Manuals
Download manual (English)Download manual (Spanish)Download manual (French)
Model 10-326: 14″ Deluxe Bandsaw Parts
Model 10-326: 14″ Deluxe Bandsaw Parts
Parts List
View diagram
| P10-325-105 | Blade Tracking Handle (Same as P10-326-23D) California Proposition 65 Warning |
$2.99 | In Stock | Add to cart |
| P10-326-10A | Hinge - Mfg# 1-JMBS1404010400 California Proposition 65 Warning |
$2.99 | In Stock | Add to cart |
| P10-326-10B | Washer - Mfg# 1-WSH8GB96B California Proposition 65 Warning |
$0.49 | In Stock | Add to cart |
| P10-326-10C | Hex socket screw M6x16 - Mfg# 1-M6X16GB70Z California Proposition 65 Warning |
$0.49 | Out of Stock | Add to cart |
| P10-326-10D | Sliding rail - Mfg# 1-JL28030010 California Proposition 65 Warning |
$8.08 | In Stock | Add to cart |
| P10-326-10E | Hex socket screw M6x8 - Mfg# 1-M6X8GB80B California Proposition 65 Warning |
$0.49 | In Stock | Add to cart |
| P10-326-10F | Locking handle - Mfg# 1-JXBS2201061000A-001S California Proposition 65 Warning | $9.99 | In Stock | Add to cart |
| P10-326-10G | Handlebar - Mfg# 1-JL26010006-001S California Proposition 65 Warning |
$1.99 | In Stock | Add to cart |
| P10-326-11A | Hex socket screw M4x16 - Mfg# 1-M4X16GB70D3B California Proposition 65 Warning |
$0.49 | In Stock | Add to cart |
| P10-326-11B | Spring washer - Mfg# 1-WSH8GB93B California Proposition 65 Warning |
$0.49 | In Stock | Add to cart |
| P10-326-11C | Hinged door - Mfg# 1-JMBS1401052000-114X California Proposition 65 Warning |
$18.52 | In Stock | Add to cart |
| P10-326-11D | Upper wheel shaft - Mfg# 1-JL28030004 California Proposition 65 Warning |
$2.96 | In Stock | Add to cart |
| P10-326-11E | Motor pulley - Mfg# 1-JL20070001 California Proposition 65 Warning |
$9.99 | In Stock | Add to cart |
| P10-326-11F | Sliding block - Mfg# 1-JMBS1403060005 California Proposition 65 Warning |
$4.12 | In Stock | Add to cart |
| P10-326-11G | Right side panel - Mfg# 1-JL28050006A-076U California Proposition 65 Warning |
$24.80 | In Stock | Add to cart |
| P10-326-12A | Clear window - Mfg# 1-JL26010001 California Proposition 65 Warning |
$1.56 | In Stock | Add to cart |
| P10-326-12B | Hex socket cap screw M8X25 - Mfg# 1-M8X25GB70B California Proposition 65 Warning |
$0.49 | In Stock | Add to cart |
| P10-326-12C | Carriage bolt M5x12 - Mfg# 1-M5X12GB70B California Proposition 65 Warning |
$0.49 | Out of Stock | Add to cart |
| P10-326-12D | Spring - Mfg# 1-JL27030011A California Proposition 65 Warning |
$5.40 | Out of Stock | Add to cart |
| P10-326-12F | Front guide rail - Mfg# 1-JMBS1403060006 California Proposition 65 Warning | $24.16 | In Stock | Add to cart |
| P10-326-12G | Plate - Mfg# 1-JL28050004-076U California Proposition 65 Warning |
$15.20 | In Stock | Add to cart |
| P10-326-13A | Lower bandwheel cover - Mfg# 1-JMBS1401010003-076U California Proposition 65 Warning |
$17.99 | In Stock | Add to cart |
| P10-326-13B | Hex bolt M10X25 - Mfg# 1-M10X25GB5783B California Proposition 65 Warning |
$0.49 | Out of Stock | Add to cart |
| P10-326-13C | Washer - Mfg# 1-WSH5GB97D1B California Proposition 65 Warning |
$0.49 | Out of Stock | Add to cart |
| P10-326-13D | Block - Mfg# 1-JMBS1404040001 California Proposition 65 Warning |
$2.36 | In Stock | Add to cart |
| P10-326-13E | Lower bandwheel - Mfg# 1-JL28023001-001L California Proposition 65 Warning |
$73.99 | Out of Stock | Add to cart |
| P10-326-13F | Connecting rod - Mfg# 1-JXBS2001060003 California Proposition 65 Warning |
$1.84 | In Stock | Add to cart |
| P10-326-13G | Beam - Mfg# 1-JL28050003A-076U California Proposition 65 Warning |
$6.40 | In Stock | Add to cart |
| P10-326-14A | Nylon nut M6-1.0 - Mfg# 1-M6GB889Z California Proposition 65 Warning |
$0.49 | Out of Stock | Add to cart |
| P10-326-14B | Flat washer M12 - Mfg# 1-WSH12GB97D1B California Proposition 65 Warning |
$0.49 | Out of Stock | Add to cart |
| P10-326-14C | Locking handle - Mfg# 1-JMBS1403050004-001S California Proposition 65 Warning |
$0.52 | In Stock | Add to cart |
| P10-326-14D | Hex. socket screw M3x16 - Mfg# 1-M3X16GB70D2B California Proposition 65 Warning |
$0.49 | In Stock | Add to cart |
| P10-326-14F | Hex nut M10 - Mfg# 1-M10GB6170Z California Proposition 65 Warning |
$0.49 | In Stock | Add to cart |
| P10-326-14G | Hex bolt with flange M8X20 - Mfg# 1-M8X20GB5789Z California Proposition 65 Warning |
$0.49 | In Stock | Add to cart |
| P10-326-15A | Bushing - Mfg# 1-JL26010007 California Proposition 65 Warning |
$0.49 | In Stock | Add to cart |
| P10-326-15B | Hex self-locking nut M12 - Mfg# 1-M12GB889B California Proposition 65 Warning |
$0.49 | In Stock | Add to cart |
| P10-326-15C | Clear window - Mfg# 1-JMBS1404050001 California Proposition 65 Warning |
$0.49 | In Stock | Add to cart |
| P10-326-15D | Hex. Nut M3 - Mfg# 1-M3GB6170B California Proposition 65 Warning |
$0.49 | Out of Stock | Add to cart |
| P10-326-15E | Lower bandwheel shaft - Mfg# 1-JL28020002A California Proposition 65 Warning |
$4.04 | Out of Stock | Add to cart |
| P10-326-15F | Re-saw bar - Mfg# 1-JMBS1403061001 California Proposition 65 Warning |
$6.68 | In Stock | Add to cart |
| P10-326-15G | Base board - Mfg# 1-JL28050005B-076U California Proposition 65 Warning |
$49.99 | Out of Stock | Add to cart |
| P10-326-16A | Carriage bolt M6x20 - Mfg# 1-M6X20GB70D1Z California Proposition 65 Warning |
$0.49 | Out of Stock | Add to cart |
| P10-326-16B | Set screw M6X12 - Mfg# 1-M6X12GB77B California Proposition 65 Warning |
$0.49 | Out of Stock | Add to cart |
| P10-326-16C | Hex socket screw M5x8 - Mfg# 1-M5X8GB819B California Proposition 65 Warning |
$0.49 | Out of Stock | Add to cart |
| P10-326-16D | Thrust bearing - Mfg# 1-BRG51104GB301 California Proposition 65 Warning |
$2.60 | In Stock | Add to cart |
| P10-326-16E | Nut - Mfg# 1-JL20020004 California Proposition 65 Warning |
$0.56 | Out of Stock | Add to cart |
| P10-326-16F | Screw - Mfg# 1-JL26061003 California Proposition 65 Warning |
$0.49 | In Stock | Add to cart |
| P10-326-17A | Screw M5x10 - Mfg# 1-M5X10GB818Z California Proposition 65 Warning |
$0.49 | Out of Stock | Add to cart |
| P10-326-17B | P10-326-17B Lower Table Support – MFG# 1-JMBS1403030005 | $39.80 | In Stock | Add to cart |
| P10-326-17C | Long clamp handle - Mfg# 1-JMBS1801052002-001S California Proposition 65 Warning |
$0.96 | In Stock | Add to cart |
| P10-326-17D | Quick release handle - Mfg# 1-JL28033000 California Proposition 65 Warning |
$7.96 | In Stock | Add to cart |
| P10-326-17E | Retaining ring 17 - Mfg# 1-CLP17GB894D1B California Proposition 65 Warning |
$0.49 | In Stock | Add to cart |
| P10-326-17F | Bolt - Mfg# 1-JMBS1403061002 California Proposition 65 Warning |
$1.56 | In Stock | Add to cart |
| P10-326-18A | Washer - Mfg# 1-WSH5GB97D1Z California Proposition 65 Warning |
$0.49 | Out of Stock | Add to cart |
| P10-326-18B | Flat washer M10 - Mfg# 1-WSH10GB97D1B California Proposition 65 Warning |
$0.49 | In Stock | Add to cart |
| P10-326-18C | Fixed block - Mfg# 1-JMBS1403014007 California Proposition 65 Warning |
$0.49 | In Stock | Add to cart |
| P10-326-18D | Quick release rod - Mfg# 1-1904011 California Proposition 65 Warning |
$1.12 | In Stock | Add to cart |
| P10-326-18E | Retaining ring 40 - Mfg# 1-CLP40GB893D1B California Proposition 65 Warning |
$1.99 | In Stock | Add to cart |
| P10-326-18F | Rip fence - Mfg# 1-JMBS1403060002 California Proposition 65 Warning |
$69.99 | In Stock | Add to cart |
| P10-326-19A | Pointer - Mfg# 1-JL27010004-114X California Proposition 65 Warning |
$1.99 | Out of Stock | Add to cart |
| P10-326-19B | Spring washer - Mfg# 1-WSH10GB93B California Proposition 65 Warning |
$0.49 | Out of Stock | Add to cart |
| P10-326-19C | Spring - Mfg# 1-JMBS1403014005 California Proposition 65 Warning |
$0.49 | In Stock | Add to cart |
| P10-326-19D | Upper wheel shaft hinge - Mfg# 1-JL28030007 California Proposition 65 Warning |
$7.76 | In Stock | Add to cart |
| P10-326-19E | Bearing - Mfg# 1-BRG6203-2RSGB276 California Proposition 65 Warning | $6.99 | In Stock | Add to cart |
| P10-326-19F | Tube - Mfg# 1-JL93010018 California Proposition 65 Warning |
$0.56 | In Stock | Add to cart |
| P10-326-1A | Guide post cap - Mfg# 1-JL28010003-001S California Proposition 65 Warning |
$3.99 | In Stock | Add to cart |
| P10-326-1B | Set Screw - Mfg# 1-M6X4GB77B California Proposition 65 Warning |
$0.49 | In Stock | Add to cart |
| P10-326-1C | Locking handle - Mfg# 1-JL82240011-001S California Proposition 65 Warning |
$1.49 | In Stock | Add to cart |
| P10-326-1D | Blade tension handwheel - Mfg# 1-JL21025000A001S California Proposition 65 Warning |
$9.99 | In Stock | Add to cart |
| P10-326-1E | Blade - Mfg# 1-JL28020001C California Proposition 65 Warning |
$26.36 | Out of Stock | Add to cart |
| P10-326-1F | Adjust Handle - Mfg# 1-JMBS1403060009-001S California Proposition 65 Warning |
$7.56 | In Stock | Add to cart |
| P10-326-1G | Screw M6X16 - Mfg# 1-M6X16GB70Z California Proposition 65 Warning |
$0.49 | In Stock | Add to cart |
| P10-326-20A | Special Screw | $0.49 | In Stock | Add to cart |
| P10-326-20B | Pointer - Mfg# 1-JXBS2401031008A California Proposition 65 Warning |
$0.49 | In Stock | Add to cart |
| P10-326-20C | Upper guide - Mfg# 1-JMBS1401051001 California Proposition 65 Warning |
$19.60 | In Stock | Add to cart |
| P10-326-20D | Pin roll 5x35 - Mfg# 1-PIN5X35GB879D1B California Proposition 65 Warning |
$0.49 | Out of Stock | Add to cart |
| P10-326-20E | Tube - Mfg# 1-JL28020004 California Proposition 65 Warning |
$1.44 | In Stock | Add to cart |
| P10-326-20F | Lock handle - Mfg# 1-KTSB-1-A-M6X50 California Proposition 65 Warning |
$2.99 | In Stock | Add to cart |
| P10-326-21A | Fixed bolt - Mfg# 1-JL27010019 California Proposition 65 Warning |
$0.49 | In Stock | Add to cart |
| P10-326-21B | Cross recess pan head screw M3X8 - Mfg# 1-M3X8GB818Z California Proposition 65 Warning |
$0.49 | In Stock | Add to cart |
| P10-326-21C | Clamp handle - Mfg# 1-JMBS1403014006-001S California Proposition 65 Warning |
$0.92 | In Stock | Add to cart |
| P10-326-21D | Quick stopper - Mfg# 1-JL28030005 California Proposition 65 Warning |
$2.08 | In Stock | Add to cart |
| P10-326-21E | Washer - Mfg# 1-WSH8GB5287Z California Proposition 65 Warning |
$0.49 | Out of Stock | Add to cart |
| P10-326-21F | Roll pin - Mfg# 1-PIN6X26GB879B California Proposition 65 Warning |
$0.49 | In Stock | Add to cart |
| P10-326-22A | Pan head screw M4x10 - Mfg# 1-M4X10GB823B California Proposition 65 Warning |
$0.49 | In Stock | Add to cart |
| P10-326-22B | Gear shaft - Mfg# 1-JMBS1403030007 California Proposition 65 Warning |
$15.60 | In Stock | Add to cart |
| P10-326-22C | Bushing - Mfg# 1-JMBS1403014002 California Proposition 65 Warning |
$0.80 | In Stock | Add to cart |
| P10-326-22D | Wing nut - Mfg# 1-JL20010016A-001S California Proposition 65 Warning |
$0.56 | In Stock | Add to cart |
| P10-326-22E | Hex screw M8x16 - Mfg# 1-M8X16GB70Z California Proposition 65 Warning |
$0.49 | Out of Stock | Add to cart |
| P10-326-22F | Spring - Mfg# 1-JMBS1403060007 California Proposition 65 Warning |
$0.28 | In Stock | Add to cart |
| P10-326-23A | Switch - Mfg# 1-HY56-6 | $23.99 | Out of Stock | Add to cart |
| P10-326-23B | Crank handwheel - Mfg# 1-SGSL-D125-D12 California Proposition 65 Warning |
$7.92 | In Stock | Add to cart |
| P10-326-23C | Bearing 6202-2RS - Mfg# 1-BRG6202-2RSGB276 California Proposition 65 Warning |
$1.99 | In Stock | Add to cart |
| P10-326-23E | Spring washer - Mfg# 1-WSH8GB93Z California Proposition 65 Warning |
$0.49 | In Stock | Add to cart |
| P10-326-23F | Nylon Plate - Mfg# 1-JMBS1401060001 California Proposition 65 Warning |
$1.99 | In Stock | Add to cart |
| P10-326-24A | Screw M5x10 - Mfg# 1-M5X10GB70Z California Proposition 65 Warning |
$0.49 | Out of Stock | Add to cart |
| P10-326-24B | Small handle - Mfg# 1-JL26020014-001S California Proposition 65 Warning |
$1.44 | In Stock | Add to cart |
| P10-326-24C | Washer - Mfg# 1-WSH8GB97D1B California Proposition 65 Warning |
$0.49 | In Stock | Add to cart |
| P10-326-24D | Washer - Mfg# 1-JL28030009 California Proposition 65 Warning |
$0.49 | Out of Stock | Add to cart |
| P10-326-24E | Upper bandwheel - Mfg# 1-JL28022001-001L California Proposition 65 Warning |
$57.99 | In Stock | Add to cart |
| P10-326-25A | Nut M5 - Mfg# 1-M5GB6170Z California Proposition 65 Warning |
$0.49 | Out of Stock | Add to cart |
| P10-326-25B | Lock screw M6X12 - Mfg# 1-M6X12GB80B California Proposition 65 Warning |
$0.49 | In Stock | Add to cart |
| P10-326-25C | Guide shaft - Mfg# 1-JMBS1403014003 California Proposition 65 Warning |
$2.72 | In Stock | Add to cart |
| P10-326-25D | Spring washer - Mfg# 1-WSH6GB93B California Proposition 65 Warning |
$0.49 | Out of Stock | Add to cart |
| P10-326-25E | Handwheel handle - Mfg# 1-JL26020014B-001S California Proposition 65 Warning |
$1.88 | In Stock | Add to cart |
| P10-326-25F | Set Screw - Mfg# 1-M6X16GB77B California Proposition 65 Warning |
$0.49 | In Stock | Add to cart |
| P10-326-26A | Washer - Mfg# 1-WSH8GB97D1B California Proposition 65 Warning |
$0.49 | Out of Stock | Add to cart |
| P10-326-26B | Rack - Mfg# 1-JMBS1403030003 California Proposition 65 Warning |
$7.68 | In Stock | Add to cart |
| P10-326-26C | Spring - Mfg# 1-JMBS1403014008 California Proposition 65 Warning |
$0.56 | Out of Stock | Add to cart |
| P10-326-26D | Hex. Bolt M6X12 - Mfg# 1-M6X12GB5781B California Proposition 65 Warning |
$0.49 | Out of Stock | Add to cart |
| P10-326-26E | Crank handwheel - Mfg# 1-SGSL-D100-d10 California Proposition 65 Warning |
$6.99 | In Stock | Add to cart |
| P10-326-27A | Nylon nut M8 - Mfg# 1-M8GB889B California Proposition 65 Warning |
$0.49 | Out of Stock | Add to cart |
| P10-326-27B | Eccentric bushing - Mfg# 1-JMBS1403030008 California Proposition 65 Warning |
$1.56 | In Stock | Add to cart |
| P10-326-27C | Rear guide shaft - Mfg# 1-JMBS1403014004 California Proposition 65 Warning |
$3.12 | In Stock | Add to cart |
| P10-326-27E | Set screw M6x8 - Mfg# 1-M6X8GB77B California Proposition 65 Warning |
$0.49 | Out of Stock | Add to cart |
| P10-326-28A | Lower blade guard - Mfg# 1-JMBS1401010002-001S California Proposition 65 Warning |
$2.99 | In Stock | Add to cart |
| P10-326-28B | Screw M6X16 - Mfg# 1-M6X16GB70B California Proposition 65 Warning |
$0.49 | Out of Stock | Add to cart |
| P10-326-28C | Guide - Mfg# 1-JMBS1401051002 California Proposition 65 Warning |
$3.40 | In Stock | Add to cart |
| P10-326-28E | Set screw M5x8 - Mfg# 1-M5X8GB71Z California Proposition 65 Warning |
$0.49 | In Stock | Add to cart |
| P10-326-29A | Washer - Mfg# 1-WSH6GB97D1B California Proposition 65 Warning |
$0.49 | In Stock | Add to cart |
| P10-326-29B | Hex socket countersunk head screw M8X16 - Mfg# 1-M8X16GB70D3Z California Proposition 65 Warning |
$0.99 | Out of Stock | Add to cart |
| P10-326-29C | Hex socket end lock screw M6X12 - Mfg# 1-M6X12GB80B California Proposition 65 Warning |
$0.49 | In Stock | Add to cart |
| P10-326-29E | Set collar - Mfg# 1-CLP10GB884Z California Proposition 65 Warning |
$0.52 | In Stock | Add to cart |
| P10-326-2C | Hex. Bolt M6x16 - Mfg# 1-M6X16GB5783B California Proposition 65 Warning |
$0.49 | Out of Stock | Add to cart |
| P10-326-2D | Blade tensioner - Mfg# 1-JL28032000A California Proposition 65 Warning |
$11.99 | In Stock | Add to cart |
| P10-326-2E | Motor 1-3/4HP - Mfg# 2-YLH906134 California Proposition 65 Warning |
$299.99 | Out of Stock | Add to cart |
| P10-326-2EA | Start Capacitor 1-3/4HP 150uF | $9.99 | In Stock | Add to cart |
| P10-326-2EB | Run Capacitor 1-3/4HP 50uF | $9.99 | In Stock | Add to cart |
| P10-326-2EC | Motor Cover 1-3/4HP - Mfg# 2-YLH906134 Cover California Proposition 65 Warning |
$9.99 | In Stock | Add to cart |
| P10-326-2F | Locking Knob - Mfg# 1-JMBS1403060010-001S California Proposition 65 Warning |
$1.64 | In Stock | Add to cart |
| P10-326-2G | Bush - Mfg# 1-JL20010001A California Proposition 65 Warning |
$0.49 | In Stock | Add to cart |
| P10-326-30A | Bolt M6x12 - Mfg# 1-M6X12GB70D2B California Proposition 65 Warning |
$0.49 | In Stock | Add to cart |
| P10-326-30B | Rivet 2D5X5 - Mfg# 1-RVT2D5X5GB827C California Proposition 65 Warning |
$0.49 | Out of Stock | Add to cart |
| P10-326-30C | Upper guide support block - Mfg# 1-JMBS1401050001 California Proposition 65 Warning |
$9.99 | In Stock | Add to cart |
| P10-326-30E | Crank - Mfg# 1-JL28020003A California Proposition 65 Warning |
$4.68 | Out of Stock | Add to cart |
| P10-326-31A | Self-locking nut M6 - Mfg# 1-M6GB889Z California Proposition 65 Warning |
$0.49 | Out of Stock | Add to cart |
| P10-326-31B | Angle lable - Mfg# 1-JMBS1403030006 California Proposition 65 Warning |
$1.32 | In Stock | Add to cart |
| P10-326-31C | Clamp handle - Mfg# 1-JMBS1403050003-001S California Proposition 65 Warning |
$2.99 | In Stock | Add to cart |
| P10-326-32A | Brush - Mfg# 1-JL26010003 California Proposition 65 Warning |
$0.92 | In Stock | Add to cart |
| P10-326-32C | Screw M5X25 - Mfg# 1-M5X25GB70D1B California Proposition 65 Warning |
$0.49 | In Stock | Add to cart |
| P10-326-33A | Washer - Mfg# 1-WSH6GB96Z California Proposition 65 Warning |
$0.49 | Out of Stock | Add to cart |
| P10-326-33C | Guide post - Mfg# 1-JMBS1401050002 California Proposition 65 Warning |
$12.40 | In Stock | Add to cart |
| P10-326-34A | Hex. Bolt M6x25 - Mfg# 1-M6X25GB5783Z California Proposition 65 Warning |
$0.49 | Out of Stock | Add to cart |
| P10-326-34C | Pan head screw M5X8 - Mfg# 1-M5X8GB818B California Proposition 65 Warning |
$0.49 | Out of Stock | Add to cart |
| P10-326-35A | Dust port grille - Mfg# 1-JL20010019-001S California Proposition 65 Warning |
$1.32 | In Stock | Add to cart |
| P10-326-35C | Gear rack - Mfg# 1-1-JL28040001A California Proposition 65 Warning |
$5.40 | In Stock | Add to cart |
| P10-326-36A | Big washer - Mfg# 1-WSH6GB96B California Proposition 65 Warning |
$0.49 | Out of Stock | Add to cart |
| P10-326-36C | Scale - Mfg# 1-JMBS1401050003 California Proposition 65 Warning |
$1.68 | Out of Stock | Add to cart |
| P10-326-37A | Spring - Mfg# 1-JMBS1403014005 California Proposition 65 Warning |
$0.49 | Out of Stock | Add to cart |
| P10-326-37C | Hex socket end lock screw M6X12 - Mfg# 1-M6X12GB77B California Proposition 65 Warning |
$0.49 | In Stock | Add to cart |
| P10-326-38A | Locking handle - Mfg# 1-JMBS1403014006-001S California Proposition 65 Warning |
$0.99 | In Stock | Add to cart |
| P10-326-38C | Crank handwheel - Mfg# 1-SGSL-D100-d10 California Proposition 65 Warning |
$6.80 | In Stock | Add to cart |
| P10-326-39A | Upper bearing bush - Mfg# 1-JMBS1403014002 California Proposition 65 Warning |
$0.80 | In Stock | Add to cart |
| P10-326-39C | Handwheel handle - Mfg# 1-JL26020014B-001S California Proposition 65 Warning |
$1.88 | In Stock | Add to cart |
| P10-326-3A | Indicator adjustment plate - Mfg# 1-JL27010005 California Proposition 65 Warning |
$0.56 | In Stock | Add to cart |
| P10-326-3B | Table - Mfg# 1-JMBS1401030001-001L California Proposition 65 Warning |
$263.24 | Out of Stock | Add to cart |
| P10-326-3C | Washer - Mfg# 1-WSH6GB96B California Proposition 65 Warning |
$0.49 | Out of Stock | Add to cart |
| P10-326-3D | Special Hex, nut - Mfg# 1-JL28030003 California Proposition 65 Warning |
$0.64 | Out of Stock | Add to cart |
| P10-326-3E | Spring Washer - Mfg# 1-WSH6GB93Z California Proposition 65 Warning |
$0.49 | Out of Stock | Add to cart |
| P10-326-3F | Socket head cap screw M8X10 - Mfg# 1-M8X10GB80B California Proposition 65 Warning |
$0.49 | In Stock | Add to cart |
| P10-326-3G | Self-locking nut M6 - Mfg# 1-M6GB889Z California Proposition 65 Warning |
$0.49 | In Stock | Add to cart |
| P10-326-40A | Bearing - Mfg# 1-BRG6202-2RSGB276 California Proposition 65 Warning |
$2.99 | Out of Stock | Add to cart |
| P10-326-40C | Set collar - Mfg# 1-JL20010015 California Proposition 65 Warning |
$0.80 | Out of Stock | Add to cart |
| P10-326-41A | Washer - Mfg# 1-WSH8GB97D1B California Proposition 65 Warning |
$0.49 | Out of Stock | Add to cart |
| P10-326-41C | Set Screw - Mfg# 1-M5X8GB71B California Proposition 65 Warning |
$0.49 | In Stock | Add to cart |
| P10-326-42A | Guide shaft - Mfg# 1-JMBS1403014003 California Proposition 65 Warning |
$2.72 | In Stock | Add to cart |
| P10-326-42C | Bushing - Mfg# 1-JL27040003 California Proposition 65 Warning |
$1.16 | In Stock | Add to cart |
| P10-326-43A | Lower blade guide - Mfg# 1-JMBS1401013001 California Proposition 65 Warning |
$23.44 | In Stock | Add to cart |
| P10-326-43C | Worm cylinder - Mfg# 1-JL27040004 California Proposition 65 Warning |
$3.80 | In Stock | Add to cart |
| P10-326-44A | Spring - Mfg# 1-JMBS1403014008 California Proposition 65 Warning |
$0.56 | In Stock | Add to cart |
| P10-326-45A | Rear guide shaft - Mfg# 1-JMBS1403014004 California Proposition 65 Warning |
$3.12 | In Stock | Add to cart |
| P10-326-46A | Screw M8X12 - Mfg# 1-M8X12GB70B California Proposition 65 Warning |
$0.49 | In Stock | Add to cart |
| P10-326-47A | Big washer - Mfg# 1-WSH8GB96B California Proposition 65 Warning |
$0.49 | In Stock | Add to cart |
| P10-326-48A | Quick release rod - Mfg# 1-1904011 California Proposition 65 Warning |
$1.08 | In Stock | Add to cart |
| P10-326-49A | Socket head cap screw M8X8 - Mfg# 1-M8X8GB80B California Proposition 65 Warning |
$0.49 | Out of Stock | Add to cart |
| P10-326-4A | Push stick - Mfg# 1-JL81100003-146S California Proposition 65 Warning |
$3.99 | Out of Stock | Add to cart |
| P10-326-4A | Push stick (Same as P10-324-52A) California Proposition 65 Warning |
$3.99 | Out of Stock | Add to cart |
| P10-326-4B | Table Alignment Pin & Lanyard - Mfg# 1-JMBS1404030002 California Proposition 65 Warning |
$3.80 | Out of Stock | Add to cart |
| P10-326-4C | Guide bracket - Mfg# 1-JL27040006 California Proposition 65 Warning |
$10.92 | Out of Stock | Add to cart |
| P10-326-4D | Washer - Mfg# 1-WSH12GB97D1Z California Proposition 65 Warning |
$0.49 | Out of Stock | Add to cart |
| P10-326-4E | Hex. Bolt M6x16 - Mfg# 1-M6X16GB5783Z California Proposition 65 Warning |
$0.49 | Out of Stock | Add to cart |
| P10-326-4F | Cam - Mfg# 1-JMBS1403060004 California Proposition 65 Warning |
$4.56 | In Stock | Add to cart |
| P10-326-4G | Door assembly - Mfg# 1-JL28051000-076U California Proposition 65 Warning |
$27.80 | In Stock | Add to cart |
| P10-326-50A | Camshaft - Mfg# 1-JMBS1401012001 California Proposition 65 Warning |
$21.56 | In Stock | Add to cart |
| P10-326-51A | Cam - Mfg# 1-JMBS1403016004 California Proposition 65 Warning |
$2.44 | In Stock | Add to cart |
| P10-326-52A | Slide bracket - Mfg# 1-JMBS1403016003 California Proposition 65 Warning |
$13.28 | Out of Stock | Add to cart |
| P10-326-53A | Spacer - Mfg# 1-JMBS1403030004 California Proposition 65 Warning |
$2.08 | In Stock | Add to cart |
| P10-326-54A | Washer - Mfg# 1-WSH10GB849B California Proposition 65 Warning |
$0.49 | In Stock | Add to cart |
| P10-326-55A | Nut M10 - Mfg# 1-M10GB6172B California Proposition 65 Warning |
$0.49 | Out of Stock | Add to cart |
| P10-326-56A | Connecting plate - Mfg# 1-JMBS1401010001-117U California Proposition 65 Warning |
$0.49 | Out of Stock | Add to cart |
| P10-326-57A | Carriage bolt M5x12 - Mfg# 1-M5X12GB70B California Proposition 65 Warning |
$0.49 | Out of Stock | Add to cart |
| P10-326-58A | Washer - Mfg# 1-WSH5GB97D1B California Proposition 65 Warning |
$0.49 | Out of Stock | Add to cart |
| P10-326-59A | Set screw M6X10 - Mfg# 1-M6X10GB77B California Proposition 65 Warning |
$0.49 | Out of Stock | Add to cart |
| P10-326-5A | Hex nut M6 - Mfg# 1-M6GB6170B California Proposition 65 Warning |
$0.49 | In Stock | Add to cart |
| P10-326-5B | Washer - Mfg# 1-WSH4GB96Z California Proposition 65 Warning |
$0.49 | In Stock | Add to cart |
| P10-326-5C | Set Screw - Mfg# 1-M6X12GB77B California Proposition 65 Warning |
$0.49 | Out of Stock | Add to cart |
| P10-326-5D | Hex. socket screw M6x12 - Mfg# 1-M6X12GB70D1Z California Proposition 65 Warning |
$0.49 | Out of Stock | Add to cart |
| P10-326-5E | Sliding shaft - Mfg# 1-JL20014001 California Proposition 65 Warning |
$4.28 | In Stock | Add to cart |
| P10-326-5F | Flat washer - Mfg# 1-WSH10GB97D1Z California Proposition 65 Warning |
$0.49 | In Stock | Add to cart |
| P10-326-5G | Countersunk hex socket screw M6X50 - Mfg# 1-M6X50GB70D3Z California Proposition 65 Warning |
$0.60 | In Stock | Add to cart |
| P10-326-60A | Adjusting handle - Mfg# 1-KTSB-1-B-M6X50X10 California Proposition 65 Warning |
$2.28 | In Stock | Add to cart |
| P10-326-61A | Nut M10 - Mfg# 1-M10GB6170B California Proposition 65 Warning |
$0.49 | Out of Stock | Add to cart |
| P10-326-62A | Tapping screw - Mfg# 1-ST3D5X9D5GB845B California Proposition 65 Warning |
$0.49 | Out of Stock | Add to cart |
| P10-326-63A | Dust port - Mfg# 1-JL20010007-001S California Proposition 65 Warning |
$5.99 | In Stock | Add to cart |
| P10-326-64A | Nut M6 - Mfg# 1-M6GB6170Z California Proposition 65 Warning |
$0.49 | Out of Stock | Add to cart |
| P10-326-65A | Connecting plate - Mfg# 1-JMBS1401010004 California Proposition 65 Warning |
$2.21 | Out of Stock | Add to cart |
| P10-326-66A | Set screw M6X30 - Mfg# 1-M6X30GB77B California Proposition 65 Warning |
$0.49 | Out of Stock | Add to cart |
| P10-326-67A | Plastic pipe - Mfg# 1-JXBS2401010018 California Proposition 65 Warning |
$0.49 | Out of Stock | Add to cart |
| P10-326-68A | Nut M5X12 - Mfg# 1-M5X12GB70Z California Proposition 65 Warning |
$0.49 | Out of Stock | Add to cart |
| P10-326-69A | Fixed bolck - Mfg# 1-JL21010014 California Proposition 65 Warning |
$1.92 | Out of Stock | Add to cart |
| P10-326-6A | Hex bolt M6X30 - Mfg# 1-M6X30GB70D1B California Proposition 65 Warning |
$0.49 | In Stock | Add to cart |
| P10-326-6B | Pan head screw M4x10 - Mfg# 1-M4X10GB818Z California Proposition 65 Warning |
$0.49 | In Stock | Add to cart |
| P10-326-6C | Gear - Mfg# 1-1501006 California Proposition 65 Warning |
$2.20 | In Stock | Add to cart |
| P10-326-6D | Washer - Mfg# 1-WSH6GB5287Z California Proposition 65 Warning |
$0.49 | Out of Stock | Add to cart |
| P10-326-6E | Bearing - Mfg# 1-BRG6001-2RSGB276 California Proposition 65 Warning |
$2.99 | In Stock | Add to cart |
| P10-326-6F | Nut M10 - Mfg# 1-M10GB889Z California Proposition 65 Warning |
$0.49 | In Stock | Add to cart |
| P10-326-6G | Left side panel - Mfg# 1-JL28050002A-076U California Proposition 65 Warning |
$26.00 | In Stock | Add to cart |
| P10-326-70A | Stud shaft - Mfg# 1-JL26010015 California Proposition 65 Warning |
$0.49 | Out of Stock | Add to cart |
| P10-326-71A | Carriage bolt M6x20 - Mfg# 1-M6X20GB70D1Z California Proposition 65 Warning |
$0.49 | Out of Stock | Add to cart |
| P10-326-72A | Star knob - Mfg# 1-JL26010006-001S California Proposition 65 Warning |
$1.99 | In Stock | Add to cart |
| P10-326-73A | Nylon nut M6-1.0 - Mfg# 1-M6GB889Z California Proposition 65 Warning |
$0.49 | Out of Stock | Add to cart |
| P10-326-74A | Clear window - Mfg# 1-JMBS1404010001 California Proposition 65 Warning |
$0.72 | In Stock | Add to cart |
| P10-326-75A | Plug seat - Mfg# 1-DB-F-M California Proposition 65 Warning |
$1.32 | In Stock | Add to cart |
| P10-326-76A | Rubber cover - Mfg# 1-JL28010005-001S California Proposition 65 Warning |
$1.28 | Out of Stock | Add to cart |
| P10-326-77A | Pan head screw M5x10 - Mfg# 1-M5X10GB818B California Proposition 65 Warning |
$0.49 | Out of Stock | Add to cart |
| P10-326-78A | Tool holder - Mfg# 1-JL26090001 California Proposition 65 Warning |
$0.68 | In Stock | Add to cart |
| P10-326-79A | Strain relief plate - Mfg# 1-JL26010011-117U California Proposition 65 Warning |
$0.88 | Out of Stock | Add to cart |
| P10-326-7A | Hex. Nut M4 - Mfg# 1-JMBS1401010005 California Proposition 65 Warning |
$0.49 | In Stock | Add to cart |
| P10-326-7B | Hex. Nut M8 - Mfg# 1-M8GB6170Z California Proposition 65 Warning |
$0.49 | Out of Stock | Add to cart |
| P10-326-7C | Fixed bolt - Mfg# 1-JL26040006 California Proposition 65 Warning |
$1.40 | Out of Stock | Add to cart |
| P10-326-7D | Upper shaft - Mfg# 1-JL28030008 California Proposition 65 Warning |
$1.12 | In Stock | Add to cart |
| P10-326-7E | Retainer ring - Mfg# 1-CLP28GB893D1B California Proposition 65 Warning |
$0.49 | In Stock | Add to cart |
| P10-326-7F | Round handle - Mfg# 1-JMBS1403060003-001S California Proposition 65 Warning |
$4.00 | In Stock | Add to cart |
| P10-326-7G | Big washer - Mfg# 1-WSH8GB96Z California Proposition 65 Warning |
$0.49 | In Stock | Add to cart |
| P10-326-80A | Hex. socket screw M6x10 - Mfg# 1-M6X10GB70D2B California Proposition 65 Warning |
$0.49 | Out of Stock | Add to cart |
| P10-326-81A | Strain relief M20 - Mfg# 1-JL91046100 California Proposition 65 Warning |
$1.28 | Out of Stock | Add to cart |
| P10-326-82A | Hex. socket screw M8x25 - Mfg# 1-M8X25GB5783B California Proposition 65 Warning |
$0.49 | Out of Stock | Add to cart |
| P10-326-83A | Nut M8 - Mfg# 1-M8GB6170B California Proposition 65 Warning |
$0.49 | Out of Stock | Add to cart |
| P10-326-8A | Lock washer - Mfg# 1-WSH4GB862D2B California Proposition 65 Warning |
$0.49 | Out of Stock | Add to cart |
| P10-326-8B | Hex. Bolt M8x45 - Mfg# 1-M8X45GB5783Z California Proposition 65 Warning |
$0.49 | In Stock | Add to cart |
| P10-326-8C | Fixed plate - Mfg# 1-JL26040007 California Proposition 65 Warning |
$0.49 | In Stock | Add to cart |
| P10-326-8D | Slide bracket - Mfg# 1-JL28031000 California Proposition 65 Warning |
$16.99 | Out of Stock | Add to cart |
| P10-326-8E | Tension wheel - Mfg# 1-JL20014002A California Proposition 65 Warning |
$4.20 | In Stock | Add to cart |
| P10-326-8F | Big washer - Mfg# 1-WSH8GB96Z California Proposition 65 Warning |
$0.49 | In Stock | Add to cart |
| P10-326-8G | Back side panel - Mfg# 1-JL28050001A-076U California Proposition 65 Warning |
$23.20 | Out of Stock | Add to cart |
| P10-326-9A | Upper wheel cover - Mfg# 1-JMBS1404010200-076U California Proposition 65 Warning |
$17.16 | In Stock | Add to cart |
| P10-326-9B | Upper Table Trunnion – MFG# 1-JMBS1403030002 | $48.00 | In Stock | Add to cart |
| P10-326-9C | Guide Bracket Cover - Mfg# 1-JL27040002A California Proposition 65 Warning |
$1.00 | In Stock | Add to cart |
| P10-326-9D | Tube - Mfg# 1-JL28030001 California Proposition 65 Warning |
$0.88 | Out of Stock | Add to cart |
| P10-326-9E | Retaining spring - Mfg# 1-CLP12GB894D1B California Proposition 65 Warning |
$0.49 | In Stock | Add to cart |
| P10-326-9F | Rip fence carrier - Mfg# 1-JMBS1403060001-076U California Proposition 65 Warning | $39.99 | In Stock | Add to cart |
| P10-326-9G | Hex socket cap screw M6X20 - Mfg# 1-M6X20GB70D1Z California Proposition 65 Warning |
$0.49 | In Stock | Add to cart |
Accessories
Air Filtration
INNER FILTERS
| 61-905 | Inner Filter Bag (1 micron) for 62-1100 | $74.99 | In Stock | Add to cart |
| 62-902F | Inner Filter Bag 9-1/2"X16-1/2" X 3/4" Merv 12 for 62-400/450 | $34.99 | In Stock | Add to cart |
OUTER FILTERS
| 61-910C | Outer Charcoal Filter for 62-1100 | $74.99 | In Stock | Add to cart |
| 61-912F | Standard 5 Micron Outer Filter 12” x 24” x 1” for 62-1100 | $32.99 | In Stock | Add to cart |
| 62-901F | Outer Filter 9-1/2X16-1/2" X 2" SEP Pleated Filter Merv 8 for 62-400/450 | $26.99 | In Stock | Add to cart |
Bandsaw Blades
64.5 INCH - HORIZONTAL METAL CUTTING
| 19-6401 | 64-1/2" X 1/2" X 0.025 X 14 TPI Bi-Metal Reg Metal Cutting Blade | $49.99 | In Stock | Add to cart |
| 19-6402 | 64-1/2" X 1/2" X 0.025 X 18 TPI Bi-Metal Reg Metal Cutting Blade | $49.99 | In Stock | Add to cart |
70.5 INCH - WOODWORKING
| 19-7002 | 70-1/2" x 3/16" 025 10TPI Reg Blade California Proposition 65 Warning |
$29.99 | In Stock | Add to cart |
| 19-7003 | 70-1/2" x 1/4" 025 6 TPI Hook Blade California Proposition 65 Warning |
$29.99 | In Stock | Add to cart |
| 19-7004 | 70-1/2" x 3/8" 025 4 TPI Hook Blade California Proposition 65 Warning |
$29.99 | In Stock | Add to cart |
| 19-7005 | 70-1/2" x 1/2" 025 3 TPI Hook Blade California Proposition 65 Warning |
$29.99 | In Stock | Add to cart |
| 19-7006 | 70-1/2 x 1/8 x 018 x 8 TPI Hook Blade California Proposition 65 Warning |
$29.99 | In Stock | Add to cart |
| 19-7007 | 70-1/2 x 1/8 x 018 x 14 TPI Hook Blade California Proposition 65 Warning |
$29.99 | In Stock | Add to cart |
| 19-7008 | 70-1/2" x 5/16" Wide 0.016" Gauge 6 TPI Hook Style | $24.99 | In Stock | Add to cart |
70.5 INCH – NON FERROUS METAL
| 19-7010 | 70-1/2” 1/2” 0.025” 14 TPI Bi-Metal Reg Metal Cutting Blade | $59.99 | In Stock | Add to cart |
| 19-7011 | 19-7011 70-1/2” 1/2” 0.025” 18 TPI Bi-Metal Reg Metal Cutting Blade | $59.99 | In Stock | Add to cart |
| 19-7012 | 19-7012 70-1/2” 1/2” 0.025” 10/14 TPI Bi-Metal Reg Metal Cutting Blade |
$59.99 | In Stock | Add to cart |
| 19-7013 | 19-7013 70-1/2” 1/2” 0.025” 14/18 TPI Bi-Metal Reg Metal Cutting Blade |
$59.99 | In Stock | Add to cart |
93.5 INCH – WOODWORKING
| 19-9310 | 93-1/2" x 3/16" 025 10 TPI Reg Blade California Proposition 65 Warning |
$34.99 | In Stock | Add to cart |
| 19-9311 | 93-1/2" x 3/8" 025 4 TPI Hook Blade California Proposition 65 Warning |
$34.99 | In Stock | Add to cart |
| 19-9312 | 93-1/2" x 1/2" 025 3 TPI Hook Blade California Proposition 65 Warning |
$34.99 | In Stock | Add to cart |
| 19-9313 | 93-1/2" x 5/8" 025 3 TPI Hook Blade California Proposition 65 Warning |
$34.99 | In Stock | Add to cart |
99.75 INCH – WOODWORKING
| 19-9910 | 99-3/4" x 1/4" 025 6 TPI Hook Blade California Proposition 65 Warning |
$39.99 | In Stock | Add to cart |
| 19-9911 | 99-3/4" x 3/8" 025 4 TPI Hook Blade California Proposition 65 Warning |
$39.99 | In Stock | Add to cart |
| 19-9912 | 99-3/4" x 1/2" 025 3 TPI Hook Blade California Proposition 65 Warning |
$39.99 | In Stock | Add to cart |
| 19-9913 | 99-3/4" x 5/8" 025 3 TPI Hook Blade California Proposition 65 Warning |
$39.99 | In Stock | Add to cart |
| 19-9914 | 99-3/4" x 3/4" 032 3 TPI Hook Blade California Proposition 65 Warning |
$39.99 | In Stock | Add to cart |
111 INCH – WOODWORKING
| 19-1100 | 111" x 1/4" 025 6 TPI Hook Blade California Proposition 65 Warning |
$34.99 | In Stock | Add to cart |
| 19-1101 | 111" x 3/16" 025 10 TPI Reg Blade California Proposition 65 Warning |
$34.99 | In Stock | Add to cart |
| 19-1102 | 111" x 3/8" 025 4 TPI Hook Blade California Proposition 65 Warning |
$34.99 | In Stock | Add to cart |
| 19-1103 | 111" x 1/2" 025 3 TPI Hook Blade California Proposition 65 Warning |
$34.99 | In Stock | Add to cart |
| 19-1105 | 111" x 5/8" 025 4 TPI Regular Blade California Proposition 65 Warning |
$39.99 | In Stock | Add to cart |
| 19-1106 | Resaw Pro Carbide Tipped Blade 19-1106 111" x 3/4” x .035” x 3 TPI The RIKON Carbide-Tipped PRO-CT bandsaw blade is ideal for all wood resawing; especially difficult exotic hardwoods such as Wenge, Bloodwood, Ebony, and others. Made in the USA. RIKON uses the newest grades of Tungsten Carbide for extended cutting life.
|
$149.99 | In Stock | Add to cart |
| 19-1108 |
|
$34.99 | In Stock | Add to cart |
| 19-1109 |
|
$44.99 | In Stock | Add to cart |
111 INCH - METAL
| 19-1108 |
|
$34.99 | In Stock | Add to cart |
| 19-1109 |
|
$44.99 | In Stock | Add to cart |
| 19-1511 | 111" x 1/2" x .025 x 14 TPI Reg. Bi-Metal Bandsaw Blade California Proposition 65 Warning |
$69.99 | In Stock | Add to cart |
| 19-1512 | 111" x 1/2" x .025 x 18 TPI Reg. Bi-Metal Bandsaw Blade California Proposition 65 Warning |
$69.99 | In Stock | Add to cart |
| 19-1513 | 111" x 3/4" x .035 x 8/12 TPI Vari. Bi-Metal Bandsaw Blade California Proposition 65 Warning |
$69.99 | In Stock | Add to cart |
| 19-1514 | 111" x 3/4" x .035 x 10/14 TPI Vari. Bi-Metal Bandsaw Blade California Proposition 65 Warning |
$79.99 | In Stock | Add to cart |
124 INCH - WOODWORKING
| 19-1210 | 124" x 1/4" 025 x 6TPI Hook Blade All-Pro California Proposition 65 Warning |
$39.99 | In Stock | Add to cart |
| 19-1211 | 124" x 3/8" 025 4TPI Hook Blade All-Pro California Proposition 65 Warning |
$39.99 | In Stock | Add to cart |
| 19-1212 | 124" x 1/2" x 025 3 TPI Hook Blade All-Pro California Proposition 65 Warning |
$44.99 | In Stock | Add to cart |
| 19-1213 | 124" x 5/8" 025 3 TPI Hook Blade All-Pro California Proposition 65 Warning |
$44.99 | In Stock | Add to cart |
| 19-1214 | 124" x 3/4" 032 3 TPI Hook Blade All-Pro California Proposition 65 Warning |
$44.99 | In Stock | Add to cart |
| 19-1215 | 124" x 1" 035 2 TPI Hook Blade All-Pro California Proposition 65 Warning |
$49.99 | In Stock | Add to cart |
142 INCH - WOODWORKING
| 19-1410 | 142" x 3/8" 025 4 TPI Hook Blade California Proposition 65 Warning |
$39.99 | In Stock | Add to cart |
| 19-1411 | 142" x 1/2" 025 3 TPI Hook Blade California Proposition 65 Warning |
$39.99 | In Stock | Add to cart |
| 19-1412 | 142" x 5/8" 025 3 TPI Hook Blade California Proposition 65 Warning |
$39.99 | In Stock | Add to cart |
| 19-1413 | 142" x 3/4" 032 3 TPI Hook Blade California Proposition 65 Warning |
$39.99 | Out of Stock | Add to cart |
142 INCH - METAL
| 19-1520 | 142 x 1/2 x 025 x 14 TPI Bi-Metal Reg Metal Cutting Blade California Proposition 65 Warning |
$79.99 | In Stock | Add to cart |
| 19-1521 | 142 x 1/2 x 025 x 18 TPI Bi-Metal Reg Metal Cutting Blade California Proposition 65 Warning |
$79.99 | In Stock | Add to cart |
| 19-1522 | 142 x 3/4 x 035 x 8/12TPI Var Metal Cutting Blade Bi-Metal California Proposition 65 Warning |
$79.99 | In Stock | Add to cart |
| 19-1523 | 142 x 3/4 x 035 x 10/14TPI Var Metal Cutting Blade Bi-Metal California Proposition 65 Warning |
$79.99 | In Stock | Add to cart |
153 INCH - WOODWORKING
| 19-1701 | 153" x 3/8" x .025 x 4TPI Hook Blade California Proposition 65 Warning |
$39.99 | In Stock | Add to cart |
| 19-1702 | 153" x 1/2" x .025 x 3TPI Hook Blade California Proposition 65 Warning |
$39.99 | In Stock | Add to cart |
| 19-1703 | 153" x 5/8" x .025 x 3TPI Hook Blade California Proposition 65 Warning |
$39.99 | In Stock | Add to cart |
| 19-1704 | 153" x 3/4" x .032 x 3TPI Hook Blade California Proposition 65 Warning |
$44.99 | In Stock | Add to cart |
| 19-1705 | 153" x 1" x .035 x 2TPI Hook Blade California Proposition 65 Warning |
$49.99 | In Stock | Add to cart |
162 INCH - WOODWORKING
| 19-1801 | 162" x 3/8" x .025 x 4TPI Hook Blade California Proposition 65 Warning |
$44.99 | In Stock | Add to cart |
| 19-1802 | 162" x 1/2" x .025 x 3TPI Hook Blade California Proposition 65 Warning |
$44.99 | In Stock | Add to cart |
| 19-1803 | 162" x 5/8" x .025 x 3TPI Hook Blade California Proposition 65 Warning |
$49.99 | In Stock | Add to cart |
| 19-1804 | 162" x 3/4" x .032 x 3TPI Hook Blade
California Proposition 65 Warning |
$49.99 | In Stock | Add to cart |
| 19-1805 | 162" x 1" x .035 x 2TPI Hook Blade .. California Proposition 65 Warning |
$54.99 | In Stock | Add to cart |
163 INCH – WOODWORKING
| 19-1601 | 163 x 3/8 x 025 x 4TPI Hook Wood Cutting Blade California Proposition 65 Warning |
$54.99 | In Stock | Add to cart |
| 19-1602 | 163 x 5/8 x 025 x 3TPI Hook Wood Cutting Blade California Proposition 65 Warning |
$54.99 | In Stock | Add to cart |
| 19-1603 | 163 x 3/4 x 032 x 3TPI Hook Wood Cutting Blade California Proposition 65 Warning |
$54.99 | In Stock | Add to cart |
| 19-1604 | 163 x 1 x 035 x 2TPI Hook Wood Cutting Blade California Proposition 65 Warning |
$64.99 | In Stock | Add to cart |
176 INCH - WOODWORKING
| 19-1901 | 176" x 3/8" x .025 x 4TPI Hook Bandsaw Blade California Proposition 65 Warning |
$54.99 | In Stock | Add to cart |
| 19-1902 | 176" x 1/2" x .025 x 3TPI Hook Bandsaw Blade California Proposition 65 Warning |
$54.99 | In Stock | Add to cart |
| 19-1903 | 176" x 5/8" x .025 x 3TPI Hook Bandsaw Blade California Proposition 65 Warning |
$64.99 | In Stock | Add to cart |
| 19-1904 | 176" x 3/4" x .032 x 3TPI Hook Bandsaw Blade California Proposition 65 Warning |
$64.99 | In Stock | Add to cart |
| 19-1905 | 176" x 1" x .035 x 2TPI Hook Bandsaw Blade California Proposition 65 Warning |
$69.99 | In Stock | Add to cart |
| 19-1906 | 176" x 1-1/4" x .035 x 1.3TPI Hook Bandsaw Blade California Proposition 65 Warning |
$74.99 | In Stock | Add to cart |
Bandsaw Accessories
BANDSAW TOOL-LESS GUIDE KIT
| 10-900 | Spring Loaded Tool-Less Blade Guide Retrofit Kit System fits 10-324/10-325 |
$179.99 | In Stock | Add to cart |
BANDSAW ACCESSORIES
| 10-900 | Spring Loaded Tool-Less Blade Guide Retrofit Kit System fits 10-324/10-325 |
$179.99 | In Stock | Add to cart |
| 12-202 | LED Gooseneck Worklight with Magnetic Base and Magnetic Clip | $69.99 | In Stock | Add to cart |
| 13-321 | Mobility Kit for 10-321 | Original price was: $99.99.$80.00Current price is: $80.00. | In Stock | Add to cart |
| 13-324 | Mobility Kit Baseplate Adapter for 10-324 and 10-324TG* *13-324 Mobility Kit Baseplate Adapter is required to use 13-326 Mobility Kit with 10-324 and10-324TG bandsaws. | $89.99 | In Stock | Add to cart |
| 13-326 | Mobility Kit w/Foot Pedal for 10-324*, 10-324TG*, 10-325, 10-326 *13-324 Mobility Kit Baseplate Adapter is required to use 13-326 Mobility Kit with 10-324 and10-324TG bandsaws. |
$119.99 | In Stock | Add to cart |
| 13-345 | Mobility Kit for 10-341, 342, 345, 346, 347, 350, 351, 353, 370 | $119.99 | In Stock | Add to cart |
| 13-912 | Miter Gauge for 3/4" x 3/8" (T- slot Tables Only) | $59.99 | In Stock | Add to cart |
| 13-913 | Stand for 10” Bandsaws, 10-305, 10-306, 10-3061 | $99.99 | In Stock | Add to cart |
| 13-920 | Miter Gauge for 10-305 & 10-306 | $34.99 | In Stock | Add to cart |
| 99-201 | Inclinometer with Laser | $39.99 | In Stock | Add to cart |
| 99-202 | Height Gauge & Caliper | Original price was: $29.99.$15.00Current price is: $15.00. | In Stock | Add to cart |
| C10-393 | Table Inserts for 10-305, 10-306 and 10-3061 PK 4 | $16.99 | Out of Stock | Add to cart |
BANDSAW DRIVE BELTS
| C10-987 | Drive Belt for 10-385 | $24.99 | In Stock | Add to cart |
| C10-988 | Multi-vee belt (Same as P10-342-10F) - Mfg# 1-5PJ1023GB16588 | $26.99 | In Stock | Add to cart |
| C10-989 | Multi-V Belt for 10-353 | $19.99 | In Stock | Add to cart |
| C10-990 | Drive Belt for 10-306 & 10-3061 | $16.99 | In Stock | Add to cart |
| C10-991 | Drive Belt for 10-300, 10-305 | $16.99 | In Stock | Add to cart |
| C10-992 | Drive Belt for 10-340, 10-345 | $26.99 | In Stock | Add to cart |
| C10-993 | Drive Belt for 10-350, 10-350BAL, 10-351 | $29.99 | In Stock | Add to cart |
| C10-994 | Drive Belt for 10-370 | $27.99 | In Stock | Add to cart |
| C10-995 | Drive Belt for RK14CS, 10-320, 10-321, 10-324, 10-325, 10-326 | $21.99 | In Stock | Add to cart |
| C10-996 | Drive Belt for 10-380 | $26.99 | In Stock | Add to cart |
| C10-998 | Drive Belt for 10-308 | $14.99 | In Stock | Add to cart |
| C10-999 | Drive Belt for 10-346, 10-347 | $26.99 | In Stock | Add to cart |
BANDSAW FENCES
| 10-920 | Quick-Adjust 6” Tall Rip Fence System for use with most RIKON Bandsaws | $269.99 | In Stock | Add to cart |
| 10-921 | 6” Tall Rip Fence Extrusion and Re-Saw Bar Set for 10-325 | $139.99 | In Stock | Add to cart |
| 10-924 | Flip Stop for 6” tall, extruded aluminum fences on RIKON’s 14”, 18” and 24” Bandsaws and 10-920, 10-921 Fence Systems | $24.99 | In Stock | Add to cart |
| 10-926 | Deluxe Rip Fence System for 10-305 and 10-310 | $69.99 | In Stock | Add to cart |
BANDSAW GUIDE BEARINGS
| C10-108 | Guide Bearings for 10-300, 10-305, 10-308 (6 Pack) California Proposition 65 Warning |
$24.99 | In Stock | Add to cart |
| C10-109 | Guide Bearings for 10-306, 10-3061 ,10-315, 10-320, 10-321, 10-324, 10-324TG, 10-325 (6 Pack)California Proposition 65 Warning | $26.99 | In Stock | Add to cart |
| C10-144 | Guide Bearings for 10-340, 10-341, 10-345, 10-370, 10-380 (10 Pack) California Proposition 65 Warning |
$48.99 | In Stock | Add to cart |
| C10-145 | Guide Bearings for 10-900 Bandsaw Retrofit Kit (6 Pack) California Proposition 65 Warning |
$32.99 | In Stock | Add to cart |
| C10-209 | Guide Bearings for 10-350, 350BAL, 10-351 (10 Pack) California Proposition 65 Warning |
$48.99 | In Stock | Add to cart |
| C10-326 | Guide Bearings 10 Pack for 10-326/10-353/10-342/10-347 | $49.99 | In Stock | Add to cart |
BANDSAW GUIDE KITS
| 10-900 | Spring Loaded Tool-Less Blade Guide Retrofit Kit System fits 10-324/10-325 |
$179.99 | In Stock | Add to cart |
BANDSAW MITER GAUGES
| 13-912 | Miter Gauge for 3/4" x 3/8" (T- slot Tables Only) | $59.99 | In Stock | Add to cart |
| 13-920 | Miter Gauge for 10-305 & 10-306 | $34.99 | In Stock | Add to cart |
BANDSAW TABLE INSERTS
| C10-372 | Table Insert for 10-300 10" Bandsaw | $10.99 | In Stock | Add to cart |
| C10-391 | Table Inserts (4 Pack) All Rikon 14" & 18" except 10-346 | $21.99 | In Stock | Add to cart |
| C10-392 | Zero Clearance Table Inserts (4 Pack) Fits all RIKON 14” & 18” Bandsaws except 10-346/10-347 | $21.99 | In Stock | Add to cart |
| C10-393 | Table Inserts for 10-305, 10-306 and 10-3061 PK 4 | $16.99 | Out of Stock | Add to cart |
| C10-394 | C10-394: Zero Clearance Table Inserts for 10-305, 10-306 & 10-3061 (Pack 4) | $16.99 | In Stock | Add to cart |
| C10-395 | Table Insert aluminum. All Rikon 14"& 18" Bandsaws except 10-346 | $16.99 | In Stock | Add to cart |
| C10-396 | Table Insert for 10-346, 10-347, & 10-385 (Square) | $13.99 | In Stock | Add to cart |
BANDSAW TIRES
| C10-405U | 10” Urethane Tire 10” x 1/2” x 1/8” (Lemon Yellow) The New RIKON Urethane tire series will outperform standard rubber tires with a lifespan of 5 to 1 in severe sawing applications. Urethane tires have a higher tear strength which is far superior to rubber. Temperature and humidity resistance prevents drying and cracking during saw storage in all-weather climates. The RIKON Urethane tire series is extruded from high quality tooling which means no seam! The seamless design coupled with its high flex properties will aid in reducing saw vibration. The lemon yellow color provides easy view of the blade for tracking. RIKON Urethane Tire Benefits: No seam for reduced saw vibration High tear strength Temperature resistance prevents cracking Greater flex-life than rubber Shore 85A hardness for durability Lemon Yellow color for easy blade viewing Sizing: | $21.99 | In Stock | Add to cart |
| C10-415 | 12" Rubber Wheel Tire for 10-315 | $14.99 | Out of Stock | Add to cart |
| C10-421 | 14" Rubber Wheel Tire for 10-320, 10-321, RK14CS | $24.99 | In Stock | Add to cart |
| C10-425U | 14" Yellow Urethane Tires
The New RIKON Urethane tire series will outperform standard rubber tires with a lifespan of 5 to 1 in severe sawing applications. Urethane tires have a higher tear strength which is far superior to rubber. Temperature and humidity resistance prevents drying and cracking during saw storage in all-weather climates.
The RIKON Urethane tire series is extruded from high quality tooling which means no seam! The seamless design coupled with its high flex properties will aid in reducing saw vibration. The lemon yellow color provides easy view of the blade for tracking.
RIKON Urethane Tire Benefits:
|
$24.99 | In Stock | Add to cart |
| C10-445 | 18" Rubber Wheel Tire for 10-340, 10-345, 10-370 | $26.99 | In Stock | Add to cart |
| C10-446 | 18" Rubber Wheel Tire for 10-341, 10-342, 10-346, 10-347 | $26.99 | In Stock | Add to cart |
| C10-480 | 22" Rubber Wheel Tire for 10-380 | $44.99 | In Stock | Add to cart |
No accessories found
Bench Grinders/Buffers/Sharpeners
BUFFING WHEELS
| C81-801 | 8" x 1/2" Buffing Wheel with 1" Arbor Hole, white cotton, spiral sewn | $24.99 | In Stock | Add to cart |
| C81-802 | 8" x 1/2" Buffing Wheel with 1" Arbor Hole, Yellow Linen, spiral sewn | $26.99 | In Stock | Add to cart |
| P81-600-3 | 6″ Spiral Sewn Cotton Replacement Buffing Wheel
|
$26.99 | In Stock | Add to cart |
| P81-608-3 | 8″ Spiral Sewn Cotton Replacement Buffing Wheel
|
$26.99 | In Stock | Add to cart |
CBN SHARPENING WHEELS
| 1-1/2" CBN Wheels With 1/4" Radius Edge | RIKON's PROseries 8" sharpening wheels features CBN (Cubic Boron Nitride) abrasives, one of the hardest materials besides diamond! Mounted on your grinder, these wheels will put razor sharp edges on your hardened steel tools - woodturning and carving gouges, chisels, plane blades and other cutting instruments. Each sharpening wheel is precision machined from solid aluminum, balanced, and bonded with fine CBN abrasives that are ideal for sharpening hardened heat-treated steel tools. CBN wheels cut quickly with minimum pressure, stay cool and never needs dressing or shaping. Wheels fit onto grinders with 5/8" shafts and work best on low-speed grinders operating below 2,000 RPMs. The 1-1/2” wide surface with 1/4” curved radius edges is available in 80, 180, 350 or 600 grit to offer woodworkers the full range of sharpening from the initial grinding/shaping stage to creating final razor-sharp edges on tools. Note that CBN wheels are not for use with soft carbon steel, aluminum or other soft metals which will ruin the abrasives and void the warranty. Stones are packed in cardboard boxes for safe storage and transporting. • 82-5080R RIKON PROseries 8" x 1.5" w/Radius 80 Grit CBN Sharpening Wheel, 5/8" arbor hole • 82-5180R RIKON PROseries 8" x 1.5" w/Radius 180 Grit CBN Sharpening Wheel, 5/8" arbor hole • 82-5350R RIKON PROseries 8" x 1.5" w/Radius 350 Grit CBN Sharpening Wheel, 5/8" arbor hole • 82-5600R RIKON PROseries 8" x 1.5" w/Radius 600 Grit CBN Sharpening Wheel, 5/8" arbor hole | $179.99 | In Stock | Add to cart |
| 1-1/2" CBN Wheels With Radius Edge 1" Sides | RIKON PROseries sharpening wheels features CBN (Cubic Boron Nitride) abrasives, one of the hardest materials besides diamond! Mounted on your grinder, these wheels will put razor sharp edges on your hardened steel tools – woodturning and carving gouges, chisels, plane blades and other cutting instruments. Each sharpening wheel is precision machined from solid aluminum, balanced, and bonded with fine CBN abrasives that are ideal for sharpening hardened heat-treated steel tools. CBN wheels cut quickly with minimum pressure, stay cool and never needs dressing or shaping. Wheels fit onto grinders with 5/8” shafts and work best on low-speed grinders operating below 2,000 RPMs. The 10” Hone Stone fits sharpening systems with 12mm shafts. | $199.99 | In Stock | Add to cart |
| 1-1/2" CBN Wheels With Square Edge 1" Sides | RIKON PROseries sharpening wheels features CBN (Cubic Boron Nitride) abrasives, one of the hardest materials besides diamond! Mounted on your grinder, these wheels will put razor sharp edges on your hardened steel tools – woodturning and carving gouges, chisels, plane blades and other cutting instruments. Each sharpening wheel is precision machined from solid aluminum, balanced, and bonded with fine CBN abrasives that are ideal for sharpening hardened heat-treated steel tools. CBN wheels cut quickly with minimum pressure, stay cool and never needs dressing or shaping. Wheels fit onto grinders with 5/8” shafts and work best on low-speed grinders operating below 2,000 RPMs. | $199.99 | In Stock | Add to cart |
| 1-1/4" CBN Wheels With 1/4" Radius Edge 1" Sides | RIKON PROseries sharpening wheels features CBN (Cubic Boron Nitride) abrasives, one of the hardest materials besides diamond! Mounted on your grinder, these wheels will put razor sharp edges on your hardened steel tools – woodturning and carving gouges, chisels, plane blades and other cutting instruments. Each sharpening wheel is precision machined from solid aluminum, balanced, and bonded with fine CBN abrasives that are ideal for sharpening hardened heat-treated steel tools. CBN wheels cut quickly with minimum pressure, stay cool and never needs dressing or shaping. Wheels fit onto grinders with 5/8” shafts and work best on low-speed grinders operating below 2,000 RPMs. | $199.99 | In Stock | Add to cart |
| 1" CBN Wheels | RIKON's PROseries 8" sharpening wheels features CBN (Cubic Boron Nitride) abrasives, one of the hardest materials besides diamond! Mounted on your grinder, these wheels will put razor sharp edges on your hardened steel tools - woodturning and carving gouges, chisels, plane blades and other cutting instruments. Each sharpening wheel is precision machined from solid aluminum, balanced, and bonded with fine CBN abrasives that are ideal for sharpening hardened heat-treated steel tools. CBN wheels cut quickly with minimum pressure, stay cool and never needs dressing or shaping. Wheels fit onto grinders with 5/8" shafts and work best on low-speed grinders operating below 2,000 RPMs. These PROseries CBN wheels feature an 8” diameter with a 1" wide perimeter surface with 1/4" side edges. Each wheel style is available in 80, 180, 350 or 600 grit to offer woodworkers the full range of sharpening from the initial grinding/shaping stage to creating final razor-sharp edges on tools. Note that CBN wheels are not for use with soft carbon steel, aluminum or other soft metals which will ruin the abrasives and void the warranty. Stones are packed in cardboard boxes for safe storage and transporting. • 82-1080 RIKON PROseries 8" x 1" 80 Grit CBN Sharpening Wheel, 5/8" arbor hole • 82-1180 RIKON PROseries 8" x 1" 180 Grit CBN Sharpening Wheel, 5/8" arbor hole • 82-1350 RIKON PROseries 8" x 1" 350 Grit CBN Sharpening Wheel, 5/8" arbor hole • 82-1600 RIKON PROseries 8" x 1" 600 Grit CBN Sharpening Wheel, 5/8" arbor hole | $199.99 | In Stock | Add to cart |
| 10"x 2" CBN Wheels With Square Edge 1" Sides | RIKON PROseries sharpening wheels features CBN (Cubic Boron Nitride) abrasives, one of the hardest materials besides diamond! Mounted on your grinder, these wheels will put razor sharp edges on your hardened steel tools – woodturning and carving gouges, chisels, plane blades and other cutting instruments. Each sharpening wheel is precision machined from solid aluminum, balanced, and bonded with fine CBN abrasives that are ideal for sharpening hardened heat-treated steel tools. CBN wheels cut quickly with minimum pressure, stay cool and never needs dressing or shaping. The 10” Hone Stone fits sharpening systems with 12mm shafts and work best on low-speed grinders operating below 2,000 RPMs. | Price range: $329.99 through $349.99 | In Stock | Add to cart |
CBN SHARPENING STONES
| CBN Bench Stones | RIKON's PROseries double-sided sharpening stones features CBN (Cubic Boron Nitride) abrasives, one of the hardest materials besides diamond! No water is required to put razor sharp edges on your hardened steel tools - knives, chisels, gouges, and other cutting blades. 3 different double-sided CBN stones are available to take you through the full edge sharpening process - 150/250 grits, 300/600 grits and 400/800 grits. A perfect pairing of grits to shape and put sharpened edges on tools. CBN stones measure 7-7/8" x 3" x 3/8" (200mm x 75mm x 10mm) with grit sizes etched on the side of the steel stone for easy identification. CBN abrasives are for sharpening hardened heat[1]treated steel only. Using soft carbon steel, aluminum or other soft metals will ruin the abrasives and void the warranty. Stones are packed in cardboard boxes for safe storage and transporting. 82-1525 RIKON PROseries CBN Bench Stone 8" x 3" 150/250 Grit Double Sided 82-3060 RIKON PROseries CBN Bench Stone 8" x 3" 300/600 Grit Double Sided 82-4080 RIKON PROseries CBN Bench Stone 8" x 3" 400/800 Grit Double Sided | $169.99 | In Stock | Add to cart |
| CBN Credit Card Sharpeners | RIKON's PROseries double-sided credit-card size sharpening stone features CBN (Cubic Boron Nitride) abrasives, one of the hardest materials besides diamond! No water is required to put razor sharp edges on your hardened steel tools - knives, chisels, gouges, and other cutting blades. 82-1122 RIKON PROseries CBN double-sided credit-card 120/220 Grit 82-3560 RIKON PROseries CBN double-sided credit-card 350/600 Grit | Price range: $20.00 through $26.99 | Out of Stock | Add to cart |
GRINDING WHEELS
| P80-800VS-70 | 8" Grinding Wheel 60 Grit, 5/8" Hub | $18.99 | In Stock | Add to cart |
| P80-805-49 | 60 Grit Replacement Wheel | $39.99 | In Stock | Add to cart |
| P80-805-5 | 120 Grit Replacement Wheel | $39.99 | In Stock | Add to cart |
| P80-808-5 | Grinding Wheel 60 Grit 8” x 1” x 5/8” | $16.99 | In Stock | Add to cart |
| P80-808-60 | Grinding Wheel 120 Grit 8” x 1” x 5/8 | $16.99 | In Stock | Add to cart |
| P82-100-21 | Polishing wheel M200x30xM12.5mm | $34.99 | Out of Stock | Add to cart |
| P82-100-9 | Grinding wheel M200×40×M12mm | $29.99 | Out of Stock | Add to cart |
MISC GRINDING/BUFFING/SHARPENING ACCESSORIES
| 80-899 | Wheel Flange for Low Speed Grinder for 80-805 | $4.99 | In Stock | Add to cart |
| 80-901 | 2.5x Magnifying Eye Shield Lens Kit for 80-805 | $10.99 | In Stock | Add to cart |
| 80-902 | Left Hand FLAT Tool Rest for 80-805, 80-808 | $14.99 | In Stock | Add to cart |
| 80-903 | Spherical Washer Set of 3 for Grinders | $14.99 | In Stock | Add to cart |
| 80-910 | Bench Grinder Stand | $129.99 | In Stock | Add to cart |
| 80-911 | Steel Spacer for Grinders
|
$0.49 | In Stock | Add to cart |
| 80-980 | RIKON’s 2” Wide Grinder Guard Kit 80-980 is designed to replace the standard 1” wide wheel guards on RIKON 8” bench grinders. This will allow a variety of wider abrasive, CBN or Diamond wheels to be used on these grinders for more efficient grinding and sharpening of your tools and projects.
|
$89.99 | In Stock | Add to cart |
| 82-901 | Turning Gouge Jig for 82-100, 82-210 | $44.99 | In Stock | Add to cart |
| 82-902 | Carving Tool Jig for 82-100, 82,210 | $31.99 | In Stock | Add to cart |
| P80-800VS-84 | Bulb California Proposition 65 Warning |
$3.22 | In Stock | Add to cart |
| P80-805-54 | Diamond Wheel Dresser | $5.79 | Out of Stock | Add to cart |
| P80-808-40 | Bulb California Proposition 65 Warning |
$5.10 | In Stock | Add to cart |
| P82-100-18 | Knob M6x10 California Proposition 65 Warning |
$0.53 | In Stock | Add to cart |
PRO SHARPENING SYSTEM
| 82-1005 | 82-1005: PRO SHARPENING SYSTEM Sharpen your woodturning tools like a PRO! Used with your 6” or 8” bench grinder, this System includes the basic set-up for putting perfect, sharp edges on gouges, chisels, scrapers and other blades. The 2 adjustable armsallow for easy setting of different grinding angles for your shop tools. Set includes: Locking Base Assemblies (2), Long V-Arm, Short 90 degree Platform Arm, Tool Rest Platform for Short Arm, Adjustable Lever Handle and Mounting Hardware. *80-808 8" GRINDER SOLD SEPARATELY | $159.99 | In Stock | Add to cart |
| 82-1006 | Skew Grinding Jig for 82-1005 Pro Sharpening System | $49.99 | In Stock | Add to cart |
| 82-1007 | Fingernail Gouge Grinding Attachment for 82-1005 | $49.99 | In Stock | Add to cart |
| 82-1008 | Angle Gauge for 82-1005 | $49.99 | In Stock | Add to cart |
WIRE WHEELS
| P80-800VS-37 | 8" Wire Wheel, 5/8" Hub
|
$18.99 | In Stock | Add to cart |
Cordless Tool
CORDLESS TOOLS ACC
| 31-123 | 12V 2.0 Ah Lithium Ion Battery | Original price was: $44.99.$24.00Current price is: $24.00. | In Stock | Add to cart |
| 31-124 | 12V Charger | Original price was: $34.99.$24.00Current price is: $24.00. | In Stock | Add to cart |
| 31-206 | 4” Sponge Pad (EA) | Original price was: $5.99.$3.20Current price is: $3.20. | In Stock | Add to cart |
| 31-207 | 2” (51mm) Hook & Loop Pad (EA) w/10mm Thread | Original price was: $9.99.$6.40Current price is: $6.40. | In Stock | Add to cart |
| 31-208 | 4” (100mm) Hook & Loop Pad (EA) w/10mm Thread | Original price was: $7.99.$4.80Current price is: $4.80. | In Stock | Add to cart |
| 31-209 | 2” Wool Pad (PK5) | Original price was: $12.99.$8.80Current price is: $8.80. | In Stock | Add to cart |
| 31-210 | 4” Wool Pad (PK5) | Original price was: $16.99.$12.00Current price is: $12.00. | In Stock | Add to cart |
| 31-211 | 2” Towel Pad (PK5) | $12.99 | In Stock | Add to cart |
| 31-212 | 4” Towel Pad (PK5) | $16.99 | In Stock | Add to cart |
| 31-213 | 2” Sponge Pad (PK3) | $13.99 | In Stock | Add to cart |
Drill Press/Mortiser
DRILL PRESS & MORTISER
| 12-202 | LED Gooseneck Worklight with Magnetic Base and Magnetic Clip | $69.99 | In Stock | Add to cart |
| 29-202 | Morticing Attachment w/Chisels fits RIKON 13″, 17″, 20″, 34″ Drill Presses. Also fits drill presses with the following quill diameters: 40mm/48mm/50.8mm/55mm/60mm/66mm. | $179.99 | In Stock | Add to cart |
| 29-912 | 1/2" Mortice Chisel/Bit | $24.99 | In Stock | Add to cart |
| 29-913 | 3/8"Mortice Chisel/Bit | $24.99 | In Stock | Add to cart |
| 29-914L | 1/4"Mortice Chisel/Bit (Longer) | $24.99 | In Stock | Add to cart |
| 29-915L | 5/16"Mortice Chisel/Bit (Longer) | $24.99 | In Stock | Add to cart |
Dust Collection
CANNISTER FILTERS
| 60-900 | Filter Canister/Cartridge for 1HP Dust Collector | $399.99 | In Stock | Add to cart |
| 60-905 | Filter Canister/Cartridge for 1.5HP, 2HP Dust Collectors | $160.00 | In Stock | Add to cart |
| 60-914 | Replacement Canister Filter Cartridge for 60-1750 Cyclone Dust Collector | $129.99 | In Stock | Add to cart |
| 60-915 | 60-915: Replacement Canister Filter Cartridge for 60-2500 Cyclone Dust Collector | $149.99 | In Stock | Add to cart |
| 63-915 | Filter Cartridge for 63-100, 63-110 | $39.99 | In Stock | Add to cart |
CLOTH AND PAPER FILTER BAGS
| 60-903 | Dust Filter Cloth Bag (2 Micron) for 60-105 Portable Dust Collector | $34.99 | In Stock | Add to cart |
| 60-918 | Cloth Filter (5 micron) and Plastic Dust Bag Set for 1HP Collectors (2 Pack) | $44.99 | In Stock | Add to cart |
| 60-928 | Cloth Filter (5 micron) and Plastic Dust Bag Set for 1.5, 2HP Collectors (2 Pack) | $64.99 | In Stock | Add to cart |
| 63-920 | Paper Filter Bags for 63-100, 63-110 (5 Pack) | $29.99 | In Stock | Add to cart |
MISC. DUST COLLECTION
| 63-916 |
|
$29.99 | In Stock | Add to cart |
| P60-200-22 | Impeller - Sturdy Metal Design with 7 Rear Facing Blades (Dia. 11-3/4”, Shaft Dia. 20mm, Height 3-1/4”, Shaft Hub Length 1-1/4”) California Proposition 65 Warning |
$119.99 | In Stock | Add to cart |
PLASTIC DUST COLLECTION BAGS
| 60-901 | Plastic Dust Bag for 60-100 1HP Dust Collector 5 pack | $44.99 | Out of Stock | Add to cart |
| 60-902 | Plastic Dust Bag for 60-150, 60-200 1.5, 2HP Dust Collectors (5 Pack) | $49.99 | Out of Stock | Add to cart |
| 60-904 | Plastic Dust Bags for 60-101 1HP Dust Collector 5-Pack | $34.99 | In Stock | Add to cart |
| 60-910 | Plastic Dust Bucket Bags for RIKON 60-1750 Cyclone Dust Collector 5 Pack | $26.99 | In Stock | Add to cart |
| 60-911 | Filter Element Plastic Bags for 60-1750 1.75HP Cyclone Dust Collector 5-Pack | $26.99 | In Stock | Add to cart |
| 60-912 | Filter Element Plastic Bags for 60-2500 2HP Cyclone Dust Collector 5-Pack | $26.99 | In Stock | Add to cart |
| 60-913 | Plastic Dust Bucket Bags for RIKON 60-2500 Cyclone Dust Collector 5-Pack | $26.99 | In Stock | Add to cart |
Lathe
BED EXTENSIONS AND GAP INSERTS
| 70-900B | 24" Bed Extension for 70-100 (Blue) | $229.99 | In Stock | Add to cart |
| 70-901 | Bed Extension 24" for 70-1420VSR / 70-220VSR | $299.99 | In Stock | Add to cart |
| 70-902 | Bed Extension 24” for 70-1218VS | $199.99 | In Stock | Add to cart |
| 70-903 | Bed Extension 13-1/2" for 70-100/70-150VSR/70-1420VSR/70-1516VSR/70-220VSR | $99.99 | In Stock | Add to cart |
| 70-904 | Bed Extension 24" for 70-150VSR / 70-1516VSR | $299.99 | In Stock | Add to cart |
| 70-906 | Bed Extension 21.5” for 70-105 | $149.99 | In Stock | Add to cart |
| 70-907 | Lathe Bed Gap Insert for 70-3040 | $349.99 | In Stock | Add to cart |
| 70-908 | Bed Extension 16" for 70-1824VSR & 70-1824VSR2 | $229.99 | In Stock | Add to cart |
| 70-9083 | Bed Extension Set of 3 for 70-1824VSR/2 Lathe - Includes 70-908, 70-959 & 70-960 70-908 16” BED EXTENSION For 70-1824 70-959 TOOL REST HEIGHT EXTENSION – Raises tool rests 4″ higher when working on larger swing capacity lathes. Has 1″ post and 1″ receiving hole for securing your tool rests with its lever handle. 70-960 Tool Rest Extension – Increases the reach of tool rests for turning surfaces not possible with standard tool rests. Has 1″ post and hole, with 7-1/2″ reach. *Lifestyle shot Banjo and Tools Rest not included | $299.99 | In Stock | Add to cart |
CENTERS AND CENTER POINTS
| 70-940 | Badger Spur Center | $69.99 | Out of Stock | Add to cart |
| 70-942 | 60° Live Center, MT2 | $44.99 | In Stock | Add to cart |
| 70-943 | Spur Center MT2(Black) (Same as P70-100-2) | $24.99 | In Stock | Add to cart |
| 70-945 | Live Center MT2 (Black) (Same as P70-100-55) | $29.99 | In Stock | Add to cart |
| 70-948 | Center Point(Black) (Same as P70-100-1) | $6.99 | In Stock | Add to cart |
DRIVE BELTS
| 70-984 | Drive Belt for 70-1824VSR | $21.99 | In Stock | Add to cart |
| 70-985 | Drive Belt for 70-1420VSR | $21.99 | In Stock | Add to cart |
| 70-986 | Drive Belt (280J5) for 70-150VSR, 70-1516VSR | $19.99 | In Stock | Add to cart |
| 70-987 | Multi V-Belt for 70-3040 | $21.99 | In Stock | Add to cart |
| 70-988 | Drive Belt for 70-105 (645mm) | $12.99 | In Stock | Add to cart |
| 70-989 | Drive Belt for 70-1218VS | $21.99 | In Stock | Add to cart |
| 70-994 | Drive Belt for 70-300, 70-305 | $21.99 | In Stock | Add to cart |
| 70-995 | Drive Belt for 70-100 | $19.99 | In Stock | Add to cart |
| 70-996 | Drive Belt for 70-050, 70-050VS | $23.99 | In Stock | Add to cart |
| 70-997 | Drive Belt for 70-220VSR | $21.99 | In Stock | Add to cart |
| 70-998 | Drive Belt for 70-500 | $34.99 | In Stock | Add to cart |
| 70-999 | Drive Belt for 70-425, 70-450 | $24.99 | Out of Stock | Add to cart |
FACE PLATES
| 70-933 | 3" Face Plate 1 x 8 TPI (Same as P70-100-3) | $29.99 | In Stock | Add to cart |
| 70-934 | 3-3/16” Face Plate 1-1/4” x 8 TPI | $29.99 | In Stock | Add to cart |
| 70-936 | 6" Face Plate 1 x 8 TPI | $34.99 | In Stock | Add to cart |
| 70-937 | 6" Face Plate 1 1/4" x 8 TPI | $44.99 | In Stock | Add to cart |
| 70-990 | Nylon Washer 1-3/8 x 1-3/4
|
$6.99 | In Stock | Add to cart |
| 70-992 | Nylon Washer 1-3/64 x 1-5/8
|
$6.99 | In Stock | Add to cart |
MISCELLANEOUS LATHE ACCESSORIES
| 12-202 | LED Gooseneck Worklight with Magnetic Base and Magnetic Clip | $69.99 | In Stock | Add to cart |
| 30-991 | 5/8" Drill Chuck and Arbor with MT2 Taper | $39.99 | In Stock | Add to cart |
| 70-941 | Double End MT2-MT2 Taper Gauge
|
$26.99 | In Stock | Add to cart |
| 70-971 | Mobility Caster Set for 70-3040 and 70-1824VSR | $299.99 | In Stock | Add to cart |
| 70-990 | Nylon Washer 1-3/8 x 1-3/4
|
$6.99 | In Stock | Add to cart |
| 70-992 | Nylon Washer 1-3/64 x 1-5/8
|
$6.99 | In Stock | Add to cart |
LATHE CHUCKS/JAWS/And ACCESSORIES
| 71-103 | RIKON's Z3 4-Jaw Chuck Kit 71-103 is the perfect wood lathe accessory for turning bowls, platters, spindles and decorative pieces. This 4-Jaw, self-centering chuck is CNC precision-made from high tensile steel with a geared jaw system for easy operation and excellent project holding power. Improved design of the chuck sliders gives added strength for attaching a variety of available jaw set accessories. Meticulously machined chuck body and internal gearing system operates flawlessly for reliable closing and opening operation with the included special Chuck Key.
|
$149.99 | In Stock | Add to cart |
| 71-104 | RIKON's Z4 4-Jaw Chuck Kit 71-104 is the perfect wood lathe accessory for turning bowls, platters, spindles and decorative pieces. This larger, heavy-duty 4-Jaw, self-centering chuck is CNC precision-made from high tensile steel with a geared jaw system for easy operation and excellent project holding power. Improved design of the chuck sliders gives added strength for attaching a variety of available jaw set accessories. Meticulously machined chuck body and internal gearing system operates flawlessly for reliable closing and opening operation with the included special Chuck Key.
|
$179.99 | In Stock | Add to cart |
| 71-105 | RIKON's Z3 4-Jaw Chuck Kit 71-105 is the perfect wood lathe accessory for turning bowls, platters, spindles and decorative pieces. This 4-Jaw, self-centering chuck is CNC precision-made from high tensile steel with a geared jaw system for easy operation and excellent project holding power.
|
$124.99 | In Stock | Add to cart |
| 71-106 | RIKON's Z4 4-Jaw Chuck Kit 71-106 is the perfect wood lathe accessory for turning bowls, platters, spindles and decorative pieces. This larger, heavy-duty 4-Jaw, self-centering chuck is CNC precision-made from high tensile steel with a geared jaw system for easy operation and excellent project holding power. Improved design of the chuck sliders gives added strength for attaching a variety of available jaw set accessories. Meticulously machined chuck body and internal gearing system operates flawlessly for reliable closing and opening operation with the included special Chuck Key.
|
$159.99 | In Stock | Add to cart |
| 71-120 | Chuck Insert M33 x 3.5 ISO RH | $27.99 | In Stock | Add to cart |
| 71-121 | Chuck Insert 1" x 8 TPI UNC RH | $27.99 | In Stock | Add to cart |
| 71-122 | Chuck Insert 1-1/4" x 8 TPI UNS RH | $27.99 | In Stock | Add to cart |
| 71-123 | Chuck Insert M30 x 3.5RH | $27.99 | In Stock | Add to cart |
| 71-124 | Chuck Insert 5/8" Plain Bore | $29.99 | In Stock | Add to cart |
| 71-125 | Chuck Insert 3/4" x 16 TPI RH | $27.99 | In Stock | Add to cart |
| 71-200 | 20mm (0.78") Mini Jaws | $49.99 | In Stock | Add to cart |
| 71-201 | 25mm (1") Mini Jaws | $54.99 | In Stock | Add to cart |
| 71-202 | 28mm (1.1") Mini Step Jaws | $59.99 | In Stock | Add to cart |
| 71-203 | 35mm (1.22") Spigot Jaws | $64.99 | In Stock | Add to cart |
| 71-204 | 50mm (2") Standard Jaws | $59.99 | In Stock | Add to cart |
| 71-205 | 53mm (2.08") Step Jaws | $74.99 | In Stock | Add to cart |
| 71-206 | 70mm (2.75") Standard Jaws | $54.99 | In Stock | Add to cart |
| 71-207 | 75mm (3") Power Grip Jaws | $89.99 | In Stock | Add to cart |
| 71-208 | 45mm (1.8") Spigot Jaws | $79.99 | In Stock | Add to cart |
| 71-209 | 130mm (5") Dovetail Jaws | $79.99 | In Stock | Add to cart |
| 71-210 | 35mm (1.4") Standard Jaws | $49.99 | In Stock | Add to cart |
| 71-211 | 75mm (3") Heavy Bowl and Gripper Jaws | $84.99 | In Stock | Add to cart |
| 71-212 | 75mm (3") Long Nose Jaws | $89.99 | In Stock | Add to cart |
| 71-213 | 17mm (0.7") Pin Jaws with 9mm Bore | $59.99 | In Stock | Add to cart |
| 71-214 | 100mm (4") Dovetail and Deep Gripper Jaws | $69.99 | Out of Stock | Add to cart |
| 71-215 | 31mm (1.22") Mini Spigot Jaws with 13mm Bore | $59.99 | In Stock | Add to cart |
| 71-216 | Pen Jaws | $59.99 | Out of Stock | Add to cart |
| 71-217 | Plastic Soft Jaws | $34.99 | In Stock | Add to cart |
| 71-218 | 254mm (10") Cole Jaws | $74.99 | Out of Stock | Add to cart |
| 71-219 | 203mm (8") Mini Cole Jaws | $74.99 | In Stock | Add to cart |
| 71-220 | 305mm (12") Large Cole Jaws | $109.99 | Out of Stock | Add to cart |
| 71-300 | 50mm (2") Faceplate Ring fits 50mm Jaws | $39.99 | Out of Stock | Add to cart |
| 71-301 | 100mm (4") Faceplate Ring fits 100mm Jaws | $54.99 | In Stock | Add to cart |
| 71-302 | 130mm (5") Faceplate Ring fits 130mm Jaws | $79.99 | In Stock | Add to cart |
| 71-303 | Z3 Chuck 1"x 8 TPI Direct Thread | $119.99 | In Stock | Add to cart |
| 71-304 | Z3 Chuck Insert Type | $119.99 | In Stock | Add to cart |
| 71-305 | Z3 Chuck Key | $19.99 | In Stock | Add to cart |
| 71-315 | Star Screw T20 M6x10 pack of 8 | $12.99 | In Stock | Add to cart |
| 71-316 | Standard Wood Screw RH | $29.99 | In Stock | Add to cart |
| 71-317 | Standard Wood Screw LH | $29.99 | In Stock | Add to cart |
| 71-320 | Z4 Chuck 1-1/4"x 8 TPI Direct Thread | $129.99 | In Stock | Add to cart |
| 71-321 | Z4 Chuck Insert Type | $129.99 | In Stock | Add to cart |
| 71-324 | Z4 Chuck Key | $19.99 | In Stock | Add to cart |
| 71-325 | Rubber Stopper Fastening Kit for Cole Jaws - 8PC | $9.99 | In Stock | Add to cart |
| 71-330 | Z3 Chuck Key with Sliding Handle | $24.99 | In Stock | Add to cart |
LATHE STANDS AND EXTENSIONS
| 70-913 | Lathe Stand Extension for 70-910, 70-920 | $149.99 | In Stock | Add to cart |
| 70-920 | Universal Stand for Mini and MIDI Lathes | $249.99 | In Stock | Add to cart |
| 70-972 | Adjustable Feet for 70-3040 and 70-1824VSR,VSR2
|
$89.99 | In Stock | Add to cart |
TOOL RESTS AND POSTS-PRO SERIES
| 70-951 | 70-951 Small J-Curved Tool Rest - top ONLY
|
$69.99 | In Stock | Add to cart |
| 70-953 | 70-953: Small Curved Tool Rest -Top ONLY
|
$34.99 | In Stock | Add to cart |
| 70-965 | 4-5/16” (110mm) long x 1” dia. Post (includes Spring Washer) for PRO tool rests | $13.99 | In Stock | Add to cart |
| 70-966 | 5-1/8” (130mm) long x 1” dia. Post (includes Spring Washer) for PRO tool rests | $16.99 | In Stock | Add to cart |
| 70-967 | 3-3/4” (95mm) long x 1” dia. Post (includes Spring Washer) for PRO tool rests | $14.99 | In Stock | Add to cart |
| 70-968 | 2-3/4” (70mm) long x 5/8” dia. Post (includes Spring Washer) for PRO tool rests | $12.99 | In Stock | Add to cart |
| 70-969 | 3-3/8" (85mm) long x 1" dia. Post (includes Spring Washer) for PRO tool rests | $14.99 | In Stock | Add to cart |
| 70-970 | 1″ (25.4mm) diameter Spring Washer for PRO tool rests | $7.99 | In Stock | Add to cart |
| 70-975 | 4” Long x 2-3/16” High. Tool Rest Top has a hardened steel rod welded to a steel body. Tool Rest base has a M12 x1.25 threaded hole to install your choice of Post length and diameter with the compression Spring Washer (each sold separately). | $26.99 | In Stock | Add to cart |
| 70-976 | 6” Long x 2-3/16” High Tool Rest Top has a hardened steel rod welded to a steel body. Tool Rest base has a M12 x1.25 threaded hole to install your choice of Post length and diameter with the compression Spring Washer (each sold separately). | $32.99 | In Stock | Add to cart |
| 70-977 | 8” Long x 2-3/16” High Tool Rest Top has a hardened steel rod welded to a steel body. Tool Rest base has a M12 x1.25 threaded hole to install your choice of Post length and diameter with the compression Spring Washer (each sold separately). | $39.99 | In Stock | Add to cart |
| 70-978 | 12” Long x 2-7/32” High Tool Rest Top has a hardened steel rod welded to a steel body. Tool Rest base has a M12 x1.25 threaded hole to install your choice of Post length and diameter with the compression Spring Washer (each sold separately). | $49.99 | In Stock | Add to cart |
TOOL RESTS AND EXTENSIONS–STANDARD
| 70-9158 | 5/8" x 1" Tool Rest Bushing | $19.99 | In Stock | Add to cart |
| 70-924 | 4" Tool Rest 5/8" Post | $24.99 | In Stock | Add to cart |
| 70-926 | 6" Tool Rest 5/8" Post | $29.99 | In Stock | Add to cart |
| 70-928 | 8" Tool Rest 5/8" Post (Same as P70-100-45) | $35.99 | In Stock | Add to cart |
| 70-952 | 70-952 Large J-Curved Tool Rest with 1" Post.
|
$99.99 | Out of Stock | Add to cart |
| 70-954 | 70-954: Large Curved Tool Rest with 1" Post
|
$84.99 | In Stock | Add to cart |
| 70-958 | Tool Rest Base Assembly (banjo) for 70-3040 | $279.99 | In Stock | Add to cart |
| 70-959 | Tool Rest Height Extension
|
$32.99 | In Stock | Add to cart |
| 70-960 | Tool Rest Extension Knuckle
|
$54.99 | In Stock | Add to cart |
4-PIECE TURNING TOOL SET
| 70-800 | 70-800 4-Piece Turning Tool Set with Carbide Insert Cutters | $199.99 | In Stock | Add to cart |
| 70-801 | 16″ Handle only for 70-800 Turning Set | $129.99 | In Stock | Add to cart |
| 70-802 | 6″ Extension Handle only | $42.99 | In Stock | Add to cart |
| 70-803 | Counterweight only | $16.99 | In Stock | Add to cart |
| 70-804 | Side Handle only for 70-800 Turning System | $21.99 | In Stock | Add to cart |
| 70-805 | 8-3/8” Shaft only for 70-800 Turning System | $54.99 | In Stock | Add to cart |
| 70-80512 | 12" Shaft for 70-800 Woodturning System only | $74.99 | In Stock | Add to cart |
TURNING TOOLS AND CUTTERS
| 70-806 | Pan Head Screw M4x 9mm T20 for 70-800 3.2mm Cutters | $1.99 | In Stock | Add to cart |
| 70-807 | Pan Head Screw M4x 10mm T20 for 70-800 5mm Cutters | $1.99 | In Stock | Add to cart |
| 70-810 | Round Carbide Insert Cutter only for 70-800 Turning Set | $13.99 | In Stock | Add to cart |
| 70-8105 | Round Carbide Insert Cutter 14mm only PK5 for 70-800 Turning Set | $59.99 | Out of Stock | Add to cart |
| 70-8105NR | Round Negative Rake Carbide Insert Cutter 14mm only PK5 for 70-800 Turning Set | $64.99 | In Stock | Add to cart |
| 70-810NR | Negative Rake Round Carbide Insert Cutter only for 70-800 Turning System | $16.99 | In Stock | Add to cart |
| 70-811 | Square Carbide Insert Cutter only for 70-800 Turning Set | $13.99 | In Stock | Add to cart |
| 70-8115 | Square Carbide Insert Cutter 13mm only PK5 for 70-800 Turning Set | $59.99 | In Stock | Add to cart |
| 70-8115NR | Square Negative Rake Carbide Insert Cutter 13mm only PK5 for 70-800 Turning Set | $64.99 | In Stock | Add to cart |
| 70-811NR | Negative Rake Square Carbide Insert Cutter only for 70-800 Turning System | $16.99 | In Stock | Add to cart |
| 70-812 | Diamond Carbide Insert Cutter only for 70-800 Turning Set | $13.99 | In Stock | Add to cart |
| 70-8125 | Diamond Carbide Insert Cutter only PK5 for 70-800 Turning Set | $59.99 | In Stock | Add to cart |
| 70-8125NR | Diamond Negative Rake Carbide Insert Cutter only PK5 for 70-800 Turning Set | $64.99 | In Stock | Add to cart |
| 70-812NR | Negative Rake Diamond Carbide Insert Cutter only for 70-800 Turning System | $16.99 | In Stock | Add to cart |
| 70-813 | Detailing 3/16R Carbide Insert Cutter only for 70-800 Turning Set | $18.99 | In Stock | Add to cart |
| 70-814 | R2 Square Carbide Insert Cutter only for 70-800 Turning Set | $13.99 | In Stock | Add to cart |
| 70-8145 | R2 Square Carbide Insert Cutter 14mm only PK5 for 70-800 Turning Set | $59.99 | In Stock | Add to cart |
| 70-8145NR | (5 Pack) R2 Square Negative Rake Carbide Insert Cutter 14mm only PK5 for 70-800 Turning Set | $64.99 | In Stock | Add to cart |
| 70-814NR | Negative Rake R2 Square Carbide Cutter for 70-800 Turning System | $19.99 | In Stock | Add to cart |
| 70-815 | Semi-Circle 20mm Carbide Insert Cutter only for 70-800 Turning Set | $39.99 | In Stock | Add to cart |
| 70-816 | Fingernail Carbide Insert Cutter only for 70-800 Turning Set | $39.99 | In Stock | Add to cart |
| 70-817 | Paisley LEFT Carbide Insert Cutter only for 70-800 Turning Set | $39.99 | In Stock | Add to cart |
| 70-818 | Paisley RIGHT Carbide Insert Cutter only for 70-800 Turning Set | $39.99 | In Stock | Add to cart |
| 70-819 | Detail Diamond Insert Cutter, Carbide, for 70-800 Woodturning Tool | $19.99 | In Stock | Add to cart |
| 70-819NR | Detail Diamond Negative Rake Insert Cutter, Carbide, for 70-800 Woodturning Tool | $19.99 | In Stock | Add to cart |
| 70-821 | MORTISE-TUNGSTEN CARBIDE INSERT CUTTERS These long lasting, extremely hard cutters work through the hardest woods in either a scraping or shear cutting mode. Carbide insert cutters are primarily used for the final shaping and detailing of turnings. The variety of cutter shapes will provide you with many options for shaping and decorating your turnings. Made of premium micrograin carbide, these inserts can be sharpened with diamond abrasives. Simply lap the entire TOP surface only to reveal a new cutting edge. Do not sharpen or change the angle of the bevel edge. | $34.99 | In Stock | Add to cart |
| 70-822 | Tenon - TUNGSTEN CARBIDE INSERT CUTTERS These long lasting, extremely hard cutters work through the hardest woods in either a scraping or shear cutting mode. Carbide insert cutters are primarily used for the final shaping and detailing of turnings. The variety of cutter shapes will provide you with many options for shaping and decorating your turnings. Made of premium micrograin carbide, these inserts can be sharpened with diamond abrasives. Simply lap the entire TOP surface only to reveal a new cutting edge. Do not sharpen or change the angle of the bevel edge. | $34.99 | In Stock | Add to cart |
| 70-823 | 3/16” Beading NEGATIVE RAKE INSERT CUTTERS Developed primarily for use in pen turning using plastics, acrylics, resins and dense woods, these carbide cutters feature an additional top bevel grind. This lower bevel angle reduces the inserts’ cutting action for final shaping of these hard materials. | $34.99 | In Stock | Add to cart |
| 70-824 | 1/8” Beading NEGATIVE RAKE INSERT CUTTERS Developed primarily for use in pen turning using plastics, acrylics, resins and dense woods, these carbide cutters feature an additional top bevel grind. This lower bevel angle reduces the inserts’ cutting action for final shaping of these hard materials. | $34.99 | In Stock | Add to cart |
| 70-825 | 1/4” Beading Negative Rake Insert Cutters: Developed primarily for use in pen turning using plastics, acrylics, resins and dense woods, these carbide cutters feature an additional top bevel grind. This lower bevel angle reduces the inserts’ cutting action for final shaping of these hard materials. | $34.99 | In Stock | Add to cart |
| 70-826 | 3/8” Beading Negative Rake Cutter Inserts Developed primarily for use in pen turning using plastics, acrylics, resins and dense woods, these carbide cutters feature an additional top bevel grind. This lower bevel angle reduces the inserts’ cutting action for final shaping of these hard materials. | $34.99 | In Stock | Add to cart |
| 70-840 | Set of 3 traditional style Bowl Gouges for use with RIKON's 70-800 Woodturning System. Made with M2 High Speed Steel that is noted for resisting high heat and retaining sharp edges. This means you get longer times turning before having to re-sharpen a dull cutting edge.
|
$269.99 | In Stock | Add to cart |
| 70-841 | 3/8" Bowl Gouge Blade only for 70-800 Turning Set Made of M2 HSS and CRYOGENICALLY treated, noted for resisting high heat and retaining sharp cutting edges. | $79.99 | In Stock | Add to cart |
| 70-842 | 1/2" Bowl Gouge Blade only for 70-800 Turning Set Made of M2 HSS and CRYOGENICALLY treated, noted for resisting high heat and retaining sharp cutting edges. | $84.99 | In Stock | Add to cart |
| 70-843 | 5/8" Bowl Gouge Blade only for 70-800 Turning Set made of M2 HSS and CRYOGENICALLY treated, noted for resisting high heat and retaining sharp cutting edges. | $99.99 | In Stock | Add to cart |
| 70-844 | ¾” Bowl Gouge Blade – ONLY for 70-800 Turning Set made of M2 HSS and CRYOGENICALLY treated, noted for resisting high heat and retaining sharp cutting edges. | $149.99 | In Stock | Add to cart |
| 70-850 | Set of 3 traditional style Spindle Gouges for use with RIKON's 70-800 Woodturning System. Made with M2 High Speed Steel that is noted for resisting high heat and retaining sharp edges. This means you get longer times turning before having to re-sharpen a dull cutting edge.
|
$219.99 | In Stock | Add to cart |
| 70-851 | 1/4" Spindle Gouge Blade only for 70-800 Turning Set | $64.99 | In Stock | Add to cart |
| 70-852 | 3/8" Spindle Gouge Blade only for 70-800 Turning Set | $69.99 | In Stock | Add to cart |
| 70-853 | 1/2" Spindle Gouge Blade only for 70-800 Turning Set | $74.99 | In Stock | Add to cart |
| 70-8999 | Assorted Carbide Insert Cutters PK5 for 70-800 Turning Set (2 70-810, 811, 1 70-812) | $59.99 | In Stock | Add to cart |
| 70-949 | 9 Piece Live Center Set | $199.99 | In Stock | Add to cart |
Mobility Kits
MOBILITY KITS
| 13-321 | Mobility Kit for 10-321 | Original price was: $99.99.$80.00Current price is: $80.00. | In Stock | Add to cart |
| 13-324 | Mobility Kit Baseplate Adapter for 10-324 and 10-324TG* *13-324 Mobility Kit Baseplate Adapter is required to use 13-326 Mobility Kit with 10-324 and10-324TG bandsaws. | $89.99 | In Stock | Add to cart |
| 13-326 | Mobility Kit w/Foot Pedal for 10-324*, 10-324TG*, 10-325, 10-326 *13-324 Mobility Kit Baseplate Adapter is required to use 13-326 Mobility Kit with 10-324 and10-324TG bandsaws. |
$119.99 | In Stock | Add to cart |
| 13-345 | Mobility Kit for 10-341, 342, 345, 346, 347, 350, 351, 353, 370 | $119.99 | In Stock | Add to cart |
| 13-913 | Stand for 10” Bandsaws, 10-305, 10-306, 10-3061 | $99.99 | In Stock | Add to cart |
| 23-901 | Flexible/Expandable Roller Stand 200 lb Capacity | $299.99 | In Stock | Add to cart |
| 25-905 | Mobility Kit for 25-210(H) / 25-212H / 25-216H Planer/Jointers. | $169.99 | In Stock | Add to cart |
| 52-910 | 28" Stand; top 22-1/2" x 10-1/2", base 33" x 21" | $139.99 | In Stock | Add to cart |
| 63-900 | Mobility Kit for 63-100, 63-110 | $54.99 | In Stock | Add to cart |
| 70-971 | Mobility Caster Set for 70-3040 and 70-1824VSR | $299.99 | In Stock | Add to cart |
Planers/Jointer
PLANER & JOINTER
| 23-901 | Flexible/Expandable Roller Stand 200 lb Capacity | $299.99 | In Stock | Add to cart |
| 23-959 | Mobility Kit for 20-106H & 20-108H Jointers and 23-150H Planer | Original price was: $99.99.$80.00Current price is: $80.00. | In Stock | Add to cart |
| 25-410 | Metal Stand for 25-130, 25-130H, 25-131, 25-131H | $149.99 | In Stock | Add to cart |
| 25-498 | Replacement T25 Screws for 25-130H Pack Of 10 | $9.99 | In Stock | Add to cart |
| 25-499 | HSS 2-Edge Insert Cutters – 10 PK.
|
$99.99 | In Stock | Add to cart |
| 25-499C | Carbide 2-Edge Insert Cutters – 10 PK
|
$139.99 | In Stock | Add to cart |
| 25-593 | Replacement T25 Screws – 10 PK
|
$10.99 | In Stock | Add to cart |
| 25-594 | Mounting Screws for Helical Inserts Flat Head T25 PK 10 | $11.99 | In Stock | Add to cart |
| 25-599 | Carbide 4-Edge Helical Cutter Inserts – 10 PK
|
$99.99 | In Stock | Add to cart |
| 25-699 | Carbide 4-Edge Helical Cutter Inserts – 10 PK
|
$119.99 | In Stock | Add to cart |
| 25-905 | Mobility Kit for 25-210(H) / 25-212H / 25-216H Planer/Jointers. | $169.99 | In Stock | Add to cart |
| C20-910 | 10" Replacements Knives 3pk for 25-010 | $54.99 | Out of Stock | Add to cart |
| C20-912 | 12" Replacements Knives 3pk for 25-200 | $84.99 | Out of Stock | Add to cart |
| C20-913 | 13" Replacement HCS Knives 2pk for 25-131 | $42.99 | In Stock | Add to cart |
| C20-915 | 15″ Replacement HSS Knives for 23-150 (3 Pack) 15-5/32″ x 1″ x 1/8″ | $74.99 | In Stock | Add to cart |
Replacement Key Switches
REPLACEMENT SWITCH KEYS
| CLSM | Lock Switch Mustard California Proposition 65 Warning |
$1.99 | In Stock | Add to cart |
| CLSR | Switch Key Red California Proposition 65 Warning |
$1.99 | In Stock | Add to cart |
| CLSY | Lock Switch Yellow California Proposition 65 Warning |
$1.99 | In Stock | Add to cart |
Sanding
SANDING BELTS
| 50-2036Z | 2" x 72" 36 Grit Sanding Belt - Zirconia Alumina | $9.99 | In Stock | Add to cart |
| 50-2060Z | 2" x 72" 60 Grit Sanding Belt - Zirconia Alumina | $9.99 | In Stock | Add to cart |
| 50-2080Z | 2" x 72" 80 Grit Sanding Belt - Zirconia Alumina | $9.99 | In Stock | Add to cart |
| 50-3080 | 1"X42" Belt 80 Grit (PK5) California Proposition 65 Warning |
$13.99 | In Stock | Add to cart |
| 50-3120 | 1"X42" Belt 120 Grit (PK5) California Proposition 65 Warning |
$13.99 | In Stock | Add to cart |
| 50-3150 | 1"X42" Belt 150 Grit (PK5) California Proposition 65 Warning |
$13.99 | In Stock | Add to cart |
| 50-3180 | 1"X42" Belt 180 Grit (PK5) California Proposition 65 Warning |
$13.99 | In Stock | Add to cart |
| 50-3220 | 1"X42" Belt 240 Grit (PK5) California Proposition 65 Warning |
$13.99 | In Stock | Add to cart |
| 50-3320 | 1"X42" Belt 320 Grit (PK5) California Proposition 65 Warning |
$13.99 | In Stock | Add to cart |
| 50-3999 | 1"X42" Belt Asst Grit (PK10) California Proposition 65 Warning |
$21.99 | In Stock | Add to cart |
| 50-4080 | 4" x 36"Sanding Belt 80 grit (PK2) California Proposition 65 Warning |
$13.99 | In Stock | Add to cart |
| 50-4120 | 4" x 36" Sanding Belt 120 grit (PK2) California Proposition 65 Warning |
$13.99 | In Stock | Add to cart |
| 50-4150 | 4" x 36" Sanding Belt 150 grit (PK2 California Proposition 65 Warning |
$13.99 | In Stock | Add to cart |
| 50-4180 | 4" x 36"Sanding Belt 180 grit (PK2) California Proposition 65 Warning |
$13.99 | In Stock | Add to cart |
| 50-4220 | 4" x 36" Sanding Belt 240 grit (PK2) California Proposition 65 Warning |
$13.99 | In Stock | Add to cart |
| 50-4999 | 4" x 36" Sanding Belt Asst (2ea 80,150,240 grit) (PK6) California Proposition 65 Warning |
$42.99 | In Stock | Add to cart |
| 50-6080 | 6" x 48"Sanding Belt 80 grit (PK2) California Proposition 65 Warning |
$21.99 | In Stock | Add to cart |
| 50-6120 | 6" x 48" Sanding Belt 120 grit (PK2) California Proposition 65 Warning |
$21.99 | In Stock | Add to cart |
| 50-6150 | 6" x 48" Sanding Belt 150 grit (PK2) California Proposition 65 Warning |
$21.99 | In Stock | Add to cart |
| 50-6180 | 6" x 48"Sanding Belt 180 grit (PK2) California Proposition 65 Warning |
$21.99 | In Stock | Add to cart |
| 50-6220 | 6" x 48" Sanding Belt 240 grit (PK2) California Proposition 65 Warning |
$21.99 | In Stock | Add to cart |
| 50-6999 | 6" x 48" Sanding Belt Asst (2 ea 80,150,240 grit) (PK6) California Proposition 65 Warning |
$42.99 | In Stock | Add to cart |
| 50-9080 | 1" x 30" Belt 80 Grit (Pk 10) California Proposition 65 Warning |
$15.99 | In Stock | Add to cart |
| 50-9120 | 1" x 30" Belt 120 Grit (Pk 10) California Proposition 65 Warning |
$15.99 | In Stock | Add to cart |
| 50-9150 | 1" x 30" Belt 150 Grit (Pk 10) California Proposition 65 Warning |
$15.99 | In Stock | Add to cart |
| 50-9180 | 1" x 30" Belt 180 Grit (Pk 10) California Proposition 65 Warning |
$15.99 | In Stock | Add to cart |
| 50-9220 | 1" x 30" Belt 240 Grit (Pk 10) California Proposition 65 Warning |
$15.99 | In Stock | Add to cart |
| 50-9999 | 1" x 30" Belt Asst Grit 2ea 80,120,150,180, & 240 (Pk 10) California Proposition 65 Warning |
$15.99 | Out of Stock | Add to cart |
SANDING DISCS
SANDING DRIVE BELTS
| 52-911 | Drive Belt for 50-112 (Same as P50-112-70) | $12.99 | In Stock | Add to cart |
| 52-920 | Drive Belt for 50-120 (Same as P50-120-54) | $15.99 | In Stock | Add to cart |
| P50-110-43 | Drive Belt for 50-110 | $9.99 | In Stock | Add to cart |
| P50-114-68 | Drive Belt for 50-114 | $3.99 | In Stock | Add to cart |
| P50-122-8 | Drive Belt for 50-122 (A580) | $3.98 | In Stock | Add to cart |
| P50-142-107 | V-Belt for 50-142 | $9.99 | Out of Stock | Add to cart |
| P50-144-38 | V-Belt for 50-144 | $5.99 | In Stock | Add to cart |
SANDING DRUMS/ SLEEVES
| 50-3001 | 1" Spindle Sanding Drum Assembly California Proposition 65 Warning |
$21.99 | In Stock | Add to cart |
| 50-3002 | 2" Spindle Sanding Drum Assembly California Proposition 65 Warning |
$34.99 | In Stock | Add to cart |
| 50-3003 | 3" Spindle Sanding Drum Assembly California Proposition 65 Warning |
$44.99 | In Stock | Add to cart |
| 50-3012 | 1/2" Spindle Sanding Drum Assembly California Proposition 65 Warning |
$15.99 | In Stock | Add to cart |
| 50-3034 | 3/4" Spindle Sanding Drum Assembly California Proposition 65 Warning |
$18.99 | In Stock | Add to cart |
| 50-3112 | 1 1/2" Spindle Sanding Drum Assembly California Proposition 65 Warning |
$24.99 | In Stock | Add to cart |
| 50-45060 | Spindle Sanding Sleeves 60 Grit, Pack of 5 ( 1 each, 1/2", 3/4, 1", 1 1/2", and 2") California Proposition 65 Warning |
$12.99 | In Stock | Add to cart |
| 50-45100 | Spindle Sanding Sleeves 100 Grit, Pack of 5 ( 1 each, 1/2", 3/4, 1", 1 1/2", and 2") California Proposition 65 Warning |
$12.99 | In Stock | Add to cart |
| 50-45150 | Spindle Sanding Sleeves 150 Grit, Pack of 5 ( 1 each, 1/2", 3/4, 1", 1 1/2", and 2") California Proposition 65 Warning |
$12.99 | In Stock | Add to cart |
| 50-45303 | Spindle Sanding Sleeves 3inch, Pack of 3 (1ea 60,100 & 150 grit) California Proposition 65 Warning |
$12.99 | In Stock | Add to cart |
Stands And Workstations
MACHINERY STANDS
| 13-622 | 13-622 Scroll Saw Stand | $129.99 | In Stock | Add to cart |
| 13-913 | Stand for 10” Bandsaws, 10-305, 10-306, 10-3061 | $99.99 | In Stock | Add to cart |
| 25-410 | Metal Stand for 25-130, 25-130H, 25-131, 25-131H | $149.99 | In Stock | Add to cart |
| 52-910 | 28" Stand; top 22-1/2" x 10-1/2", base 33" x 21" | $139.99 | In Stock | Add to cart |
| 70-913 | Lathe Stand Extension for 70-910, 70-920 | $149.99 | In Stock | Add to cart |
| 70-920 | Universal Stand for Mini and MIDI Lathes | $249.99 | In Stock | Add to cart |
| 80-910 | Bench Grinder Stand | $129.99 | In Stock | Add to cart |
| 98-4600 | Universal Stand with Adjustable legs make this ideal for planers, jointers, scroll saws etc.. • Compact design for easy storage and carrying. • Work platform size: 18” x 23” • Width adjustable from 36” – 72” • Height from work platform is 32” • Legs fold/unfold easily, with spring lock on legs. • Adjustable height 23”- 32” | Original price was: $149.99.$145.00Current price is: $145.00. | In Stock | Add to cart |
ROLLER STANDS
| 23-901 | Flexible/Expandable Roller Stand 200 lb Capacity | $299.99 | In Stock | Add to cart |
SAWHORSES
| 98-2600 | PRO Adjustable Sawhorses have new innovative features that traditional style sawhorses can't compete with. The all-steel construction gives a load capacity rating of 1300 lbs. or 2600 lbs. for a pair!
Sold in Packs of 2 sawhorses.
|
$179.99 | In Stock | Add to cart |
WORKSTATIONS
| 98-5500 | Multifunction Workbench easily converts to work platform with built-in tool tray, (incl. protractor and ruler).
|
$199.99 | In Stock | Add to cart |
Table Saw/Scroll Saw
TABLE SAW/ SCROLL SAW
| 10-9123 | Flex Shaft Attachment for 10-600VS | $24.99 | In Stock | Add to cart |
| 10-9124 | 64 PC Accessory Kit for 10-600VS | $34.99 | In Stock | Add to cart |
| 13-299 | Dado Insert for 10-201 | Original price was: $49.99.$40.00Current price is: $40.00. | In Stock | Add to cart |
| 13-500 | Dado Insert for 10-205 10" Contractors Saw | $29.99 | In Stock | Add to cart |
| 13-600 | Zero Clearance Insert for 10" Portable Table Saw 11-600S | Original price was: $39.99.$32.00Current price is: $32.00. | In Stock | Add to cart |
| 13-622 | 13-622 Scroll Saw Stand | $129.99 | In Stock | Add to cart |
| 90-600 | 99-600 Foot Switch with plug for 22” Scroll Saw | $34.99 | In Stock | Add to cart |
| C10-100 | Safety Push Stick | $7.99 | In Stock | Add to cart |
| P10-600VS-26 | Replacement Bulb 120V/10W | $3.99 | In Stock | Add to cart |
| P10-600VS-96 | Pin-Less Blade Holder | $6.99 | In Stock | Add to cart |
Tool Storage
Tool Storage
| 99-462 | Model 99-462. Heavy Duty Woodworker’s Backpack | Original price was: $69.99.$50.00Current price is: $50.00. | In Stock | Add to cart |
| 99-500 | Turning Tool Roll | $32.99 | In Stock | Add to cart |
Work Light
WORK LIGHTS
| 12-202 | LED Gooseneck Worklight with Magnetic Base and Magnetic Clip | $69.99 | In Stock | Add to cart |
