Model 50-300: Oscillating Spindle Sander

SKU: 50-300 Category:

• 1/2 HP Motor
• Multiple Inserts Included
• Multiple Spindles Included
• Table Tilt 0-45° Forward
• Dual Tool Holders
• 2″ Dust Ports

Oscillating Spindle Sander #50-300 is a specialized sander for the fast and accurate sanding of curved board edges. Abrasive sleeves mounted on the machine’s spindles oscillate up-and-down 15/16″, 29 time per minute while

» Read More

the spindle spins, providing more efficient abrasive cutting action. Powerful 1/2 HP motor, all steel gearing, ample cast iron tilting table, metal housing and 5 spindle diameters (1/2″ – 2″) with 6 table inserts make this a valuable machine for every shop. 4-1/2″ long abrasives. Weighed 76 lbs!

» Read Less

WHERE TO BUY

Tech Specs

Motor Horsepower1/2 HP
Motor Amps3.4 A
Motor Volts110V, 60 Hz
Speed1,700 RPM
Table Size14-3/4” x 14-3/4”
Table Tilt0° to 45° forward
Spindle Length4-1/2” (115mm)
Spindle Diameters1/2”, 3/4”, 1”, 1-1/2”, 2”
Maximum Spindle Diameter Allowed3”
Spindle Oscillation24mm (15/16”)
Oscillations Per Minute29
Dust Outlet50mm (1-3/4” I.D. or 2” O.D.)
Height (overall)23-1/2”
Height (base to table)19”
Width17-1/4”
Depth14-3/4”
Base Size (LxW)11-13/16” x 11”
Sound Power Level78 - 80.1 dB
Sound Pressure Level69.6 - 65.9 dB
Net Weight76 Lbs.
Shipping Weight80 Lbs.
Shipping Carton15-1/2” x 15-1/2” x 19-1/8”

Accessories

50-3001 1" Spindle Sanding Drum Assembly
California Proposition 65 Warning
$19.99 In Stock Add to cart
50-3002 2" Spindle Sanding Drum Assembly
California Proposition 65 Warning
$24.99 In Stock Add to cart
50-3003 3" Spindle Sanding Drum Assembly
California Proposition 65 Warning
$39.99 In Stock Add to cart
50-3012 1/2" Spindle Sanding Drum Assembly
California Proposition 65 Warning
$14.99 In Stock Add to cart
50-3034 3/4" Spindle Sanding Drum Assembly
California Proposition 65 Warning
$16.99 In Stock Add to cart
50-3112 1 1/2" Spindle Sanding Drum Assembly
California Proposition 65 Warning
$22.99 In Stock Add to cart
50-4001 Insert with 32mm hole for 50-300, 1/2"-1" spindles $2.99 In Stock Add to cart
50-4002 Insert for 50-300 with 60mm Hole , 1-1/2" - 1-3/4"- 2" Spindles $2.99 In Stock Add to cart
50-4003 Insert for 50-300 With 84mm Hole, 3" Spindle $2.99 In Stock Add to cart
50-4004 Insert for 50-300 With 32x84mm Oval Hole , 1/2"-1" Spindles $2.99 In Stock Add to cart
50-4006 Insert for 50-300 With 84x109mm Oval Hole , 3" Spindle $2.99 In Stock Add to cart
50-45060 Spindle Sanding Sleeves 60 Grit, Pack of 5 ( 1 each, 1/2", 3/4, 1", 1 1/2", and 2")
California Proposition 65 Warning
$11.99 In Stock Add to cart
50-45100 Spindle Sanding Sleeves 100 Grit, Pack of 5 ( 1 each, 1/2", 3/4, 1", 1 1/2", and 2")
California Proposition 65 Warning
$11.99 In Stock Add to cart
50-45150 Spindle Sanding Sleeves 150 Grit, Pack of 5 ( 1 each, 1/2", 3/4, 1", 1 1/2", and 2")
California Proposition 65 Warning
$11.99 In Stock Add to cart
50-45303 Spindle Sanding Sleeves 3inch, Pack of 3 (1ea 60,100 & 150 grit)
California Proposition 65 Warning
$11.99 In Stock Add to cart

Manuals

Download manual (English)Download manual (Spanish)Download manual (French)

Sell Sheets

Download sell sheet (English)

Parts List

View diagram
50-3001 1" Spindle Sanding Drum Assembly
California Proposition 65 Warning
$19.99 In Stock Add to cart
50-3002 2" Spindle Sanding Drum Assembly
California Proposition 65 Warning
$24.99 In Stock Add to cart
50-3003 3" Spindle Sanding Drum Assembly
California Proposition 65 Warning
$39.99 In Stock Add to cart
50-3012 1/2" Spindle Sanding Drum Assembly
California Proposition 65 Warning
$14.99 In Stock Add to cart
50-3034 3/4" Spindle Sanding Drum Assembly
California Proposition 65 Warning
$16.99 In Stock Add to cart
50-3112 1 1/2" Spindle Sanding Drum Assembly
California Proposition 65 Warning
$22.99 In Stock Add to cart
50-4002 Insert for 50-300 with 60mm Hole , 1-1/2" - 1-3/4"- 2" Spindles $2.99 In Stock Add to cart
50-4003 Insert for 50-300 With 84mm Hole, 3" Spindle $2.99 In Stock Add to cart
50-4004 Insert for 50-300 With 32x84mm Oval Hole , 1/2"-1" Spindles $2.99 In Stock Add to cart
50-4005 Insert For 50-300 With 60x92mm Oval Hole, 1-1/2"-1-3/4"-2" Spindles $2.99 In Stock Add to cart
50-4006 Insert for 50-300 With 84x109mm Oval Hole , 3" Spindle $2.99 In Stock Add to cart
50-45060 Spindle Sanding Sleeves 60 Grit, Pack of 5 ( 1 each, 1/2", 3/4, 1", 1 1/2", and 2")
California Proposition 65 Warning
$11.99 In Stock Add to cart
50-45100 Spindle Sanding Sleeves 100 Grit, Pack of 5 ( 1 each, 1/2", 3/4, 1", 1 1/2", and 2")
California Proposition 65 Warning
$11.99 In Stock Add to cart
50-45150 Spindle Sanding Sleeves 150 Grit, Pack of 5 ( 1 each, 1/2", 3/4, 1", 1 1/2", and 2")
California Proposition 65 Warning
$11.99 In Stock Add to cart
50-45303 Spindle Sanding Sleeves 3inch, Pack of 3 (1ea 60,100 & 150 grit)
California Proposition 65 Warning
$11.99 In Stock Add to cart
P50-300-10B Connection rod $1.99 In Stock Add to cart
P50-300-12B Worm Gear $9.99 In Stock Add to cart
P50-300-14A Washer 6 $0.99 Out of Stock Add to cart
P50-300-15B Motor $99.99 In Stock Add to cart
P50-300-18B Hex set screw with flat M6x6 $0.99 Out of Stock Add to cart
P50-300-20A Tapping screws ST4.0x10 $0.99 Out of Stock Add to cart
P50-300-21B Key 5x5x50 $0.99 In Stock Add to cart
P50-300-23B Connecting Rod Axle $2.99 In Stock Add to cart
P50-300-26A Movable section $4.99 In Stock Add to cart
P50-300-27A Oscillation Assembly $139.04 Out of Stock Add to cart
P50-300-28A Dust Extractor Housing/Port for 50-300 $9.99 In Stock Add to cart
P50-300-2A Worktable bracket (right) $9.99 In Stock Add to cart
P50-300-2B Spindle Bushing w/Plastic Insert $11.99 In Stock Add to cart
P50-300-33A Tool holder for table inserts $9.99 In Stock Add to cart
P50-300-34A Dial indicator $0.99 Out of Stock Add to cart
P50-300-36B Socket head screw M5x6 $0.99 Out of Stock Add to cart
P50-300-37A Stepped bolt $0.99 Out of Stock Add to cart
P50-300-39A Hex bolt M6x12 $0.99 Out of Stock Add to cart
P50-300-3A Worktable bracket (left) $9.99 In Stock Add to cart
P50-300-40A Cone Sleeve $0.99 In Stock Add to cart
P50-300-44A Left-handed nut M10 $0.99 In Stock Add to cart
P50-300-49A Hex nut M8 $0.99 Out of Stock Add to cart
P50-300-50A Rubber washer $0.99 Out of Stock Add to cart
P50-300-51A Nut washer $0.99 Out of Stock Add to cart
P50-300-52A Hex bolt M8x25 $0.99 Out of Stock Add to cart
P50-300-56A Washer 8 $0.99 Out of Stock Add to cart
P50-300-58A Cone sleeve nut $0.99 Out of Stock Add to cart
P50-300-59A Motor Capacitor 24uF 250VAC (Same as P60-105-26A) $9.99 Out of Stock Add to cart
P50-300-5B Worm wheel spindle $9.99 In Stock Add to cart
P50-300-7A Rotation bracket of table (Left) $7.99 In Stock Add to cart
P50-300-8A Rotation bracket of table (Right) $7.99 In Stock Add to cart
P50-300-8B Crank $2.99 In Stock Add to cart
P50-300-9B Worm wheel $4.99 In Stock Add to cart

Features

• 1/2 HP Motor
• Multiple Inserts Included
• Multiple Spindles Included
• Table Tilt 0-45° Forward
• Dual Tool Holders
• 2″ Dust Ports

Compare

 
 
Product Info

Model 50-300: Oscillating Spindle Sander

Model 50-310 Benchtop Oscillating Belt/Spindle Sander

Model 50-320 Benchtop Oscillating Spindle Sander

Sku 50-300 50-310 50-320
Motor Horsepower 1/2 HP 1/2 HP 1/2 HP
Motor Amps 3.4 A 4.3 A 4 A
Motor Volts 110V, 60 Hz 110V, 60 Hz 110V, 60 Hz
Speed 1,700 RPM 2,000 RPM 2,000 RPM
Table Size 14-3/4” x 14-3/4” 12-5/8” x 12” 12-5/8” x 12”
Table Tilt 0° to 45° forward - -
Spindle Length 4-1/2” (115mm) 4-1/2” 4-1/2”
Spindle Diameters 1/2”, 3/4”, 1”, 1-1/2”, 2” 1/2”, 3/4”, 1”, 1-1/2”, 2” 1/2”, 3/4”, 1”, 1-1/2”, 2”, 3"
Maximum Spindle Diameter Allowed 3” - -
Spindle Oscillation 24mm (15/16”) - -
Oscillations Per Minute 29 - -
Dust Outlet 50mm (1-3/4” I.D. or 2” O.D.) 1-1/2” O.D or 1-5/16” ID 1-1/2” O.D or 1-5/16” ID
Height (overall) 23-1/2” 18-1/4” 23-1/2”
Height (base to table) 19” - -
Width 17-1/4” 17 13-3/8”
Depth 14-3/4” 18 14”
Base Size (LxW) 11-13/16” x 11” 16” x 18-1/4” 12-3/8” x 14”
Sound Power Level 78 - 80.1 dB - -
Sound Pressure Level 69.6 - 65.9 dB - -
Net Weight 76 Lbs. 27.5 lbs. 20 lbs.
Shipping Weight 80 Lbs. 31 lbs. 23 lbs.
Shipping Carton 15-1/2” x 15-1/2” x 19-1/8” 21” x 18” x 19”(L x W x H) 18-1/2” x 16” x 20”(L x W x H)
Sanding Belt - 4”x 24” -
Warranty - 5 Years 5 Years