Model 10-3061: 10″ Deluxe Bandsaw

SKU: 10-3061 Category:

NEW Redesign Features:

  • Easy Fitting Dust Port
  • Sturdy Door Hinges
  • Adjustable Fence Carrier
  • Easy Sliding Rip Fence System
  • Easy cutting adjustments

Standard Features:

  • Patented Spring Loaded Tool-less Guide System
  • Quick-Release Blade Tension Lever
  • 2 Blade Speeds 1,515 or 3,250 ft. / min
  • Powerful 1/2 HP Motor
  • Cutting Height of 5” with 9-5/8” Width

 

The new and improved 10” Bandsaw 10-3061 is a replacement of our previous 10-306 model. Numerous features make this bandsaw extremely easy to operate and make adjustments to the blade, guides and fence. The increased cutting capacity, 2 blade speeds, and increased 1/2HP motor are quite ample enough for smaller projects, and will be appreciated by woodworkers having limited shop space for a larger size bandsaw. Improved features for easy operation – 2 blade speeds, tool-less blade guides, quick-release blade tension lever, tilting 0-45° cast iron table, adjustable rip fence, larger blade tension knob, dust port for shop vacuum hookup, side windows for viewing blade tracking settings, storage hanger for the fence and tools, and safety paddle on/off switch. Reduced size is ideal for transporting, or storing, when not in use. Includes rip fence. Steel stand is available separately.

This redesigned model includes a new 2-1/2” Dust Port which has been moved up from the base and is also now tilted upward 10°, so dust fittings will attach to it easier. The Door Hinges have been redesigned to make them sturdier to avoid breakage. Fence Carrier now has 4 additional plastic inserts in case fence tilt adjustments are needed. Rip Fence is supplied with a plastic pad on its end to allow the fence to slide easier. Lower bandsaw frame construction has been improved for positioning of the Lower Connecting Plate and Guide Assembly. Screws in the lower connecting plate have been changed for easier access with hex wrenches, if plate adjustment is needed. Upper bandsaw frame and guide assembly has been tweaked to ensure a consistent 5” maximum cutting height can be achieved.

 

Tech Specs

Motor Horsepower1/2 HP
Motor Amps5.5
Motor Volts115V, 60Hz
Blade Speed(2) 1,515/ 3,280 ft/min
Cutting Capacity Height5”
Cutting Capacity Width9-5/8”
Blade Width1/8” – 1/2”
Blade Length70-1/2”
Quick Release Blade Tension LeverYes
Table Size13-3/4” x 12-1/2”
Table Left Tilt
Table Right Tilt45°
Table Miter Gauge5/8” x 1/4”
Table Height to Floor39-7/8”
Table Height to Base14-1/2”
Table Fence Size12-1/4” x 2-3/8”
Blade Guide TypeTool-less
Table TrunnionCast Aluminum
Overall Height34-1/4”
Overall Width21”
Overall Depth16-1/4”
Overall Base Size15-7/8” x 9-3/8”
Dust Port2-1/2” O.D., 2-5/16” I.D.
Overall Net Weight77.5 lbs.
Warranty5 Years

Accessories

12-202 LED Gooseneck Worklight with Magnetic Base and Magnetic Clip $69.99 In Stock Add to cart
19-7008 70-1/2" x 5/16" Wide 0.016" Gauge 6 TPI Hook Style $24.99 In Stock Add to cart
C10-109 Guide Bearings for 10-306, 10-3061 ,10-315, 10-320, 10-321, 10-324, 10-324TG, 10-325 (6 Pack)California Proposition 65 Warning $24.99 In Stock Add to cart
C10-394 C10-394: Zero Clearance Table Inserts for 10-305, 10-306 & 10-3061 (Pack 4)   $14.99 In Stock Add to cart

Manuals

Download manual (English)Download manual (Spanish)Download manual (French)

Sell Sheets

Download sell sheet (English)

Parts List

View diagram
C10-393 Table insert (4-Pack) $14.99 In Stock Add to cart
C10-405 Rubber wheel tire (ea,) $14.99 In Stock Add to cart
C10-405U Urethane wheel tire (ea.) $19.99 In Stock Add to cart
C10-990 Rubber V-belt $14.99 In Stock Add to cart
P10-306-1 Upper door assembly $14.99 In Stock Add to cart
P10-306-10 Bandsaw blade $8.99 Out of Stock Add to cart
P10-306-100 Fence carrier $19.99 In Stock Add to cart
P10-306-100A Fence Carrier Assembly w/Leveling Screws (Parts 99/100/101/102/103/160) $29.99 In Stock Add to cart
P10-306-101 Eccentric hand $1.99 In Stock Add to cart
P10-306-102 Mandrel $0.99 In Stock Add to cart
P10-306-103 Plastic spacer $0.99 In Stock Add to cart
P10-306-104 Spacer $0.99 In Stock Add to cart
P10-306-105 Lock frame $3.99 Out of Stock Add to cart
P10-306-106 Fence assembly $9.99 In Stock Add to cart
P10-306-107 Heel block $2.99 Out of Stock Add to cart
P10-306-108 Hex socket cap screw M6X12 $0.99 In Stock Add to cart
P10-306-109 Spring washer $0.99 In Stock Add to cart
P10-306-11 Retaining ring 12 $0.99 In Stock Add to cart
P10-306-110 Nut $0.99 In Stock Add to cart
P10-306-111 End cap $0.99 In Stock Add to cart
P10-306-112 Square neck bolt M6X16 $0.99 Out of Stock Add to cart
P10-306-113 Wing nut $0.99 In Stock Add to cart
P10-306-114 Flat washer $0.99 Out of Stock Add to cart
P10-306-115 Support $6.99 Out of Stock Add to cart
P10-306-116 Flange nut $0.99 Out of Stock Add to cart
P10-306-116A Set screw M5X6 $0.99 Out of Stock Add to cart
P10-306-117 Hex socket cap screw M4X10 $0.99 Out of Stock Add to cart
P10-306-118 Stopper $0.99 Out of Stock Add to cart
P10-306-119 Upper table trunion $9.99 Out of Stock Add to cart
P10-306-12 Hex lock nut M6 $0.99 Out of Stock Add to cart
P10-306-120 Indicator $0.99 Out of Stock Add to cart
P10-306-121 Tapping screw $0.99 Out of Stock Add to cart
P10-306-122 Slinding block $0.99 In Stock Add to cart
P10-306-123 Square neck bolt M6X35 $0.99 Out of Stock Add to cart
P10-306-124 Table assembly $89.99 Out of Stock Add to cart
P10-306-125 Hex socket cap screw M6X30 $0.99 In Stock Add to cart
P10-306-126 Flat washer $0.99 In Stock Add to cart
P10-306-127 Wing nut $0.99 In Stock Add to cart
P10-306-128 Washer $0.99 In Stock Add to cart
P10-306-129 Hex bolt M6X12 $0.99 In Stock Add to cart
P10-306-13 Bushing $0.99 Out of Stock Add to cart
P10-306-130 Hex socket set screw with cup point M6X16 $0.99 In Stock Add to cart
P10-306-131 Support shaft $1.59 In Stock Add to cart
P10-306-132 Front adjust shaft $1.69 In Stock Add to cart
P10-306-133 Back-up block $3.99 In Stock Add to cart
P10-306-134 Clamp handle $0.99 In Stock Add to cart
P10-306-135 Screw M4X16 $0.99 In Stock Add to cart
P10-306-136 Screw M5X10 $0.99 Out of Stock Add to cart
P10-306-137 Locking plate $3.99 Out of Stock Add to cart
P10-306-138 Rack $0.99 Out of Stock Add to cart
P10-306-139 Square neck bolt M6X50 $0.99 Out of Stock Add to cart
P10-306-14 Hex socket head cap screw M6X25 $0.99 Out of Stock Add to cart
P10-306-140 Lift hand $0.99 Out of Stock Add to cart
P10-306-141 Clamp handle $0.99 In Stock Add to cart
P10-306-142 Washer $0.99 Out of Stock Add to cart
P10-306-143 Spring $0.99 Out of Stock Add to cart
P10-306-144 Adjustable pad $0.99 Out of Stock Add to cart
P10-306-145 Wheel gear $0.99 Out of Stock Add to cart
P10-306-146 Roll pin $0.99 Out of Stock Add to cart
P10-306-147 Sliding plate $0.36 Out of Stock Add to cart
P10-306-148 Blade guide $13.99 Out of Stock Add to cart
P10-306-149 Cross recess pan head screw M3X4 $0.99 Out of Stock Add to cart
P10-306-15 Handle end knob $1.99 In Stock Add to cart
P10-306-150 Flat washer $0.99 Out of Stock Add to cart
P10-306-151 Clamp handle $0.99 In Stock Add to cart
P10-306-152 Cover $0.99 In Stock Add to cart
P10-306-153 Upper blade guide assembly $9.99 In Stock Add to cart
P10-306-154 Rear adjust shaft $1.99 In Stock Add to cart
P10-306-155 Lower wheel belt pulley $5.99 Out of Stock Add to cart
P10-306-156 Lower wheel $21.99 Out of Stock Add to cart
P10-306-157 Spring washer $0.99 Out of Stock Add to cart
P10-306-158 Screw M5X12 $0.99 Out of Stock Add to cart
P10-306-159 Plastic spacer $0.99 In Stock Add to cart
P10-306-16 Pilot pin $2.99 Out of Stock Add to cart
P10-306-160 Plastic screw $0.99 In Stock Add to cart
P10-306-161 Hex nut M4 $0.99 Out of Stock Add to cart
P10-306-162 Suction port (10-3061 Only) $5.99 Out of Stock Add to cart
P10-306-17 Connecting plate $1.99 In Stock Add to cart
P10-306-18 Tension bracket assembly $6.99 In Stock Add to cart
P10-306-19 Spring washer $0.99 In Stock Add to cart
P10-306-2 Star lock washer $0.99 In Stock Add to cart
P10-306-20 Tension handle $4.99 In Stock Add to cart
P10-306-21 Tension rod assembly $4.99 In Stock Add to cart
P10-306-22 Upper cam wheel $2.99 In Stock Add to cart
P10-306-23 Quick release lever with cam wheel $4.99 In Stock Add to cart
P10-306-24 Axial needle and cage assembly $3.99 Out of Stock Add to cart
P10-306-25 Pressure spring $1.99 Out of Stock Add to cart
P10-306-26 Hex bolt $0.99 Out of Stock Add to cart
P10-306-27 Flat washer $0.99 Out of Stock Add to cart
P10-306-28 Hex nut M10 $0.99 Out of Stock Add to cart
P10-306-29 Connecting plate $2.99 In Stock Add to cart
P10-306-3 Mount shaft $0.99 In Stock Add to cart
P10-306-30 Flange nut $0.99 Out of Stock Add to cart
P10-306-31 Hex socket set screw M6X10 $0.99 Out of Stock Add to cart
P10-306-32 Motor belt pulley $4.99 Out of Stock Add to cart
P10-306-34 Lower wheel assembly (see #155-158) $21.99 In Stock Add to cart
P10-306-35 Self-plugging rivet $0.99 Out of Stock Add to cart
P10-306-36 Leaf spring $0.99 Out of Stock Add to cart
P10-306-37 Cross recess pan head screw M4X10 $0.99 In Stock Add to cart
P10-306-38A Hinge assembly $0.99 In Stock Add to cart
P10-306-39 Thread plate $0.99 Out of Stock Add to cart
P10-306-4 Blade tensioner $3.99 In Stock Add to cart
P10-306-40 Hex nut M4 $0.99 Out of Stock Add to cart
P10-306-41 Lower door assembly $16.99 Out of Stock Add to cart
P10-306-42 Round head hex socket bolts M5X8 $0.99 Out of Stock Add to cart
P10-306-43 Ratchet handle $2.99 Out of Stock Add to cart
P10-306-44 Hex socket set screw with flat point M6X12 $0.99 Out of Stock Add to cart
P10-306-45 Connecting plate $1.99 In Stock Add to cart
P10-306-46 Spring 0.5 $0.99 In Stock Add to cart
P10-306-47 Lower guide assembly $9.99 In Stock Add to cart
P10-306-48 Bearing $1.99 Out of Stock Add to cart
P10-306-49 Locking handle $0.99 In Stock Add to cart
P10-306-5 Upper bearing bolt $3.99 Out of Stock Add to cart
P10-306-50 Bearing bushing $0.99 In Stock Add to cart
P10-306-51 Flat washer $0.99 In Stock Add to cart
P10-306-52 Spring 0.5 $0.99 In Stock Add to cart
P10-306-53 Adjusting spindle $1.99 In Stock Add to cart
P10-306-54 Square neck bolt $0.99 In Stock Add to cart
P10-306-55 Brush $0.99 In Stock Add to cart
P10-306-56 Key switch $7.99 In Stock Add to cart
P10-306-57 Hex nut with flange M8 $0.99 Out of Stock Add to cart
P10-306-58 Cross recess pan head screw M4X16 $0.99 Out of Stock Add to cart
P10-306-59 Switch panel $0.99 In Stock Add to cart
P10-306-6 Upper wheel $13.99 In Stock Add to cart
P10-306-61 Power plug $7.99 In Stock Add to cart
P10-306-62 Hanging panel $0.99 In Stock Add to cart
P10-306-63 Cross recessed countersunk head screw M4X10 $0.99 In Stock Add to cart
P10-306-64 Top plug $1.99 In Stock Add to cart
P10-306-65 Washer $0.99 In Stock Add to cart
P10-306-66 Wing nut $0.99 Out of Stock Add to cart
P10-306-67 Handlebar $3.99 Out of Stock Add to cart
P10-306-68 Tool holder $0.99 Out of Stock Add to cart
P10-306-69 Hex nut M5 $0.99 Out of Stock Add to cart
P10-306-7 Bearing $1.99 In Stock Add to cart
P10-306-70 Hex socket cap screw M5X25 $0.99 Out of Stock Add to cart
P10-306-71 Hex socket cap screw M5X12 $0.99 Out of Stock Add to cart
P10-306-72 Window $0.99 In Stock Add to cart
P10-306-73 Strain relief nut $0.99 Out of Stock Add to cart
P10-306-74 Strain relief $0.99 Out of Stock Add to cart
P10-306-75 Dust cover $0.99 In Stock Add to cart
P10-306-76 Flat washer $0.99 Out of Stock Add to cart
P10-306-77 Screw M8X30 $0.99 Out of Stock Add to cart
P10-306-78 Spring washer $0.99 Out of Stock Add to cart
P10-306-79 Screw M8X30 $0.99 Out of Stock Add to cart
P10-306-8 Retaining ring 28 $0.99 Out of Stock Add to cart
P10-306-80 Lower wheel shaft $3.99 Out of Stock Add to cart
P10-306-81 Hex bolt M6X20 $0.99 Out of Stock Add to cart
P10-306-82 Hex nut M6 $0.99 Out of Stock Add to cart
P10-306-83 Nut M14 $0.99 Out of Stock Add to cart
P10-306-84 Circlip for shaft $0.99 In Stock Add to cart
P10-306-85 Washer $0.99 Out of Stock Add to cart
P10-306-86 Hex nut M6 $0.99 In Stock Add to cart
P10-306-87 Hex bolt M6X35 $0.99 In Stock Add to cart
P10-306-88 Motor $182.99 Out of Stock Add to cart
P10-306-88A Motor Capacitor 25MFD/300VAC $6.99 In Stock Add to cart
P10-306-89 Hex locking nut M6 $0.99 Out of Stock Add to cart
P10-306-90 Handlebar B-3-7-1 $0.99 Out of Stock Add to cart
P10-306-91 Hex socket cap screw M6X20 $0.99 Out of Stock Add to cart
P10-306-92 Rubber bushing $0.99 Out of Stock Add to cart
P10-306-93 Cable pressing plate $0.99 Out of Stock Add to cart
P10-306-94 Cross recess pan head screw M5X10 $0.99 Out of Stock Add to cart
P10-306-95 Cross recess pan head screw M4X5 $0.99 In Stock Add to cart
P10-306-96 Guide rail $24.99 In Stock Add to cart
P10-306-97 Star knob screw $0.99 Out of Stock Add to cart
P10-306-98 Scale $0.99 In Stock Add to cart
P10-306-99 Plastic screw $0.99 In Stock Add to cart
P10-3061-103A Nylon Screw for Fence $1.99 Out of Stock Add to cart

Features

NEW Redesign Features Include:

  • Easy Fitting Dust Port
  • Sturdy Door Hinges
  • Adjustable Fence Carrier
  • Easy Sliding Rip Fence System
  • Improved Frame
  • Easy access screws

Standard Features:

  • Patented Spring-Loaded Tool-less Guide System
  • Quick-Release Blade Tension Lever
  • 2 Blade Speeds 1,515 or 3,250 ft. / min
  • More Powerful 1/2 HP Motor
  • Convenient 45° Table Tilting Stop
  • Increased Cutting Height of 5” with 9-5/8” Width

Compare

 
 
Product Info

Model 10-3061: 10" Deluxe Bandsaw

Model 10-306: 10" Deluxe Bandsaw

Model 10-305: 10" Bandsaw

Sku 10-3061 10-306 10-305
Motor Horsepower 1/2 HP 1/2 HP 1/3 HP
Motor Amps 5.5 5.5 3.5
Motor Volts 115V, 60Hz 115V, 60Hz 115V, 60Hz
Blade Speed (2) 1,515/ 3,280 ft/min (2) 1,515/ 3,280 ft/min 2,780 ft/min
Cutting Capacity Height 5” 5” 4-5/8”
Cutting Capacity Width 9-5/8” 9-5/8” 9-5/8”
Blade Width 1/8” – 1/2” 1/8” – 1/2” 1/8” – 1/2”
Blade Length 70-1/2” 70-1/2” 70-1/2”
Quick Release Blade Tension Lever Yes Yes No
Table Size 13-3/4” x 12-1/2” 13-3/4” x 12-1/2” 13-3/4” x 12-1/2”
Table Left Tilt
Table Right Tilt 45° 45° 45°
Table Miter Gauge 5/8” x 1/4” 5/8” x 1/4” 5/8” x 1/4”
Table Height to Floor 39-7/8” 39-7/8” 39-7/8”
Table Height to Base 14-1/2” 14-1/2” 14-1/2”
Table Fence Size 12-1/4” x 2-3/8” 12-1/4” x 2-3/8” 13-1/2” x 1” x 2”
Blade Guide Type Tool-less Tool-less Standard
Table Trunnion Cast Aluminum Cast Aluminum Cast Aluminum
Overall Height 34-1/4” 34-1/4” 33-1/4”
Overall Width 21” 21” 21”
Overall Depth 16-1/4” 16-1/4” 15-1/4”
Overall Base Size 15-7/8” x 9-3/8” 15-7/8” x 9-3/8” 15-7/8” x 9-3/8”
Dust Port 2-1/2” O.D., 2-5/16” I.D. 2-1/2” O.D., 2-1/4” I.D. 2-1/2” O.D., 2-1/4” I.D.
Overall Net Weight 77.5 lbs. 77.5 lbs. 68 lbs.
Warranty 5 Years 5 Years 5 Years