$349.99
Oscillating Belt/Spindle Sander Model 50-310 is a specialized sander for the fast and accurate sanding of curved board edges. The 4” x 24” belt and spindle sandling sleeves oscillate
up-and-down 5/8”, 58 time per minute while the spindle spins, providing more efficient abrasive cutting action. Powerful 1/2 HP motor, ample cast metal table and 5 spindle diameters (1/2” to 2”) with 6 table inserts make this a valuable machine for every shop. Includes 4-1/2” long 80 grit abrasives.
In stock
| Motor Horsepower | 1/2 HP |
| Motor Amps | 4.3 A |
| Motor Volts | 110V, 60 Hz |
| Speed | 2,000 RPM |
| Table Size | 12-5/8” x 12” |
| Spindle Length | 4-1/2” |
| Spindle Diameters | 1/2”, 3/4”, 1”, 1-1/2”, 2” |
| Sanding Belt | 4”x 24” |
| Dust Outlet | 1-1/2” O.D or 1-5/16” ID |
| Height (overall) | 18-1/4” |
| Width | 17 |
| Depth | 18 |
| Base Size (LxW) | 16” x 18-1/4” |
| Net Weight | 27.5 lbs. |
| Shipping Weight | 31 lbs. |
| Shipping Carton | 21” x 18” x 19”(L x W x H) |
| Warranty | 5 Years |
No accessories found
Download sell sheet (English)
| P50-310-1 | Base | $42.99 | Out of Stock | Add to cart |
| P50-310-17 | Main shaft | $15.99 | Out of Stock | Add to cart |
| P50-310-2 | Baseplate | $6.99 | Out of Stock | Add to cart |
| P50-310-3 | Fixed work table | $70.99 | Out of Stock | Add to cart |
| P50-310-31 | Connector | $0.99 | Out of Stock | Add to cart |
| P50-310-38 | Install wire fixing button UL-1/4 | $0.99 | Out of Stock | Add to cart |
| P50-310-4 | Movable work table | $48.99 | Out of Stock | Add to cart |
| P50-310-5 | Pin shaft | $1.99 | Out of Stock | Add to cart |
| P50-310-56 | Power cord with plug 3x18x1.8m | $17.99 | Out of Stock | Add to cart |
| P50-310-59 | Left work table support | $3.99 | Out of Stock | Add to cart |
| P50-310-60 | Right work table support | $3.99 | Out of Stock | Add to cart |
| P50-310-61 | Belt work table cover plate | $1.99 | Out of Stock | Add to cart |
| P50-310-62 | Hex nut M8 | $0.99 | Out of Stock | Add to cart |
| P50-310-63 | Hex screw M8x25 | $0.99 | Out of Stock | Add to cart |
| P50-310-64 | Table locking knob | $1.99 | Out of Stock | Add to cart |
| P50-310-65 | Spring block | $0.99 | Out of Stock | Add to cart |
| P50-310-66 | Phillips screw, spring washer, flat washer assembly M5x8 | $0.99 | Out of Stock | Add to cart |
| P50-310-67 | Fixed slider | $0.99 | Out of Stock | Add to cart |
| P50-310-68 | Screw M6x14 | $0.99 | Out of Stock | Add to cart |
| P50-310-69 | Limiting plate | $2.99 | Out of Stock | Add to cart |
| P50-310-7 | Rubber washer 282x110x1.5mm | $2.99 | Out of Stock | Add to cart |
| P50-310-70 | Limiting plate locking knob | $0.99 | Out of Stock | Add to cart |
| P50-310-71 | Belt support | $27.99 | Out of Stock | Add to cart |
| P50-310-72 | Support cover plate | $13.99 | Out of Stock | Add to cart |
| P50-310-73 | Guide support | $5.99 | Out of Stock | Add to cart |
| P50-310-74 | Belt tension lever | $2.99 | Out of Stock | Add to cart |
| P50-310-75 | Driven shaft | $2.99 | Out of Stock | Add to cart |
| P50-310-76 | Drive drum | $22.99 | Out of Stock | Add to cart |
| P50-310-77 | Driven drum | $12.99 | Out of Stock | Add to cart |
| P50-310-78 | Belt adjusting knob | $0.99 | Out of Stock | Add to cart |
| P50-310-8 | Dust port | $1.99 | Out of Stock | Add to cart |
| P50-310-80 | Belt locking knob | $2.99 | Out of Stock | Add to cart |
| P50-310-81 | Bearing 6001-2RS | $1.99 | Out of Stock | Add to cart |
| P50-310-82 | External Circlip 12 | $0.99 | Out of Stock | Add to cart |
| P50-310-83 | Bearing 6004-2RS | $3.99 | Out of Stock | Add to cart |
| P50-310-84 | Screw M5x35 | $0.99 | Out of Stock | Add to cart |
| P50-310-85 | Non-metallic nut M5 | $0.99 | Out of Stock | Add to cart |
| P50-310-86 | Big flat washer 5 | $0.99 | Out of Stock | Add to cart |
| P50-310-87 | Screw M5x16 | $0.99 | Out of Stock | Add to cart |
| P50-310-88 | Adjustable spring | $0.99 | Out of Stock | Add to cart |
| P50-310-89 | Tension spring | $0.99 | Out of Stock | Add to cart |
| P50-310-90 | Flat washer 5 | $0.99 | Out of Stock | Add to cart |
| P50-310-91 | Rubber washer | $0.99 | Out of Stock | Add to cart |
| P50-310-92 | Phillips screw M5x8 | $0.99 | Out of Stock | Add to cart |
| P50-310-93 | Belt | $2.99 | Out of Stock | Add to cart |
| P50-310-94 | Miter gauge bar | $2.99 | Out of Stock | Add to cart |
| P50-310-95 | Miter gauge | $0.99 | Out of Stock | Add to cart |
| P50-310-96 | Big flat washer 6 | $0.99 | Out of Stock | Add to cart |
| P50-310-97 | Miter gauge knob M6x16 | $0.99 | Out of Stock | Add to cart |
| P50-310-98 | Big flat washer 8 | $0.99 | Out of Stock | Add to cart |
| P50-320-10 | Switch HY7 | $6.99 | Out of Stock | Add to cart |
| P50-320-16 | Retaining Ring 17 | $0.99 | Out of Stock | Add to cart |
| P50-320-17 | Spring cushion | $0.99 | Out of Stock | Add to cart |
| P50-320-18 | Pressure plate with wheel | $1.99 | Out of Stock | Add to cart |
| P50-320-19 | Cog belt 160XLx10mm | $3.99 | Out of Stock | Add to cart |
| P50-320-2 | Self tapping screw ST4.2x12 | $0.99 | Out of Stock | Add to cart |
| P50-320-20 | 70 Tooth wheel | $4.99 | Out of Stock | Add to cart |
| P50-320-21 | 69 Tooth Cog wheel | $3.99 | Out of Stock | Add to cart |
| P50-320-22 | Cog belt 160XLx6mm | $2.99 | Out of Stock | Add to cart |
| P50-320-23 | DC motor | $185.99 | Out of Stock | Add to cart |
| P50-320-24 | Rubber pad | $0.99 | Out of Stock | Add to cart |
| P50-320-25 | Felt pad | $0.99 | Out of Stock | Add to cart |
| P50-320-26 | Press plate | $0.99 | Out of Stock | Add to cart |
| P50-320-27 | Shaft sleeve 2 | $1.99 | Out of Stock | Add to cart |
| P50-320-28 | Semicircle key 5x6.5 | $0.99 | Out of Stock | Add to cart |
| P50-320-3 | Phillips screw, spring washer, flat washer assembly M6x16 | $0.99 | Out of Stock | Add to cart |
| P50-320-30 | Bearing 6203-2RZ | $3.99 | Out of Stock | Add to cart |
| P50-320-31 | Support board | $2.99 | Out of Stock | Add to cart |
| P50-320-32 | Self tapping screw ST4.2x25 | $0.99 | Out of Stock | Add to cart |
| P50-320-33 | Tightening bracket assembly | $3.99 | Out of Stock | Add to cart |
| P50-320-34 | Motor pulley | $3.99 | Out of Stock | Add to cart |
| P50-320-35 | Tightening wheel assembly | $1.99 | Out of Stock | Add to cart |
| P50-320-36 | Non-metallic nut M5 | $0.99 | Out of Stock | Add to cart |
| P50-320-40 | Drum plate | $0.99 | Out of Stock | Add to cart |
| P50-320-42 | Flat washer 8 | $0.99 | Out of Stock | Add to cart |
| P50-320-43 | Nut M8 | $0.99 | Out of Stock | Add to cart |
| P50-320-58 | Wrench | $1.99 | Out of Stock | Add to cart |
| P50-320-59 | Spring | $0.99 | Out of Stock | Add to cart |
| P50-320-6 | Cord joint | $0.99 | Out of Stock | Add to cart |
| P50-320-60 | Shaft sleeve 1 | $1.99 | Out of Stock | Add to cart |
| P50-320-61 | Fuse Link - 5x20mm 10A Glass Fuse 250V | $4.99 | Out of Stock | Add to cart |
| P50-320-62 | Rectifier Bridge | $7.99 | Out of Stock | Add to cart |
| P50-320-9 | Cord Clip 6P4 | $0.99 | Out of Stock | Add to cart |
Compare products |
 Model 50-310 Benchtop Oscillating Belt/Spindle Sander |
 Model 50-300: Oscillating Spindle Sander |
 Model 50-320 Benchtop Oscillating Spindle Sander |
|
|---|---|---|---|---|
| SKU | 50-310 | 50-300 | 50-320 | |
| Motor Horsepower | 1/2 HP | 1/2 HP | 1/2 HP | |
| Motor Amps | 4.3 A | 3.4 A | 4 A | |
| Motor Volts | 110V, 60 Hz | 110V, 60 Hz | 110V, 60 Hz | |
| Speed | 2,000 RPM | 1,700 RPM | 2,000 RPM | |
| Table Size | 12-5/8” x 12” | 14-3/4” x 14-3/4” | 12-5/8” x 12” | |
| Spindle Length | 4-1/2” | 4-1/2” (115mm) | 4-1/2” | |
| Spindle Diameters | 1/2”, 3/4”, 1”, 1-1/2”, 2” | 1/2”, 3/4”, 1”, 1-1/2”, 2” | 1/2”, 3/4”, 1”, 1-1/2”, 2”, 3" | |
| Sanding Belt | 4”x 24” | - | - | |
| Dust Outlet | 1-1/2” O.D or 1-5/16” ID | 50mm (1-3/4” I.D. or 2” O.D.) | 1-1/2” O.D or 1-5/16” ID | |
| Height (overall) | 18-1/4” | 23-1/2” | 23-1/2” | |
| Width | 17 | 17-1/4” | 13-3/8” | |
| Depth | 18 | 14-3/4” | 14” | |
| Base Size (LxW) | 16” x 18-1/4” | 11-13/16” x 11” | 12-3/8” x 14” | |
| Net Weight | 27.5 lbs. | 76 Lbs. | 20 lbs. | |
| Shipping Weight | 31 lbs. | 80 Lbs. | 23 lbs. | |
| Shipping Carton | 21” x 18” x 19”(L x W x H) | 15-1/2” x 15-1/2” x 19-1/8” | 18-1/2” x 16” x 20”(L x W x H) | |
| Warranty | 5 Years | - | 5 Years | |
| Table Tilt | - | 0° to 45° forward | - | |
| Maximum Spindle Diameter Allowed | - | 3” | - | |
| Spindle Oscillation | - | 24mm (15/16”) | - | |
| Oscillations Per Minute | - | 29 | - | |
| Height (base to table) | - | 19” | - | |
| Sound Power Level | - | 78 - 80.1 dB | - | |
| Sound Pressure Level | - | 69.6 - 65.9 dB | - |
Select at least 2 products
to compare
