FAQ
RIKON products are sold exclusively through retailers. You can find a retailer near you here on our official website by clicking here.
RIKON Power Tools, Inc. (Seller) warrants to only the original retail consumer/purchaser of our products that each product be free from defects in materials and workmanship for a period of five (5) years from the date the product was purchased at retail. This warranty may not be transferred.
This warranty does not apply to defects due directly or indirectly to misuse, abuse, negligence, accidents, repairs, alterations, lack of maintenance or normal wear and tear. Under no circumstances will Seller be liable for incidental or consequential damages resulting from defective products. All other warranties, expressed or implied, whether of merchantability, fitness for purpose, or otherwise are expressly disclaimed by Seller. This warranty does not cover products used for commercial, industrial or educational purposes.This limited warranty does not apply to accessory items such as blades, drill bits, sanding discs or belts and other related items.
Seller shall in no event be liable for death, injuries to persons or property, or for incidental, contingent, special, or consequential damages arising from the use of our products.To take advantage of this warranty, contact us by mail, phone, or e-mail. Proof of purchase documentation, which includes date of purchase and an explanation of the complaint, must be provided.
The Seller reserves the right to effect at any time, without prior notice, those alterations to parts, fittings, and accessory equipment which they may deem necessary for any reason whatsoever. Click here to view our full warranty
To order parts, please call our technical support department at 877-884-5167.
Suggested retail pricing can be obtained by calling RIKON at 877-884-5167. However, pricing may vary by retailer.
We do require our products to be registered. For warranty protection please save your dated cash register receipt as proof of purchase. If warranty service becomes necessary, your dated cash register receipt will help the technical service advisor to expedite your repairs. Serial numbers and manufacturing date codes may not be sufficient evidence of warranty coverage.
Manuals are in our support page, or you can contact us at 877-884-5167.
Parts Breakdowns are available, you can contact us at 877-884-5167.
You can contact Customer Service by emailing techsupport@rikontools.com or calling 877-884-5167.
Submit your ideas and suggestions to webmaster@rikontools.com or mail to:
RIKON Power Tools
16 Progress Road
Billerica, MA. 01821
You can contact us at 877-884-5167.
Please contact Customer Service at 877-884-5167.
All shipments should be unpacked and closely inspected upon receipt by the buyer for damage and/or loss. For its protection, the buyer must sign by piece; note any damage, suspected damage or loss on the freight bill at the time of delivery. If any damage or loss is noted on the freight bill the buyer must save all packing material for carrier inspection. Any subsequent freight claims must then be made directly by the buyer against the delivering carrier, including any claims for concealed damage and/or loss. RIKON Power Tools will render all possible assistance with such claims.
Store Pick-Up: You should contact us at 877-884-5167 or email techsupport@rikontools.com
You can enter our mailing list by Clicking Here. RIKON will retain this information for possible future mailings.
Once a new product is available for sale, RIKON will update this website to include any and all new products available.
Prior to cleaning any tool, first unplug from the power source. All Cast Iron surfaces should be cleaned with WD40 type product. After this cleaning, an application of a sealant to protect the surface. Top-Cote spray is a powerful anti-corrosive, low friction, durable coating, as well as a sealant. Use it on your table saw top, jointer bed, hand tools, or any metal surface for maximum protection against friction and rust. Top-Cote is low temperature rated and is formulated specifically for surface coating. Another brand of table-top surface lubricant is Empire. Empires micro lubrication technology bonds to your machines cast iron surface structure and reduce sliding friction between wood and metal surfaces. It eliminates board hang-up and binding for smoother material feed. Contains no silicone or petroleum oils. Perfect for all saw tables, jointer and planer beds, drill press tables, sander tops, and power and hand planes. It also helps to prevent corrosion.
Painted or Plastic Surfaces: Mild solutions of detergents will aid in removing most dirt. Do not use scouring powders or solvents as they will scuff or dull the finish. Try to keep water away from non painted metal surfaces. Do not use glass cleaner as it will promote rust. Wipe dry all surfaces after cleaning.
Bare Metal Surfaces: Non painted metal surfaces and castings should be cleaned with quality metal polishes and sealers. Try not to get metal polish on painted surfaces as it may dull the finish. Do not use glass cleaner as it will promote rust. Wipe dry all surfaces after cleaning.
Unplug power tools before cleaning or performing maintenance. All gear operated mechanisms require quality non-aerosol white lithium grease. Areas to grease include guide post rack and pinion assemblies and table trunnions on bandsaws as well as table raise/lower gears and spindles on drill presses. Other areas to use white lithium grease also include threaded assemblies for blade tension and drive belt tension in bandsaws and in trunnion assemblies on table saws. Light oil can be used on friction areas such as door/lid hinges and wheel axles. Contact Technical Support at 877-884-5167 for detailed information about specific models.
Certain blade manufacturers cut their blades at different lengths. Some can be up to 3/8" oversized causing lack of tension.
Not at this time.
4.5 Amps
1/3 HP
Standard 110 Volt
Download Manual or contact us at 1-877-884-5167.
Your local distributor can order them for you or you can contact us at 1-877-884-5167.
Please contact us at 1-877-884-5167.
Full List of Distributors is available at rikontools.com or you can call us at 1-877-884-5167.
This would depend on the type of saw operation and the material being cut. Call our Tech Support Staff at 1-877-884-5167 for more information.
You can increase or decrease blade tension by turning the blade tension knob. The blade tension knob is located on top of the upper wheel housing.
Simply loosen the two motor bolts and pivot the motor to the desired tension.
The Serial number can be found on the back of the upper wheel casing.
Standard 4".
60" tall.
9"
Steel.
32.25"L x 15"W x 60"H 66LBS
7 Amps
1 HP
Standard 110 Volt
Download Manual or contact us at 1-877-884-5167.
Your local distributor can order them for you or you can contact us at 1-877-884-5167.
Please contact us at 1-877-884-5167.
A Full List of Distributors is available at rikontools.com or you can call us at 1-877-884-5167.
The Serial number can be found on the rear of the bag housing.
Two @4" and one @5".
76-1/2" tall
12"
Steel.
37"L x 22"W x 76-1/2"H 104LBS
16 Amps
2 HP
Standard 110 Volt
Download Manual or contact us at 1-877-884-5167.
Your local distributor can order them for you or you can contact us at 1-877-884-5167.
Please contact us at 1-877-884-5167.
A Full List of Distributors is available at rikontools.com or you can call us at 1-877-884-5167.
The Serial number can be found on the rear of the fan housing above the motor.
The pulley covers are press formed form a single sheet of 16GA steel.
The standard drill press models have a cast iron handle, the radical drill presses are metal.
Our quills are measured in standard inch units.
Download Manual or contact us at 1-877-884-5167.
Your local distributor can order them for you or you can contact us at 1-877-884-5167.
Please contact us at 1-877-884-5167.
A Full List of Distributors is available at rikontools.com or you can call us at 1-877-884-5167.
The serial number can be found on the left side of the drill press head near the return spring.
The pulley covers are press formed form a single sheet of 16GA steel.
The standard drill press models have a cast iron handle, the radical drill presses are metal.
Our quills are measured in standard inch units.
Download Manual or contact us at 1-877-884-5167.
Your local distributor can order them for you or you can contact us at 1-877-884-5167.
Please contact us at 1-877-884-5167.
A Full List of Distributors is available at rikontools.com or you can call us at 1-877-884-5167.
The serial number can be found on the left side of the drill press head near the return spring.
The pulley covers are press formed form a single sheet of 16GA steel.
The standard drill press models have a cast iron handle, the radical drill presses are metal.
Our quills are measured in standard inch units.
Download Manual or contact us at 1-877-884-5167.
Your local distributor can order them for you or you can contact us at 1-877-884-5167.
Please contact us at 1-877-884-5167.
A Full List of Distributors is available at rikontools.com or you can call us at 1-877-884-5167.
The serial number can be found on the left side of the drill press head near the return spring.
The pulley covers are press formed form a single sheet of 16GA steel.
The standard drill press models have a cast iron handle, the radical drill presses are metal.
Our quills are measured in standard inch units.
Download Manual or contact us at 1-877-884-5167.
Your local distributor can order them for you or you can contact us at 1-877-884-5167.
Please contact us at 1-877-884-5167.
A Full List of Distributors is available at rikontools.com or you can call us at 1-877-884-5167.
The serial number can be found on the left side of the drill press head near the return spring.
The pulley covers are press formed form a single sheet of 16GA steel.
The standard drill press models have a cast iron handle, the radical drill presses are metal.
Our quills are measured in standard inch units.
Download Manual or contact us at 1-877-884-5167.
Your local distributor can order them for you or you can contact us at 1-877-884-5167.
Please contact us at 1-877-884-5167.
A Full List of Distributors is available at rikontools.com or you can call us at 1-877-884-5167.
The serial number can be found on the left side of the drill press head near the return spring.
1" x 8TPI
40", each extension is 24" long.
MT-2
Easiest on the market! Simply lower the over sized belt over for easy access to the pulleys.
The best way is to use a plastic washer between the faceplate and spindle face. This will prevent chucks and face plates from binding to the spindle face. Stock #70-990.
6.6 Amps
1/2 HP
Standard 110 Volt
Download Manual or contact us at 1-877-884-5167.
Your local distributor can order them for you or you can contact us at 1-877-884-5167.
Please contact us at 1-877-884-5167.
A Full List of Distributors is available at rikontools.com or you can call us at 1-877-884-5167.
The serial number can be found on the back center portion of the lathe.
Aluminum.
Sturdy cast iron to help reduce vibration.
Yes, one dust outlet is moulded to work on both the belt and the disc.
Yes.
You can contact specialty sand paper suppliers for a conversion kit.
10 Amps
3/4 HP
Standard 110 Volt
Download Manual or contact us at 1-877-884-5167.
Your local distributor can order them for you or you can contact us at 1-877-884-5167.
Please contact us at 1-877-884-5167.
A Full List of Distributors is available at rikontools.com or you can call us at 1-877-884-5167.
The serial number can be found on the back near the drive belt cover.
Steel
Sturdy cast iron to help reduce vibration.
Cast iron.
Yes.
You can contact specialty sand paper suppliers for a conversion kit.
6 Amps
1/2 HP
Standard 110 Volt
Download Manual or contact us at 1-877-884-5167.
Your local distributor can order them for you or you can contact us at 1-877-884-5167.
Please contact us at 1-877-884-5167.
A Full List of Distributors is available at rikontools.com or you can call us at 1-877-884-5167.
The serial number can be found on the back.
Tools
California requires the following notice:
WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Some examples of these chemicals are: lead from lead-based paints, crystalline silica from bricks and cement and other masonry products, and arsenic and chromium from chemically treated lumber. Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce your exposure, work in a well-ventilated area and with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles.
Electrical Cords
California requires the following notice:
WARNING: The wires of this product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.
For more information go to www.P65Warnings.ca.gov/wood