide surface with 1/4” curved radius edges is available in 80, 180, 350 or 600 grit to offer woodworkers the full range of sharpening from the initial grinding/shaping stage to creating final razor-sharp edges on tools. Note that CBN wheels are not for use with soft carbon steel, aluminum or other soft metals which will ruin the abrasives and void the warranty. Stones are packed in cardboard boxes for safe storage and transporting. • 82-5080R RIKON PROseries 8" x 1.5" w/Radius 80 Grit CBN Sharpening Wheel, 5/8" arbor hole • 82-5180R RIKON PROseries 8" x 1.5" w/Radius 180 Grit CBN Sharpening Wheel, 5/8" arbor hole • 82-5350R RIKON PROseries 8" x 1.5" w/Radius 350 Grit CBN Sharpening Wheel, 5/8" arbor hole • 82-5600R RIKON PROseries 8" x 1.5" w/Radius 600 Grit CBN Sharpening Wheel, 5/8" arbor hole $159.99 In Stock Add to cart
80-899 Wheel Flange for Low Speed Grinder for 80-805 $3.99 In Stock Add to cart
80-901 2.5x Magnifying Eye Shield Lens Kit for 80-805 $9.99 In Stock Add to cart
80-902 Left Hand FLAT Tool Rest for 80-805, 80-808 $9.99 Out of Stock Add to cart
80-903 Spherical Washer Set of 3 for Grinders $9.99 In Stock Add to cart
80-910 Bench Grinder Stand $159.99 In Stock Add to cart
82-1005 82-1005: PRO SHARPENING SYSTEM Sharpen your woodturning tools like a PRO! Used with your 6” or 8” bench grinder, this System includes the basic set-up for putting perfect, sharp edges on gouges, chisels, scrapers and other blades. The 2 adjustable armsallow for easy setting of different grinding angles for your shop tools. Set includes: Locking Base Assemblies (2), Long V-Arm, Short 90 degree Platform Arm, Tool Rest Platform for Short Arm, Adjustable Lever Handle and Mounting Hardware. *80-808 8" GRINDER SOLD SEPARATELY $149.99 In Stock Add to cart
82-1006 Skew Grinding Jig for 82-1005 Pro Sharpening System $54.99 In Stock Add to cart
82-1007 Fingernail Gouge Grinding Attachment for 82-1005 $59.99 In Stock Add to cart
82-1008 Angle Gauge for 82-1005 $49.99 In Stock Add to cart
82-901 Turning Gouge Jig for 82-100 $39.99 In Stock Add to cart
82-902 Carving Tool Jig for 82-100 $29.99 In Stock Add to cart
C81-801 8" x 1/2" Buffing Wheel with 1" Arbor Hole, white cotton, spiral sewn $19.99 In Stock Add to cart
C81-802 8" x 1/2" Buffing Wheel with 1" Arbor Hole, Yellow  Linen, spiral sewn $22.99 In Stock Add to cart
P80-800VS-37 8" Wire Wheel, 5/8"  Hub $16.99 In Stock Add to cart
P80-800VS-70 8" Grinding Wheel 60 Grit, 5/8" Hub $16.99 In Stock Add to cart
P80-805-49 60 Grit Replacement Wheel $16.99 In Stock Add to cart
P80-805-5 120 Grit Replacement Wheel $16.99 In Stock Add to cart
P80-805-54 Diamond Wheel Dresser $5.79 In Stock Add to cart
P81-600-3 6" Spiral Sewn Replacement Buffing Wheel $24.99 In Stock Add to cart
P81-608-3 8" Spiral Sewn Replacement Buffing Wheel $24.99 In Stock Add to cart
P82-100-21 Polishing wheel M200x30xM12.5mm $34.99 Out of Stock Add to cart
P82-100-9 Grinding wheel M200×40×M12mm $29.99 In Stock Add to cart

Cordless Tool

CORDLESS TOOLS ACC
31-123 12V 2.0 Ah Lithium Ion Battery $24.00 In Stock Add to cart
31-124 12V Charger $24.00 In Stock Add to cart
31-206 4” Sponge Pad (EA) $3.20 In Stock Add to cart
31-207 2” (51mm) Hook & Loop Pad (EA) w/10mm Thread $6.40 In Stock Add to cart
31-208 4” (100mm) Hook & Loop Pad (EA) w/10mm Thread $4.80 In Stock Add to cart
31-209 2” Wool Pad (PK5) $8.80 In Stock Add to cart
31-210 4” Wool Pad (PK5) $12.00 In Stock Add to cart
31-211 2” Towel Pad (PK5) $10.99 In Stock Add to cart
31-212 4” Towel Pad (PK5) $14.99 In Stock Add to cart
31-213 2” Sponge Pad (PK3) $11.99 In Stock Add to cart

Drill Press/Mortiser

DRILL PRESS & MORTISER
12-202 LED Gooseneck Worklight with Magnetic Base and Magnetic Clip $69.99 In Stock Add to cart
29-202 Morticing Attachment w/Chisels fits RIKON 13", 17", 20", 34" Drill Presses $149.99 In Stock Add to cart
29-912 1/2" Mortice Chisel/Bit $19.99 In Stock Add to cart
29-913 3/8"Mortice Chisel/Bit $19.99 In Stock Add to cart
29-914L 1/4"Mortice Chisel/Bit (Longer) $19.99 Out of Stock Add to cart
29-915L 5/16"Mortice Chisel/Bit (Longer) $19.99 In Stock Add to cart

Dust Collection

DUST COLLECTION
60-900 Filter Canister/Cartridge for 1HP Dust Collector $329.99 In Stock Add to cart
60-901 Plastic Dust Bag for 60-100 1HP Dust Collector 5 pack $29.99 In Stock Add to cart
60-902 Plastic Dust Bag for 60-150, 60-200 1.5, 2HP Dust Collectors (5 Pack) $34.99 In Stock Add to cart
60-903 Replacement Cloth Dust Filter Bag (2 Micron) $21.99 In Stock Add to cart
60-905 Filter Canister/Cartridge for 1.5HP, 2HP Dust Collectors $329.99 In Stock Add to cart
60-918 Cloth Filter (5 micron) and Plastic Dust Bag Set for 1HP Collectors (2 Pack) $34.99 In Stock Add to cart
60-928 Cloth Filter (5 micron) and Plastic Dust Bag Set for 1.5, 2HP Collectors (2 Pack) $44.99 In Stock Add to cart
61-912F Standard 5 Micron Outer Filter for 62-1100 $25.99 In Stock Add to cart
63-900 Mobility Kit for 63-100, 63-110 $32.99 In Stock Add to cart
63-915 Filter Cartridge for 63-100, 63-110 $24.99 In Stock Add to cart
63-920 Paper Filter Bags for 63-100, 63-110 (5 Pack) $24.99 In Stock Add to cart
P60-200-22 Impeller - Sturdy Metal Design with 7 Rear Facing Blades
(Dia. 11-3/4”, Shaft Dia. 20mm, Height 3-1/4”, Shaft Hub Length 1-1/4”)
California Proposition 65 Warning
$119.99 In Stock Add to cart

Lathe

LATHE CHUCKS/JAWS/AND ACCESSORIES
71-103 RIKON's Z3 4-Jaw Chuck Kit 71-103 is the perfect wood lathe accessory for turning bowls, platters, spindles and decorative pieces. This 4-Jaw, self-centering chuck is CNC precision-made from high tensile steel with a geared jaw system for easy operation and excellent project holding power. Improved design of the chuck sliders gives added strength for attaching a variety of available jaw set accessories. Meticulously machined chuck body and internal gearing system operates flawlessly for reliable closing and opening operation with the included special Chuck Key.
  • The Z3 Chuck has a direct threaded 1" x 8TPI body for immediate mounting on lathes. Kit includes a 50mm (2") Jaw Set, Wood Screw RH, Chuck Key, T-handle T20 Wrench, 3mm Hex Wrench and Instructions. For use on lathes with a 10" to 14" swing.
  • Z3 Chuck is 3-1/2" (88mm) diameter with pre-machined 1" x 8TPI body. At only about 2.6 lbs., this light weight and small chuck diameter is ideal for use on smaller lathes. Extra-fine finish with etched safety icons and serial number for registering under the industry's best 10 year warranty!
  • 50mm (2") Jaw Set accessory that is included with the Z3 Chuck is one of the most popular, standard jaw styles for holding bowl or spindle/tenon projects. Over 20 other sizes and shapes of RIKON jaw sets are available for use with the Z3 chuck to hold bowls, platters, pen making blanks or other turnings on your lathe.
  • The Wood Screw is held by the chuck to mount small bowl or other light weight projects for turning. Sharp threads cut into wood for best holding power. Requires a pilot hole bored in the wood before installation.
  • Made exclusively for RIKON
$139.99 Out of Stock Add to cart
71-104 RIKON's Z4 4-Jaw Chuck Kit 71-104 is the perfect wood lathe accessory for turning bowls, platters, spindles and decorative pieces. This larger, heavy-duty 4-Jaw, self-centering chuck is CNC precision-made from high tensile steel with a geared jaw system for easy operation and excellent project holding power. Improved design of the chuck sliders gives added strength for attaching a variety of available jaw set accessories. Meticulously machined chuck body and internal gearing system operates flawlessly for reliable closing and opening operation with the included special Chuck Key.
  • The Z4 Chuck has a direct threaded 1-1/4" x 8TPI body for immediate mounting on lathes. Kit includes a 50mm (2") Jaw Set, Wood Screw RH, Chuck Key, T-handle T20 Wrench, 3mm Hex Wrench and Instructions. For use on larger lathes with swings 14" and above.
  • The Z4 Chuck is 3-7/8" (98.5mm) diameter with pre-machined 1-1/4" x 8TPI body. At about 3.8 lbs., this robust weight and larger chuck diameter is best for use on larger size lathes that turn heavier wood projects which can damage smaller sized lathes. Chuck has an extra-fine finish with etched safety icons and serial number for registering under the industry's best 10 year warranty!
  • 50mm (2") Jaw Set accessory that is included with the Z4 Chuck is one of the most popular, standard jaw styles for holding bowl or spindle/tenon projects. Over 20 other sizes and shapes of RIKON jaw sets are available for use with the Z4 chuck to hold bowls, platters, pen making blanks or other turnings on your lathe.
  • The Wood Screw is held by the chuck to mount small bowl or other light weight projects for turning. Sharp threads cut into wood for best holding power. Requires a pilot hole bored in the wood before installation.
  • Made exclusively for RIKON
$179.99 In Stock Add to cart
71-105 RIKON's Z3 4-Jaw Chuck Kit 71-105 is the perfect wood lathe accessory for turning bowls, platters, spindles and decorative pieces. This 4-Jaw, self-centering chuck is CNC precision-made from high tensile steel with a geared jaw system for easy operation and excellent project holding power.
  • Improved design of the chuck sliders gives added strength for attaching a variety of available jaw set accessories. Meticulously machined chuck body and internal gearing system operates flawlessly for reliable closing and opening operation with the included special Chuck Key.
  • This Z3 Chuck requires your choice of appropriately sized Threaded Insert adapter (sold separately) to be installed into the rear of the chuck to mount the chuck on your lathe.
  • Kit includes a 50mm (2") Jaw Set, Wood Screw RH, Chuck Key, T-handle T20 Wrench, 3mm Hex Wrench and Instructions.
  • For use on lathes with a 10" to 14" swing.  Z3 Chuck is 3-1/2" (88mm) diameter and with your selected Threaded Insert (sold separately), it weighs at only about 2.9 lbs.. This light weight and small chuck diameter is ideal for use on smaller lathes. Extra-fine finish with etched safety icons and serial number for registering under the industry's best 10 year warranty!
  • 50mm (2") Jaw Set accessory that is included with the Z3 Chuck is one of the most popular, standard jaw styles for holding bowl or spindle/tenon projects. Over 20 other sizes and shapes of RIKON jaw sets are available for use with the Z3 chuck to hold bowls, platters, pen making blanks or other turnings on your lathe.
  • The Wood Screw is held by the chuck to mount small bowl or other light weight projects for turning. Sharp threads cut into wood for best holding power. Requires a pilot hole bored in the wood before installation.
  • The 70-105 Z3 Chuck requires a Threaded Insert adapter before it can be mounted on a lathe. Sold separately, RIKON offers four different insert thread options for the Z3 chuck: 71-120 is threaded for M33x3.5 ISO RH lathe spindles; 71-121 has 1"x8 TPI UNC RH threads; 71-122 has 1-1/4"x8 TPI UNS RH threads; and 71-123 has M30x3.5 RH threads.
  • Made exclusively for RIKON
$139.99 Out of Stock Add to cart
71-106 RIKON's Z4 4-Jaw Chuck Kit 71-106 is the perfect wood lathe accessory for turning bowls, platters, spindles and decorative pieces. This larger, heavy-duty 4-Jaw, self-centering chuck is CNC precision-made from high tensile steel with a geared jaw system for easy operation and excellent project holding power. Improved design of the chuck sliders gives added strength for attaching a variety of available jaw set accessories. Meticulously machined chuck body and internal gearing system operates flawlessly for reliable closing and opening operation with the included special Chuck Key.
  • This Z4 Chuck requires your choice of appropriately sized Threaded Insert adapter (sold separately) to be installed into the rear of the chuck to mount the chuck on your lathe. Kit includes a 50mm (2") Jaw Set, Wood Screw RH, Chuck Key, T-handle T20 Wrench, 3mm Hex Wrench and Instructions. For use on larger lathes with swings 14" and above.
  • The Z4 Chuck is 3-7/8" (98.5mm) diameter and with your selected Threaded Insert (sold separately), it weighs only about 4 lbs. This robust weight and larger chuck diameter is best for use on larger size lathes that turn heavier wood projects which can damage smaller sized lathes. Chuck has an extra-fine finish with etched safety icons and serial number for registering under the industry's best 10 year warranty!
  • 50mm (2") Jaw Set accessory that is included with the Z4 Chuck is one of the most popular, standard jaw styles for holding bowl or spindle/tenon projects. Over 20 other sizes and shapes of RIKON jaw sets are available for use with the Z4 chuck to hold bowls, platters, pen making blanks or other turnings on your lathe.
  • The Wood Screw is held by the chuck to mount small bowl or other light weight projects for turning. Sharp threads cut into wood for best holding power. Requires a pilot hole bored in the wood before installation.
  • The 70-106 Z4 Chuck requires a Threaded Insert adapter before it can be mounted on a lathe. Sold separately, RIKON offers four different insert thread options for the Z4 chuck: 71-120 is threaded for M33x3.5 ISO RH lathe spindles; 71-121 has 1"x8 TPI UNC RH threads; 71-122 has 1-1/4"x8 TPI UNS RH threads; and 71-123 has M30x3.5 RH threads.
  • Made exclusively for RIKON
$179.99 Out of Stock Add to cart
71-120 Chuck Insert M33 x 3.5 ISO RH $24.99 Out of Stock Add to cart
71-121 Chuck Insert 1" x 8 TPI UNC RH $24.99 Out of Stock Add to cart
71-122 Chuck Insert 1-1/4" x 8 TPI UNS RH $24.99 Out of Stock Add to cart
71-123 Chuck Insert M30 x 3.5RH $24.99 Out of Stock Add to cart
71-124 Chuck Insert 5/8" Plain Bore $24.99 Out of Stock Add to cart
71-125 Chuck Insert 3/4" x 16 TPI  RH $24.99 Out of Stock Add to cart
71-200 20mm (0.78") Mini Jaws $39.99 Out of Stock Add to cart
71-201 25mm (1") Mini Jaws $59.99 Out of Stock Add to cart
71-202 28mm (1.1") Mini Step Jaws $49.99 Out of Stock Add to cart
71-203 35mm (1.22") Spigot Jaws $59.99 Out of Stock Add to cart
71-204 50mm (2") Standard Jaws $59.99 Out of Stock Add to cart
71-205 53mm (2.08") Step Jaws $74.99 Out of Stock Add to cart
71-206 70mm (2.75") Standard Jaws $49.99 Out of Stock Add to cart
71-207 75mm (3") Power Grip Jaws $89.99 Out of Stock Add to cart
71-208 45mm (1.8") Spigot Jaws $79.99 Out of Stock Add to cart
71-209 130mm (5") Dovetail Jaws $74.99 Out of Stock Add to cart
71-210 35mm (1.4") Standard Jaws $49.99 Out of Stock Add to cart
71-211 75mm (3") Heavy Bowl and Gripper Jaws $74.99 Out of Stock Add to cart
71-212 75mm (3") Long Nose Jaws $74.99 Out of Stock Add to cart
71-213 17mm (0.7") Pin Jaws with 9mm Bore $59.99 Out of Stock Add to cart
71-214 100mm (4") Dovetail and Deep Gripper Jaws $64.99 Out of Stock Add to cart
71-215 31mm (1.22") Mini Spigot Jaws with 13mm Bore $49.99 Out of Stock Add to cart
71-216 Pen Jaws $44.99 Out of Stock Add to cart
71-217 Plastic Soft Jaws $24.99 Out of Stock Add to cart
71-218 254mm (10") Cole Jaws $69.99 Out of Stock Add to cart
71-219 203mm (8") Mini Cole Jaws $74.99 Out of Stock Add to cart
71-220 305mm (12") Large Cole Jaws $99.99 Out of Stock Add to cart
71-300 50mm (2") Faceplate Ring fits 50mm Jaws $39.99 Out of Stock Add to cart
71-301 100mm (4") Faceplate Ring fits 100mm Jaws $54.99 Out of Stock Add to cart
71-302 130mm (5") Faceplate Ring fits 130mm Jaws $79.99 Out of Stock Add to cart
71-303 Z3 Chuck 1"x 8 TPI Direct Thread $109.99 Out of Stock Add to cart
71-304 Z3 Chuck Insert Type $109.99 Out of Stock Add to cart
71-305 Z3 Chuck Key $14.99 Out of Stock Add to cart
71-315 Star Screw T20 M6x10 pack of 8 $7.99 Out of Stock Add to cart
71-316 Standard Wood Screw RH $24.99 Out of Stock Add to cart
71-317 Standard Wood Screw LH $24.99 Out of Stock Add to cart
71-320 Z4 Chuck 1-1/4"x 8 TPI Direct Thread $119.99 Out of Stock Add to cart
71-321 Z4 Chuck Insert Type $119.99 Out of Stock Add to cart
71-324 Z4 Chuck Key $14.99 Out of Stock Add to cart
71-325 Rubber Stopper Fastening Kit for Cole Jaws - 8PC $9.99 In Stock Add to cart
71-330 Z3 Chuck Key with Sliding Handle $14.99 In Stock Add to cart
LATHE ACCESSORIES
12-202 LED Gooseneck Worklight with Magnetic Base and Magnetic Clip $69.99 In Stock Add to cart
30-991 5/8" Drill Chuck and Arbor with MT2 Taper $49.99 In Stock Add to cart
70-800 70-800 4-Piece Turning Tool Set with Carbide Insert Cutters $249.99 In Stock Add to cart
70-802 6″ Extension Handle only $39.99 Out of Stock Add to cart
70-803 Counterweight only $14.99 In Stock Add to cart
70-804 Side Handle only for 70-800 Turning System $19.99 In Stock Add to cart
70-805 Shaft only for 70-800 Turning System $49.99 Out of Stock Add to cart
70-80512 12" Hollowing Shaft, for 70-800 Woodturning System $69.99 In Stock Add to cart
70-806 Pan Head Screw M4x 9mm T20 for 70-800 3.2mm Cutters $1.99 In Stock Add to cart
70-807 Pan Head Screw M4x 10mm T20 for 70-800 5mm Cutters $1.99 In Stock Add to cart
70-900B Mini Lathe Extension Bed for 70-100 Blue $169.99 In Stock Add to cart
70-901 Bed Extension for 70-220VSR MIDI Lathe $279.99 In Stock Add to cart
70-902 $139.99 In Stock Add to cart
70-903 13-1/2” Bed Extension for 70-150VSR, 70-1420VSR, 70-220VSR $69.99 In Stock Add to cart
70-904 Bed Extension 24" for 70-150VSR MIDI Lathe $199.99 In Stock Add to cart
70-906 Bed Extension for 70-105 Mini Lathe $99.99 In Stock Add to cart
70-907 Lathe Bed Gap Insert for 70-3040 $199.99 In Stock Add to cart
70-908 70-9083: 16" Bed Extension for 70-1824 $199.99 In Stock Add to cart
70-9083 Combo Kit Including: 70-908 16” BED EXTENSION For 70-1824 70-959 TOOL REST HEIGHT EXTENSION – Raises tool rests 4″ higher when working on larger swing capacity lathes. Has 1″ post and 1″ receiving hole for securing your tool rests with its lever handle. 70-960 Tool Rest Extension – Increases the reach of tool rests for turning surfaces not possible with standard tool rests. Has 1″ post and hole, with 7-1/2″ reach. *Lifestyle shot Banjo and Tools Rest not included   $249.99 In Stock Add to cart
70-912 12" Tool Rest 1 inch Post  $49.99 Out of Stock Add to cart
70-913 Lathe Stand Extension for 70-910, 70-920 $129.99 In Stock Add to cart
70-914 4" Tool Rest 1" Post  $19.99 Out of Stock Add to cart
70-9158 5/8" x 1" Tool Rest Bushing
California Proposition 65 Warning
$12.99 Out of Stock Add to cart
70-916 6" Tool Rest 1 inch Post  $29.99 In Stock Add to cart
70-918 8" Tool Rest 1 inch Post
California Proposition 65 Warning
$36.99 Out of Stock Add to cart
70-920 Universal Stand for Mini and MIDI Lathes $199.99 In Stock Add to cart
70-924 4" Tool Rest 5/8" Post $16.99 In Stock Add to cart
70-926 6" Tool Rest 5/8" Post $22.99 In Stock Add to cart
70-928 8" Tool Rest 5/8" Post (Same as P70-100-45)
California Proposition 65 Warning
$32.99 Out of Stock Add to cart
70-933 3" Face Plate 1 x 8 TPI (Same as P70-100-3)
California Proposition 65 Warning
$16.99 Out of Stock Add to cart
70-934 3-3/8" Face Plate  $19.99 In Stock Add to cart
70-935 70-220VSR tailstock 3-1/2”
California Proposition 65 Warning
$129.99 Out of Stock Add to cart
70-936 6" Face Plate 1 x 8 TPI $25.99 In Stock Add to cart
70-937 6" Face Plate 1 1/4" x  8 TPI $39.99 In Stock Add to cart
70-940 Badger Spur Center $69.99 In Stock Add to cart
70-943 Spur Center MT2(Black) (Same as P70-100-2) $14.99 In Stock Add to cart
70-945 Live Center MT2 (Black) (Same as P70-100-55) $19.99 Out of Stock Add to cart
70-948 Center Point(Black) (Same as P70-100-1) $5.99 Out of Stock Add to cart
70-959 Tool Rest Height Extension $29.99 In Stock Add to cart
70-960 Tool Rest Extension Knuckle $49.99 In Stock Add to cart
70-965 PRO TOOL REST POSTS ONLY (INCLUDES WASHER) 4-5/16″ (110 mm) Long x 1″ (25.4 mm) diameter $12.99 In Stock Add to cart
70-966 70-966 PRO TOOL REST POSTS ONLY (INCLUDES WASHER) 5-1/8″ (130 mm) Long x 1″ (25.4 mm) diameter $14.99 In Stock Add to cart
70-967 70-967 PRO TOOL REST POSTS ONLY (INCLUDES WASHER) 3-3/4″ (95 mm) Long x 1″ (25.4 mm) diameter $9.99 In Stock Add to cart
70-968 70-968 PRO TOOL REST POSTS ONLY (INCLUDES WASHER) 2-3/4″ (70 mm) Long x 5/8″ (15.9 mm) diameter $9.99 In Stock Add to cart
70-969 85mm (3-3/8") x 1" Post only for PRO tool rests $9.99 In Stock Add to cart
70-970 1″ (25.4mm) diameter Spring Washer for PRO tool rests $3.99 In Stock Add to cart
70-975 4” Top Only PRO Tool Rest $24.99 In Stock Add to cart
70-976 6” Top Only PRO Tool Rest $29.99 In Stock Add to cart
70-977 8” Top Only PRO Tool Rest $34.99 In Stock Add to cart
70-978 12” Top Only PRO Tool Rest $39.99 In Stock Add to cart
70-988 Drive Belt 630mm
California Proposition 65 Warning
$11.99 In Stock Add to cart
70-990 Nylon Washer 1-3/8 x 1-3/4 $5.99 In Stock Add to cart
70-992 Nylon Washer 1-3/64 x 1-5/8 $1.99 In Stock Add to cart
70-994 Drive Belt for 70-300, 70-305 $19.99 In Stock Add to cart
70-995 Drive Belt for 70-100 $17.99 In Stock Add to cart
70-996 Drive Belt for 70-050, 70-050VS $21.99 In Stock Add to cart
70-997 Drive Belt for 70-220VSR $19.99 In Stock Add to cart
70-998 Drive Belt for 70-500 $31.99 In Stock Add to cart
70-999 Drive Belt for 70-425, 70-450 $24.99 Out of Stock Add to cart
99-202 Height Gauge & Caliper $29.99 In Stock Add to cart
P70-105-24 Drive Belt for 70-105 $11.99 Out of Stock Add to cart
TURNING TOOL SET
70-800 70-800 4-Piece Turning Tool Set with Carbide Insert Cutters $249.99 In Stock Add to cart
70-801 16″ Handle only for 70-800 Turning Set $99.99 In Stock Add to cart
70-802 6″ Extension Handle only $39.99 Out of Stock Add to cart
70-803 Counterweight only $14.99 In Stock Add to cart
70-804 Side Handle only for 70-800 Turning System $19.99 In Stock Add to cart
70-805 Shaft only for 70-800 Turning System $49.99 Out of Stock Add to cart
70-806 Pan Head Screw M4x 9mm T20 for 70-800 3.2mm Cutters $1.99 In Stock Add to cart
70-807 Pan Head Screw M4x 10mm T20 for 70-800 5mm Cutters $1.99 In Stock Add to cart
70-840 Set of 3 traditional style Bowl Gouges for use with RIKON's 70-800 Woodturning System. Made with M2 High Speed Steel that is noted for resisting high heat and retaining sharp edges. This means you get longer times turning before having to re-sharpen a dull cutting edge.
  • Set of 3 Bowl Gouges includes 3/8" (10mm), 1/2" (13mm), and 5/8" (16mm) diameter tools.
  • Made of M2 High Speed Steel
  • Special 14mm diameter shaft ends fit into RIKON's 70-801 16" Handle's collet chuck for use.
  • Gouges are factory ground and require final sharpening before use.
$179.99 In Stock Add to cart
70-850 Set of 3 traditional style Spindle Gouges for use with RIKON's 70-800 Woodturning System. Made with M2 High Speed Steel that is noted for resisting high heat and retaining sharp edges. This means you get longer times turning before having to re-sharpen a dull cutting edge.
  • Set of 3 Spindle Gouges includes 1/4" (7mm), 3/8" (10mm), and 1/2" (13mm) diameter tools.
  • Made of M2 High Speed Steel
  • Special 14mm diameter shaft ends fit into RIKON's 70-801 16" Handle's collet chuck for use.
  • Gouges are factory ground and require final sharpening before use.
$149.99 In Stock Add to cart
TURNING TOOL CUTTERS
70-800 70-800 4-Piece Turning Tool Set with Carbide Insert Cutters $249.99 In Stock Add to cart
70-801 16″ Handle only for 70-800 Turning Set $99.99 In Stock Add to cart
70-80512 12" Hollowing Shaft, for 70-800 Woodturning System $69.99 In Stock Add to cart
70-810 Round Carbide Insert Cutter only for 70-800 Turning Set $12.99 Out of Stock Add to cart
70-8105 Round Carbide Insert Cutter 14mm only PK5  for 70-800 Turning Set $48.00 In Stock Add to cart
70-8105NR Round Negative Rake Carbide Insert Cutter 14mm only PK5 for 70-800 Turning Set $44.00 In Stock Add to cart
70-810NR Negative Rake Round Carbide Insert Cutter only for 70-800 Turning System $14.99 Out of Stock Add to cart
70-811 Square Carbide Insert Cutter only for 70-800 Turning Set $12.99 Out of Stock Add to cart
70-8115 Square Carbide Insert Cutter 13mm only PK5 for 70-800 Turning Set $54.99 In Stock Add to cart
70-8115NR Square Negative Rake Carbide Insert Cutter 13mm only PK5 for 70-800 Turning Set $59.99 In Stock Add to cart
70-811NR Negative Rake Square Carbide Insert Cutter only for 70-800 Turning System $14.99 In Stock Add to cart
70-812 Diamond Carbide Insert Cutter only for 70-800 Turning Set $12.99 In Stock Add to cart
70-8125 Diamond Carbide Insert Cutter only PK5 for 70-800 Turning Set $54.99 In Stock Add to cart
70-8125NR Diamond Negative Rake Carbide Insert Cutter only PK5 for 70-800 Turning Set $59.99 In Stock Add to cart
70-812NR Negative Rake Diamond Carbide Insert Cutter only for 70-800 Turning System $14.99 In Stock Add to cart
70-813 Detailing 3/16R Carbide Insert Cutter only for 70-800 Turning Set $16.99 In Stock Add to cart
70-814 R2 Square Carbide Insert Cutter only for 70-800 Turning Set $12.99 In Stock Add to cart
70-8145 R2 Square Carbide Insert Cutter 14mm only PK5 for 70-800 Turning Set $54.99 In Stock Add to cart
70-8145NR (5 Pack) R2 Square Negative Rake Carbide Insert Cutter 14mm only PK5 for 70-800 Turning Set $59.99 In Stock Add to cart
70-814NR Negative Rake R2 Square Carbide Cutter for 70-800 Turning System $14.99 In Stock Add to cart
70-815 Semi-Circle 20mm Carbide Insert Cutter only for 70-800 Turning Set $26.99 In Stock Add to cart
70-816 Fingernail Carbide Insert Cutter only for 70-800 Turning Set $34.99 In Stock Add to cart
70-817 Paisley LEFT Carbide Insert Cutter only for 70-800 Turning Set $34.99 In Stock Add to cart
70-818 Paisley RIGHT Carbide Insert Cutter only for 70-800 Turning Set $34.99 In Stock Add to cart
70-819 Detail Diamond  Insert Cutter, Carbide, for 70-800 Woodturning Tool $14.99 In Stock Add to cart
70-819NR Detail Diamond  Negative Rake Insert Cutter, Carbide, for 70-800 Woodturning Tool $16.99 In Stock Add to cart
70-841 3/8" Bowl Gouge Blade only for 70-800 Turning Set $69.99 In Stock Add to cart
70-842 1/2" Bowl Gouge Blade only for 70-800 Turning Set $74.99 In Stock Add to cart
70-843 5/8" Bowl Gouge Blade only for 70-800 Turning Set $89.99 In Stock Add to cart
70-851 1/4" Spindle Gouge Blade only for 70-800 Turning Set $44.99 In Stock Add to cart
70-852 3/8" Spindle Gouge Blade only for 70-800 Turning Set $59.99 In Stock Add to cart
70-853 1/2" Spindle Gouge Blade only for 70-800 Turning Set $64.99 In Stock Add to cart
70-8999 Assorted Carbide Insert Cutters PK5 for 70-800 Turning Set (2 70-810, 811, 1 70-812) $54.99 In Stock Add to cart

Mobility Kits

MOBILITY KITS
13-321 Mobility Kit for 10-321 $99.99 In Stock Add to cart
13-324 Mobility Kit Baseplate Adapter for 10-324 and 10-324TG* *13-324 Mobility Kit Baseplate Adapter is required to use 13-326 Mobility Kit with 10-324 and10-324TG bandsaws. $39.99 Out of Stock Add to cart
13-326

Mobility Kit w/Foot Pedal for 10-324*, 10-324TG*, 10-325, 10-326

*13-324 Mobility Kit Baseplate Adapter is required to use 13-326 Mobility Kit with 10-324 and10-324TG bandsaws.

 
$149.99 Out of Stock Add to cart
13-345 Mobility Kit for 10-341, 342, 345, 346, 347, 350, 351, 353, 370 $149.99 In Stock Add to cart
13-913 Stand for 10" Bandsaw 10-305 $88.00 In Stock Add to cart
23-901 Flexible/Expandable Roller Stand 200 lb Capacity $299.99 In Stock Add to cart
25-410 Metal Stand for 25-130, 25-130H, 25-131, 25-131H $99.99 In Stock Add to cart
25-905 Mobility Kit for 25-210(H) Planer/Jointer $99.99 Out of Stock Add to cart
52-910 28" Stand; top 22-1/2" x 10-1/2", base 33" x 21" $129.99 In Stock Add to cart
63-900 Mobility Kit for 63-100, 63-110 $32.99 In Stock Add to cart
70-920 Universal Stand for Mini and MIDI Lathes $199.99 In Stock Add to cart

Planers/Jointer

PLANER & JOINTER
23-901 Flexible/Expandable Roller Stand 200 lb Capacity $299.99 In Stock Add to cart
23-959 Mobility Kit for 20-106H & 20-108H Jointers and 23-150H Planer $99.99 In Stock Add to cart
25-410 Metal Stand for 25-130, 25-130H, 25-131, 25-131H $99.99 In Stock Add to cart
25-498 Replacement T25 Screws for 25-130H Pack Of 10 $9.99 In Stock Add to cart
25-499 HSS 2-Edge Inserts for 25-130H, 25-131H Planers & 20-600H, 20-800H Jointers 10 PK $59.99 In Stock Add to cart
25-499C Carbide 2-Edge Inserts for 25-130H, 25-131H Planers & 20-600H, 20-800H Jointer 10 PK $99.99 Out of Stock Add to cart
25-593 Replacement T25 Screws for 25-130H, 25-131H Planers & 20-600H Jointer 10 PK $9.99 In Stock Add to cart
25-594 Mounting Screws for Helical Inserts Flat Head T25 PK 10 $9.99 In Stock Add to cart
25-599 Carbide 4-Edge Helical Cutter Inserts 15mm x 15mm x 2.5mm (10 - Pack) $89.99 In Stock Add to cart
25-699

Carbide 4-Edge Helical Cutter Inserts 14mm x 14mm x 2mm (10 - Pack)

$89.99 In Stock Add to cart
25-905 Mobility Kit for 25-210(H) Planer/Jointer $99.99 Out of Stock Add to cart
C20-910 10" Replacements Knives 3pk for 25-010 $54.99 Out of Stock Add to cart
C20-912 12" Replacements Knives 3pk for 25-200 $84.99 Out of Stock Add to cart
C20-915 15″ Replacement HSS Knives for 23-150 (3 Pack) 15-5/32″ x 1″ x 1/8″ $59.99 Out of Stock Add to cart

Replacement Key Switches

REPLACEMENT SWITCH KEYS
CLSM Lock Switch Mustard
California Proposition 65 Warning
$1.99 In Stock Add to cart
CLSR Switch Key Red
California Proposition 65 Warning
$1.99 In Stock Add to cart
CLSY Lock Switch Yellow
California Proposition 65 Warning
$1.99 In Stock Add to cart

Sanding

SANDING BELTS
50-2036Z 2" x 72" 36 Grit Sanding Belt - Zirconia Alumina $8.99 In Stock Add to cart
50-2060Z 2" x 72" 60 Grit Sanding Belt - Zirconia Alumina $7.99 In Stock Add to cart
50-2080Z 2" x 72" 80 Grit Sanding Belt - Zirconia Alumina $6.99 In Stock Add to cart
50-3080 1"X42" Belt 80 Grit (PK5)
California Proposition 65 Warning
$12.99 In Stock Add to cart
50-3120 1"X42" Belt 120 Grit (PK5)
California Proposition 65 Warning
$12.99 In Stock Add to cart
50-3150 1"X42" Belt 150 Grit (PK5)
California Proposition 65 Warning
$12.99 In Stock Add to cart
50-3180 1"X42" Belt 180 Grit (PK5)
California Proposition 65 Warning
$12.99 In Stock Add to cart
50-3220 1"X42" Belt 240 Grit (PK5)
California Proposition 65 Warning
$12.99 In Stock Add to cart
50-3320 1"X42" Belt 320 Grit (PK5)
California Proposition 65 Warning
$12.99 In Stock Add to cart
50-3999 1"X42" Belt Asst Grit (PK10)
California Proposition 65 Warning
$19.99 In Stock Add to cart
50-4080 4" x 36"Sanding Belt 80 grit (PK2)
California Proposition 65 Warning
$12.99 In Stock Add to cart
50-4120 4" x 36" Sanding Belt 120 grit (PK2)
California Proposition 65 Warning
$12.99 In Stock Add to cart
50-4150 4" x 36" Sanding Belt 150 grit (PK2
California Proposition 65 Warning
$12.99 In Stock Add to cart
50-4180 4" x 36"Sanding Belt 180 grit (PK2)
California Proposition 65 Warning
$12.99 In Stock Add to cart
50-4220 4" x 36" Sanding Belt 240 grit (PK2)
California Proposition 65 Warning
$12.99 In Stock Add to cart
50-4999 4" x 36" Sanding Belt Asst (2ea 80,150,240 grit) (PK6)
California Proposition 65 Warning
$39.99 In Stock Add to cart
50-6080 6" x 48"Sanding Belt 80 grit (PK2)
California Proposition 65 Warning
$19.99 In Stock Add to cart
50-6120 6" x 48" Sanding Belt 120 grit (PK2)
California Proposition 65 Warning
$19.99 In Stock Add to cart
50-6150 6" x 48" Sanding Belt 150 grit (PK2)
California Proposition 65 Warning
$19.99 In Stock Add to cart
50-6180 6" x 48"Sanding Belt 180 grit (PK2)
California Proposition 65 Warning
$19.99 Out of Stock Add to cart
50-6220 6" x 48" Sanding Belt 240 grit (PK2)
California Proposition 65 Warning
$19.99 In Stock Add to cart
50-6999 6" x 48" Sanding Belt Asst (2 ea 80,150,240 grit) (PK6)
California Proposition 65 Warning
$39.99 In Stock Add to cart
50-9080 1" x 30" Belt 80 Grit (Pk 10)
California Proposition 65 Warning
$14.99 In Stock Add to cart
50-9120 1" x 30" Belt 120 Grit (Pk 10)
California Proposition 65 Warning
$14.99 In Stock Add to cart
50-9150 1" x 30" Belt 150 Grit (Pk 10)
California Proposition 65 Warning
$14.99 In Stock Add to cart
50-9180 1" x 30" Belt 180 Grit (Pk 10)
California Proposition 65 Warning
$14.99 In Stock Add to cart
50-9220 1" x 30" Belt 240 Grit (Pk 10)
California Proposition 65 Warning
$14.99 In Stock Add to cart
50-9999 1" x 30" Belt Asst Grit 2ea 80,120,150,180, & 240 (Pk 10)
California Proposition 65 Warning
$14.99 In Stock Add to cart
SANDING DISCS
50-10060 10" Disc 60 Grit PSA (PK2)
California Proposition 65 Warning
$11.99 In Stock Add to cart
50-10080 10" Disc 80 Grit PSA (PK2)
California Proposition 65 Warning
$11.99 In Stock Add to cart
50-10120 10" Disc 120 Grit PSA (PK2)
California Proposition 65 Warning
$11.99 In Stock Add to cart
50-10180 10" Disc 180 Grit PSA (PK2)
California Proposition 65 Warning
$11.99 In Stock Add to cart
50-10220 10" Disc 240 Grit PSA (PK2)
California Proposition 65 Warning
$11.99 In Stock Add to cart
50-10999 10" Disc Asst (2 ea 80,120,240) PK6
California Proposition 65 Warning
$21.99 In Stock Add to cart
50-12060 12" Disc 60 Grit PSA (PK2)
California Proposition 65 Warning
$14.99 In Stock Add to cart
50-12080 12" Disc 80 Grit PSA (PK2)
California Proposition 65 Warning
$14.99 In Stock Add to cart
50-12120 12" Disc 120 Grit PSA (PK2)
California Proposition 65 Warning
$14.99 In Stock Add to cart
50-12180 12" Disc 180 Grit PSA (PK2)
California Proposition 65 Warning
$14.99 In Stock Add to cart
50-12220 12" Disc 240 Grit PSA (PK2)
California Proposition 65 Warning
$14.99 In Stock Add to cart
50-12999 12" Disc Asst (2 ea 80,120,240) PK6
California Proposition 65 Warning
$29.99 In Stock Add to cart
50-5080 5" Disc 80 Grit PSA (PK 5)
California Proposition 65 Warning
$8.99 In Stock Add to cart
50-5120 5" Disc 120 Grit PSA (PK 5)
California Proposition 65 Warning
$8.99 In Stock Add to cart
50-5150 5" Disc 150 Grit PSA (PK 5)
California Proposition 65 Warning
$8.99 In Stock Add to cart
50-5180 5" Disc 180 Grit PSA (PK 5)
California Proposition 65 Warning
$8.99 In Stock Add to cart
50-5220 5" Disc 240 Grit PSA (PK 5)
California Proposition 65 Warning
$8.99 In Stock Add to cart
50-5999 5" Disc Asst Grit PSA (PK 10)
California Proposition 65 Warning
$12.99 In Stock Add to cart
50-6080D 6" Disc 80 Grit PSA (PK 2)..
California Proposition 65 Warning
$9.99 In Stock Add to cart
50-6120D 6" Disc 120 Grit PSA (PK 2)..
California Proposition 65 Warning
$9.99 In Stock Add to cart
50-6150D 6" Disc 150 Grit PSA (PK 2)..
California Proposition 65 Warning
$9.99 In Stock Add to cart
50-6180D 6" Disc 180 Grit PSA (PK 2)..
California Proposition 65 Warning
$9.99 In Stock Add to cart
50-6220D 6" Disc 240 Grit PSA (PK 2)
California Proposition 65 Warning
$9.99 In Stock Add to cart
50-6999D 6" Disc Asst Grit PSA (2ea 80,150,240 Grit) (PK6)
California Proposition 65 Warning
$16.99 In Stock Add to cart
50-8060 8" Disc 60 Grit PSA (PK5)
California Proposition 65 Warning
$12.99 In Stock Add to cart
50-8080 8" Disc 80 Grit PSA (PK5)
California Proposition 65 Warning
$12.99 In Stock Add to cart
50-8120 8" Disc 120 Grit PSA (PK5)
California Proposition 65 Warning
$12.99 In Stock Add to cart
50-8180 8" Disc 180 Grit PSA (PK5)
California Proposition 65 Warning
$12.99 In Stock Add to cart
50-8220 8" Disc 240 Grit PSA (PK5)
California Proposition 65 Warning
$12.99 In Stock Add to cart
50-8999 8" Disc Asst Grit PSA (PK10)
California Proposition 65 Warning
$19.99 In Stock Add to cart
SANDING DRUMS/ SLEEVES
50-3001 1" Spindle Sanding Drum Assembly
California Proposition 65 Warning
$19.99 In Stock Add to cart
50-3002 2" Spindle Sanding Drum Assembly
California Proposition 65 Warning
$24.99 In Stock Add to cart
50-3003 3" Spindle Sanding Drum Assembly
California Proposition 65 Warning
$39.99 In Stock Add to cart
50-3012 1/2" Spindle Sanding Drum Assembly
California Proposition 65 Warning
$14.99 In Stock Add to cart
50-3034 3/4" Spindle Sanding Drum Assembly
California Proposition 65 Warning
$16.99 In Stock Add to cart
50-3112 1 1/2" Spindle Sanding Drum Assembly
California Proposition 65 Warning
$22.99 In Stock Add to cart
50-45060 Spindle Sanding Sleeves 60 Grit, Pack of 5 ( 1 each, 1/2", 3/4, 1", 1 1/2", and 2")
California Proposition 65 Warning
$11.99 In Stock Add to cart
50-45100 Spindle Sanding Sleeves 100 Grit, Pack of 5 ( 1 each, 1/2", 3/4, 1", 1 1/2", and 2")
California Proposition 65 Warning
$11.99 In Stock Add to cart
50-45150 Spindle Sanding Sleeves 150 Grit, Pack of 5 ( 1 each, 1/2", 3/4, 1", 1 1/2", and 2")
California Proposition 65 Warning
$11.99 In Stock Add to cart
50-45303 Spindle Sanding Sleeves 3inch, Pack of 3 (1ea 60,100 & 150 grit)
California Proposition 65 Warning
$11.99 In Stock Add to cart

Table Saw/Scroll Saw

TABLE SAW/ SCROLL SAW
10-9123 Flex Shaft Attachment for 10-600VS $24.99 In Stock Add to cart
10-9124 64 PC Accessory Kit for 10-600VS $34.99 In Stock Add to cart
13-299 Dado Insert for 10-201 $49.99 In Stock Add to cart
13-500 Dado Insert for 10-205 10" Contractors Saw $29.99 In Stock Add to cart
13-600 Zero Clearance Insert for 10" Portable Table Saw 11-600S $39.99 In Stock Add to cart
C10-100 Safety Push Stick $6.99 In Stock Add to cart
P10-600VS-26 Replacement Bulb 120V/10W $3.99 In Stock Add to cart
P10-600VS-96 Pin-Less Blade Holder $6.99 In Stock Add to cart

Tool Storage

Tool Storage
99-462 Model 99-462. Heavy Duty Woodworker’s Backpack $50.00 In Stock Add to cart
99-500 Turning Tool Roll $29.99 In Stock Add to cart

Work Light

WORK LIGHTS
12-202 LED Gooseneck Worklight with Magnetic Base and Magnetic Clip $69.99 In Stock Add to cart